Evaluation of Paper Insulation Condition of Distribution Transformers Based on the Concentration of 2-FAL and Methanol

نوع مقاله : علمی-پژوهشی

نویسندگان

1 Department of Electrical Engineering, Azarbaijan Shahid Madani University, Tabriz, Iran

2 Polymer Research Laboratory, Faculty of Chemistry, University of Tabriz, Tabriz, Iran

چکیده

Monitoring and evaluation of transformers are essential to prevent their insulation failure. In this paper, the use of 2-furan-carboxaldehyde (2-FAL) and methanol (MeOH) concentrations as the main products of paper insulation degradation, and insulation condition markers, has been studied. In order to study the degradation process and production of degradation products, the thermal aging process of the transformer insulation system was implemented in laboratory conditions. The results of laboratory studies show that in the early stages of degradation the amount of MeOH is significant compared to 2-FAL. Also, the estimation of the degree of polymerization (DP) in the early stages of degradation (DP>800) through MeOH concentration and with decreasing DP (DP <800) through 2-FAL concentration is closer to the real value. The results of studies performed on 35 distribution transformers confirm the production of significant amounts of MeOH in the early stages of degradation. Also, the estimated DP values for the studied transformers were obtained through 2-FAL and MeOH concentration. The results show that estimating the amount of DP through MeOH concentration is associated with a probability of error of about 9% compared to estimating DP through 2-FAL concentration.

کلیدواژه‌ها


عنوان مقاله [English]

Evaluation of Paper Insulation Condition of Distribution Transformers Based on the Concentration of 2-FAL and Methanol

نویسندگان [English]

  • R. Emadifar 1
  • N. Taghizadegan Kalantari 1
  • V. Behjat 1
  • R. Najjar 2
1 Department of Electrical Engineering, Azarbaijan Shahid Madani University, Tabriz, Iran
2 Polymer Research Laboratory, Faculty of Chemistry, University of Tabriz, Tabriz, Iran
چکیده [English]

Monitoring and evaluation of transformers are essential to prevent their insulation failure. In this paper, the use of 2-furan-carboxaldehyde (2-FAL) and methanol (MeOH) concentrations as the main products of paper insulation degradation, and insulation condition markers, has been studied. In order to study the degradation process and production of degradation products, the thermal aging process of the transformer insulation system was implemented in laboratory conditions. The results of laboratory studies show that in the early stages of degradation the amount of MeOH is significant compared to 2-FAL. Also, the estimation of the degree of polymerization (DP) in the early stages of degradation (DP>800) through MeOH concentration and with decreasing DP (DP <800) through 2-FAL concentration is closer to the real value. The results of studies performed on 35 distribution transformers confirm the production of significant amounts of MeOH in the early stages of degradation. Also, the estimated DP values for the studied transformers were obtained through 2-FAL and MeOH concentration. The results show that estimating the amount of DP through MeOH concentration is associated with a probability of error of about 9% compared to estimating DP through 2-FAL concentration.

کلیدواژه‌ها [English]

  • Condition Assessment
  • Distribution transformer
  • Furans
  • Methanol
[1] S. S. Ghoneim, “The Degree of Polymerization in a Prediction Model of Insulating Paper and the Remaining Life of Power Transformers.” Energies, Vol. 14, no. 3, pp. 1-14, 2021.
[2] V. Behjat, R. Emadifar, M. Pourhossein, U. Mohan Rao, I. Fofana, and R. Najjar. “Improved Monitoring and Diagnosis of Transformer Solid Insulation Using Pertinent Chemical Indicators.” Energies, Vol. 14, no. 13, pp. 1-13, 2021.
[3]  R. Emadifar, N. Taghizadegan Kalantari, V. Behjat, and R. Najjar, “A new method for using the UV-visible spectrum of oil for evaluating the paper insulation quality of used transformers”. Iranian Electric Industry Journal of Quality and Productivity, Vol. 11, no. 1. pp. 1-9, 2022.
[4] T. K. Saha, “Review of modern diagnostic techniques for assessing insulation condition in aged transformers.” IEEE transactions on dielectrics and electrical insulation, Vol. 10, no. 5, pp. 903-917, 2003.
[5] R. R. Meena, S. Chaki, A. J. Khimani, and M. P. Deshpande, “Transformer oil degradation study by chromatography, spectroscopy and dissolved gas analysis.” Petroleum and Coal, Vol. 60, no. 5, pp. 872-878, 2018. ‏‏
[6] O. H. Arroyo, I. Fofana, J. Jalbert, and M. Ryadi, “Relationships between methanol marker and mechanical performance of electrical insulation papers for power transformers under accelerated thermal aging,” IEEE Transactions on Dielectrics and Electrical Insulation, vol.22, no.6, pp. 3625-3632, 2015.
]7[ امید قادری، محمدرضا فیضی، «روش جدید برای تخمین عمر باقیمانده ترانسفورماتورهای قدرت با استفاده از آنالیز گازهای محلول در روغن»، مجله مهندسی برق دانشگاه تبریز، جلد 39، شماره 1، صفحه 57-66، 1388.
[8] محمدرضا آرین نیک، علی اصغر رضی کاظمی، «تخمین طول عمر ترانسفورماتورهای روغنی بر مبنای درجه پلیمریزاسیون»، مجله مهندسی برق دانشگاه تبریز، جلد 49، شماره 3، صفحه 995-106، 1398.
[9] S. Tang, G. Peng, and Z. Zhong, “Quantitative spectral analysis of dissolved gas in transformer oil based on the method of optimal directions,”  In 2016 35th Chinese Control Conference (CCC) Jul 27, 2016, pp. 4425-4429.
[10] J. N’cho, I. Fofana, Y. Hadjadj, and A. Beroual, “Review of physicochemical-based diagnostic techniques for assessing insulation condition in aged transformers”. Energies, Vol. 9, no. 5, pp. 367-377, 2016.
[11] T. Leibfried, M. Jaya, N. Majer, M. Schafer, M. Stach, and S. Voss, “Postmortem investigation of power transformers—Profile of degree of polymerization and correlation with furan concentration in the oil.” IEEE Transactions on Power Delivery, Vol. 28, no. 2, pp. 886-893. 2013.
[12] L. Cheim, D. Platts, T. Prevost, and S. Xu. “Furan analysis for liquid power transformers.” IEEE Electrical Insulation Magazine, Vol. 28, no. 2, pp. 8-21, 2012.
[13] F. Ortiz, C. Fernández, A. Santisteban, F. Delgado, and A. Ortiz. “Estimating the age of power transformers using the concentration of furans in dielectric oil.” Renewable Energy and Power Quality Journal, Vol. 1, no. 14, pp. 1011-1015, 2016.
[14] C. Chen, S. Li. “An improved method of detection and concentration of methanol in oil-paper insulation.” IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 27, no. 5, pp. 1724-1727, 2020.
[15] J. Jalbert, R. Gilbert, P. Tétreault, B. Morin, and D. Lessard-Déziel, “Identification of a chemical indicator of the rupture of 1,4-B-glycosidic bonds of cellulose in an oil-impregnated insulating paper system,” Cellulose, Vol. 14, no. 4, pp. 295–309, 2007.
[16] L. Peng, Q. Fu, L. Li, and M. Lin, “Indirect detection of DP for insulating paper based on methanol content in transformer oil by spectroscopic approach,” IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 26, no. 1, pp. 90–94, 2019.
[17] A. Schaut, S. Autru, and S. Eeckhoudt, “Applicability of methanol as new marker for paper degradation in power transformers,” IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 18, no. 2, pp. 533–540, 2011.
[18] J. Jalbert, R.Gilbert, Y. Denos, and P. Gervais, “Methanol: a novel approach to power transformer asset management,” IEEE Transactions on Power Delivery, Vol. 27, no. 2, pp. 514–520, 2012.
[19] J. Jalbert, C. Rajotte, M. C. Lessard, and M. Rodriguez-Celis. “Methanol in oil interpretation model based on transformer post-mortem paper analysis.” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 25, no. 2, pp. 568-573, 2018.
[20] هدی مولوی، عباس یوسف پور، نعیم حسنی، اکبر میرمصطفی، سپیده حامدی، « ارزﻳﺎﺑﻲ وﺿﻌﻴﺖ ﻛﺎﻏﺬ ﻋﺎﻳﻘﻲ ﺗﺮاﻧﺴﻔﻮرﻣﺎﺗﻮرﻫﺎی ﭘﺎﻳﻠﻮت از ﻃﺮﻳﻖ ﻧﺸﺎﻧﮕﺮ ﺷﻴﻤﻴﺎﻳﻲ ﻣﺘﺎﻧﻮل »، سی و دومین کنفرانس بین المللی برق(PSC2017)، آبان 96، تهران، ایران، ص 1-5.
[21] O. H. Arroyo, I. Fofana, J. Jalbert, and M. Ryadi, “Relationships between methanol marker and mechanical performance of electrical insulation papers for power transformers under accelerated thermal aging.” IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 22, no. 6, pp. 3625-3632, 2015.
[22]T. Amimoto, E. Nagao, J. Tanimura, S. Toyama, Y. Fujita, H. Kawarai, and N. Yamada. “Identification of affecting factors of copper sulfide deposition on insulating paper in oil.” IEEE Transactions on Dielectrics and Electrical Insulation, Vol.16, no. 1, pp. 265-272, 2009.
[23] I. Lingvay, O .Gabriela, L. C. Ungureanu, A. Pica, and V. Stănoi. “Thermal ageing of some insulating fluids in contact with insulation paper and copper.” Rev. Chim.(Bucharest), Vol.68, no.12, pp. 2881-2885, 2017.
[24] E. Zhang, H. Zheng, C. Zhang, J. Wang, K. Shi, J. Guo, H.Schwarz and C. Zhang. “Aging state assessment of transformer cellulosic paper insulation using multivariate chemical indicators.” Cellulose, Vol. 28, no. 4, pp.2445-2460, 2021.
[25] Measurement of the Average Viscometric Degree of Polymerization of New and Aged Cellulosic Electrically Insulating Materials, IEC 60450, 2004. https://webstore.iec.ch/publication/2162.
[26] H. Molavi, A. Yousefpour, A. Mirmostafa, A. Sabzi, S. Hamedi, M. Narimani, and N. Abdi. “Static headspace GC/MS method for determination of methanol and ethanol contents, as the degradation markers of solid insulation systems of power transformers.” Chromatographia, Vol. 80, no. 7 , pp. 1129-1135, 2017.
[27] M. C. Bruzzoniti, R. Maina, R. M. De Carlo, C. Sarzanini, and V. Tumiatti. “GC methods for the determination of methanol and ethanol in insulating mineral oils as markers of cellulose degradation in power transformers.” Chromatographia, Vol.77, no. 15-16, pp. 1081-1089, 2014.