RESEARCH AND DESIGN OF GRID-CONNECTED INVERTER IN PHOTOVOLTAIC SYSTEM WITH SVPWM TECHNIQUE
DOI:
https://doi.org/10.29121/ijetmr.v6.i11.2019.460Keywords:
SVPWM, Reactive Power Control, Solar Energy, PLLAbstract
This paper presents the design and simulation of three phase grid-connected inverter for photovoltaic systems with power ratings up to 5 kW. In this research, the application of Space Vector Pulse Width Modulation (SVPWM) technique for inverter is explored. With the use of SVPWM inverter, synchronization between the inverter and electrical grid follows the Phaselocked Loop (PLL) algorithm. The proposed design is simulated and validated by experimental results.
Downloads
References
Tang Binwei; Yuan Tiejiang (2012); Simulation Models for Photovoltaic and Grid-Connected Simulation Based on PSCAD 2012(21)
Zamre Abd Ghani, M. A. Hannan, Azah Mohamed, Subiyanto Subiyanto (2011); Three-Phase Photovoltaic Grid-Connected Inverter using dSPACE DS1104 Platform. IEEE PEDS, 2011,12. 447-451.
Marian P. Kazmierkowski; R. Krishnan (2012); Frede Blaabjerg; “Control in Power Electronics”, Elsevier Science.
Trần Quang Thọ (2017); Điều khiển bộ nghịch lưu nối lưới trong mạng điện phân phối. Đại học Sư phạm Kỹ thuật Tp. Hồ Chí Minh, 2017.
M. P. Kazmierkowski and L. Malesani (1998); Current control techniques for three-phase voltagesource pwm converters: a survey. Industrial Electronics, IEEE Transactions on, vol. 45, No. 5, pp. 691–703, 1998.
Quang, N.P and Dittrich, J. (2012), "Vector control of three phase AC machine– System Development in the Practice”, Springer, Berlin – Heidelberg 2008
S. Thiruppathi, Mrs.S.Devi (2014); A Novel Voltage Control Strategy for Three Phase Grid Connected System with Distributed Generation Inverters. International Journal of Innovative Research in Science, Engineering and Technology, 2014, 2(3)
Marian P. Kazmierkowski; R. Krishnan (2012); Frede Blaabjerg; “Control in Power Electronics”, Elsevier Science.
Downloads
Published
How to Cite
Issue
Section
License
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere.
- That its release has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Copyright
Authors who publish with International Journal of Engineering Technologies and Management Research agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
For More info, please visit CopyRight Section