Pembuatan Tungku Pembakaran Logam

Authors

  • Afrionaldi Putra Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti
  • Mukhnizar Mukhnizar Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti
  • Veny Selviyanty Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti
  • Risal Abu Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti
  • Afdal Afdal Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti

DOI:

https://doi.org/10.31004/jutin.v7i1.25496

Keywords:

Furnace, air pressure, combustion flame

Abstract

Current technological advances have produced many products that aim to make human work easier. One of them is an iron burning tool that uses a blower as a tool used to increase or enlarge the air or gas pressure that will flow into the combustion container (furnace). The blower used is a 2 inch snail blower as a tool to increase the air pressure so that the air that is supplied can enlarge the burning flame. The furnace used is a drum coated with heat-resistant cement which can withstand the heat of the combustion fire so that the furnace does not melt. The frame materials used are hollow iron measuring 40 x 40 and angle iron measuring 40x40. For combustion, it uses coal as the main fuel and the blower itself as an air distributor so that it can produce the desired fire. Based on the test results in a metal burning furnace, a temperature of 340°C can be obtained as planned so that by heating the metal, various types of equipment can be formed as desired

References

Efira. (2022). Jangka Sorong: Bagian, Fungsi, Cara Menggunakan dan Menghitung. Diunduh pada tanggal 23 Mei 2023, dari Jangka Sorong: Bagian, Fungsi, Cara Menggunakan & Menghitung | Fisika Kelas 10 (ruangguru.com).

Erick, Y. (2021). Pengertian Mesin Gerinda: Fungsi, Jenis, Kegunaan, Cara Menggunakan. Diunduh pada tanggal 23 Mei 2023, dari Pengertian Mesin Gerinda: Fungsi, Jenis, Kegunaan, Cara Menggunakan (stellamariscollege.org).

Sodikin, J. Waluyo, and Y. Pratiwi, “Rancang bangun tungku pemanas untuk pande besi yang ramah lingkungan guna meningkatkan kapasitas produksi alat pertanian,” Simposium Nasional ke 15 RAPI, pp. 458–463,2016.

Saifuddin, S., Arskadius, M.A., & Lukman. (2016). Aplikasi dapur pemanas bagi pengrajin pandai besi untuk meningkatkan kualitas produk alat-alat perkakas Pertanian. Jurnal Polimesin, 14(2), 19 22.https://dx.doi.org/10.30811/jpl.v14i2.338

Sukandarrumidi. 1995. Batubara dan Gambut. Gajah Mada University Press.

Jogjakarta.

Sularso & Kiyokatsu Suga, 2012, Journal Rancang Bangun Tungku Peleburan Alumunium

Sistem Aliran Udara Paksa. Pradnya Pratama. Jakarta, 2003.

Trombo dan Le Phat Vinh 1973., Mesin vektor dukungan berdasarkan desain kontrol fungsional prediktif untuk suhu keluaran tungku kokas, J. Process Control 18 (5) 439-448.

Downloads

Published

2024-01-19

How to Cite

Putra, A., Mukhnizar, M., Selviyanty, V. ., Abu, R. ., & Afdal, A. (2024). Pembuatan Tungku Pembakaran Logam. Jurnal Teknik Industri Terintegrasi (JUTIN), 7(1), 483–487. https://doi.org/10.31004/jutin.v7i1.25496

Issue

Section

Articles of Research

Most read articles by the same author(s)

1 2 > >>