Pelleting dies – design, material, geometry of pressing channels
Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava. Namestie slobody 17, 81231 Bratislava, Slovakia.
Review
World Journal of Advanced Engineering Technology and Sciences, 2022, 07(02), 287-295.
Article DOI: 10.30574/wjaets.2022.7.2.0181
Publication history:
Received on 25 November 2022; revised on 28 December 2022; accepted on 31 December 2022
Abstract:
The paper deals with the specific field of the design of pelleting tools with a focus on pelleting dies. It focuses in great detail on the different geometries of the press channels and their significance. It also approaches the field of material engineering in the design of these tools. The published information is based on many years of experience, knowledge, and professional data about pelleting tools acquired by the authors during many years of design practice in the field of research and development of pelleting machines and tools. The information provided is intended to explain this specific field and to assist designers in the design of pressing tools.
Keywords:
Pelleting die; Flat die; Ring die; Pelleting tools; Densification; Pressing channels
Full text article in PDF:
Copyright information:
Copyright © 2022 Author(s) retain the copyright of this article. This article is published under the terms of the Creative Commons Attribution Liscense 4.0