Cu II Removal from Industrial Wastewater Using Low Cost Adsorbent
Main Article Content
Abstract
Study the possibility of utilization of waste tires rubber ash (WTRA) as a low-cost
adsorbent and are available as a type of solid waste for the removal of copper ions from
industrial wastewater. Depending on batch adsorption experiments, the effect of different
parameters including pH, adsorbent dosage WTRA, contact time, initial concentration of the ion
and shacking speed were studied. Results showed that the highest removal Cu+2 ions was
97.8% at pH equal to 6, 120 min contact time, dose WTRA 1.5 g/L, shacking speed 150 rpm.
The experimental data were analyzed using the Freundlich and Langmuir isotherm models
showed great compatibility with Langmuir model (R2=0.923). Adsorption kinetics was studied
and the data was showed agree with Pseudo-first-order equation where the value of
(kt=0.5115/min). The study also showed the possibility of using WTRA efficiently as adsorbent
and low cost in the removal of copper ions from industrial waste water.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
References
-Anthony NK and Alison EL. A mathematical
model of a high sulphate wastewater an
aerobic treatment system. Water Research.
(1); 2002: 257.
- Mohan D and Pittman CU. Activated
carbons and low cost adsorbents for
remediation of triand hexavalent chromium
from water. Journal of Hazardous Material.
(2); 2006: 762.
- Mehmet EA, Sukru D, Celalettin O and
Mustafa K. Heavy metal adsorption by
modified oak sawdust. Journal of Hazard
Material In Press; 2006.
- Nocito FF, Lancilli C, Giacomini B and
Sacchi GA. Sulfur metabolism and
cadmium stress in higher plants, plant
stress. Global Science Books. 1(2); 2007:
-156.
- Mousavi HZ, Hosseinifar A and Jahed V.
Removal of Cu II from wastewater by waste
tire rubber ash. Journal of the Serbian
Chemical Society. 75(6); 2010): 845–853. DOI: https://doi.org/10.2298/JSC090410044M
- Islamoglu S, Yilmaz L, Ozbelge HO.
Development of a precipitation based
separation scheme for selective removal
and recovery of heavy metals from
cadmium rich electroplating industry
effluents. Sep Science Technology. 41(15);
:3367–3385.
- Xiarchos I, Jaworska A and Zakrzewska-
Trznadel G. Response surface
methodology for the modelling of copper
removal from aqueous solutions using
micellar-enhanced ultrafiltration. Journal
Membrane Science. 321; 2008: 222–231. DOI: https://doi.org/10.1016/j.memsci.2008.04.065
- Gupta VK and Ali I. Removal of
endosulfan and methoxychlor from water
on carbon slurry. Environmental Science
Technology. 42; 2008: 766–770. DOI: https://doi.org/10.1021/es7025032
- Hamdaoui O. Removal of copper (II) from
aqueous phase by purolite C100-MB cation
exchange resin in fixed bed columns:
modeling. Journal Hazardous Material.
(2–3); 2009: 737–746.
- Cordero B, Lodeiro P, Herrero R and
Sastre de Vicente ME. Biosorption of
cadmium by fucus spiralis. Environmental
Chemical. 1; 2004: 180–187.
- Ciobanu G, Ilisei S, Harja M and Luca C.
Removal of reactive blue 204Dye from
aqueous solutions by adsorption on to
nanohydroxyapatite. Science Advance
Material. 5(8); 2013:1090–1096.
- Buema G, Cimpeanu SM, Sutiman DM,
Rusu L, Cretescu I, Ciocınta RC and Harja
M. Removal from aqueous solution by
bottom ash. Journal Food Agriculturer
Environmental. 11(1); 2013:1137–1141. DOI: https://doi.org/10.7256/2070-8955.2014.11.13437
- Cretescu I, Soreanu G and Harja M. A
low-cost sorbent for removal of copper Ions
from wastewaters based on sawdust/Fly
ash mixture. International Journal
Environmental Science Technology. 12;
:1799–1810.
- Banadda N, Nhapi I, Murenzi R, Sekomo,
C B and Wali UG. Removal of heavy metals
from industrial wastewater using rice husks.
The Open Environmental Engineering
Journal. 4; 2011: 170-180.
- Bernard E, Jimoh A and Odigure JO “
Heavy metals removal from industrial
wastewater by activated carbon prepared
from coconut shell. Research Journal of
Chemical Sciences. 3(8); 2013:3-9.
- Mousavi H Z, Hosseynifar A, Jahed V
and Dehghani SAM. Removal of lead from
aqueous solution using waste tire rubber
ash as an adsorbent. Brazilian Journal of
Chemical Engineering. 27(1); 2010: 79–87. DOI: https://doi.org/10.1590/S0104-66322010000100007
- Weng YC and Chang NB. Treatment of
metal and industrial waste water by fly ash
and cementfixation. Resoures Conservation
Recycling.33(181); 2001. DOI: https://doi.org/10.1016/S0921-3449(01)00084-2
- Abdula AI and Ahmed SH. Effect of
rubber treated by acidic solution on some
mechanical properties of rubberized
cement mortar. Engineering and
Technology Journal. University of
Technology. Iraq. 29(3); 2013: 2793-2806.
- Chang NB. Economic and policy
instrument analyses in support of the scrap
tire recycling program in Taiwan. Journal
Environmental Management. 86(3); 2008:
- Gopalakrishnan S, Kannadasan T,
Velmurugan S, Muthu S and Vinoth Kumar
P. Biosoraption of chromum (VI) from
industrial effluent using neem leaf
adsorbent. Res. J. Chem. Sci. 3(4):49.
- Horsfall MJ, Abia AA and Spiff AI. Kinetic
studies on the adsorption of Cd2+, Cu2+ and
Zn2+ ions from aqueous solutions by
gassava (manihot esculenta) tuber bark
waste. J. of Biores Technol. 97; 2006: 283- DOI: https://doi.org/10.1111/j.1349-7006.2006.00179.x
- Perry SJ and Chilton VL. Evaluating GAC
adsorption capacity. Journal AWWA,73;
: 406-413.
- Lagergren S. About the theory of Socalled
adsorption of soluble substances.
Kung Seventeen Hand. 24; 1989:1–39. DOI: https://doi.org/10.7748/paed.1.6.24.s26
- Elliott HA and Denneny CM. Soil
adsorption of cadmium from solutions
containing organic ligands. Journal
Environmental Quality.11; 1982: 658. DOI: https://doi.org/10.2134/jeq1982.114658x
- Ho YS and McKay G. Pseudo-second
order model for sorption processes.
Process Biochem. 34; 1999: 451–65. DOI: https://doi.org/10.1016/S0032-9592(98)00112-5