In this report, following the preceding paper, the large plastic deformations of the corrugated bulkhead are discussed under transverse impact at center such as considered inelastic impact when all edges of the bulkhead are supported.
From the view-point of perfect-plastic analysis, we are especially concerned about both maximum deflections and maximum impulsive loads by applying the simplified treatment, in the case of plate material having ideal characteristics of plastic bending moment M_p (θ) such as expressed by M_p0γ₁ (1 +γ₂θ) and keeping the ratio of two plastic moments due to bending or twisting, independent of angular velocity θ. In theoretical analysis, the shape of impulsive load is assumed rectanguler between impact duration 2T.
Experiment was carried out using several specimens, and its results were compared with the theoretical results for the large permanent deformations, then the close agreements were obtained.