Analiza wpływu obciążenia termomechanicznego na wytrzymałość połączenia z nitem zrywalnym
Analysis of the thermomechanical load impact on the riveted joint strength
Mechanik nr 02/2017 - Inżynieria materiałowa
STRESZCZENIE: Przedstawiono wyniki analizy eksperymentalnej wytrzymałości pojedynczego złącza w próbie ścinania w temperaturze 23, 400, 600 i 800°C. Pozwolą one wyjaśnić, jak temperatura obciążenia złącza wpływa na jego charakterystykę wytrzymałościową. W badaniach wykorzystano stalową blachę S350GD z powłoką cynkową.
SŁOWA KLUCZOWE: wytrzymałość połączeń nitowych, obciążenie termomechaniczne, S350GD+Z275
ABSTRACT: Presented was the results of experimental analysis of single riveted joints strength. The joints shear strength was determined in temperature of 23, 400, 600, 800 Celsius degrees. The obtained results helped to explain how the temperature affects on the joint load characteristic. The experimental research was carried out for zinc coated S350GD sheet metal material.
KEYWORDS: riveted joint strength, thermomechanical load, S350GD+Z275
BIBLIOGRAFIA / BIBLIOGRAPHY:
- Dano M.L., Gendron G., Picard A. “Stress and failure analysis of mechanically fastened joints in composite laminates”. Compos. Struct. 50 (2000): s. 287–296.
- EN 1993-1-8, Eurocode 3. Design of steel structures. Part 1–8: Design of joints; 2005.
- Mucha J., Witkowski W. “The experimental analysis of the double joint type change effect on the joint destruction process in uniaxial shearing test”. Thin Wall. Struct. 66 (2013): s. 39–49.
- Bayan A., Sariffuddin S., Hanim O. “Cold formed steel joints and structures – a review”. Int. J. Civil Struct. Eng. 2, 2 (2011): s. 621–634.
- Lu W., Mäkeläinen P., Outinen J., Ma Z. “Design of screwed steel sheeting connection a tambient and elevated temperatures”. Thin Wall. Struct. 49 (2011): s. 1526–1533.
- Childs P. “Fastening and Power Screws”. Mechanical Design Engineering Handbook. Elsevier Ltd., 2014, s. 677–719.
- Matsuzaki R., Shibata M., Todoroki A. “Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method”. Compos. Part A-Appl S. 39 (2008): s. 154–163.
- Kolesnikov B., Herbeck L., Fink A. “CFRP/titanium hybrid material for improving composite bolted joints”. Compos. Struct. 83 (2008): s. 368–380.
- Moroni F., Pirondi A., Kleiner F. “Experimental analysis and comparison of the strength of simple and hybrid structural joints”. Int. J. Adhes. Adhes. 30 (2010): s. 367–379.
- Di Franco G., Fratini L., Pasta A. “Influence of the distance between rivets in self-piercing riveting bonded joints made of carbon fiber panels and AA2024 blanks”. Mater. Des. 35 (2012): s. 342–349.
- Di Franco G., Fratini L., Pasta A. “Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks”. Int. J. Adhes. Adhes. 41 (2013): s. 24–32.
- Masahito Ueda M., Miyake S., Hasegawa H., Hirano Y. “Instantaneous mechanical fastening of quasi-isotropic CFRP laminates by a self-piercing rivet”. Compos. Struct. 94 (2012): s. 3388–3393.
- Di Lorenzo G., Landolfo R. “Shear experimental response of new connecting systems for cold-formed structures”. Journal of Constructional Steel Research. 60, 3–5 (2004): s. 561–579.
- Mucha J., Witkowski W. Nit rurkowy do nitowania, zwłaszcza tarciowego. Zgłoszenie Patentowe UP RP: P.404729 (16.07.2013).
- Min J., Li Y., Carlson B.E., Hu S.J., Li J., Lin J. “A new single-sided blind riveting method for joining dissimilar materials”. CIRP Annals – Manufacturing Technology. 64, 1 (2015): s. 13–16.
- Kelly B., Costello C. “FEA modelling of setting and mechanical testing of aluminum blind rivets”. J. Mater. Process. Technol. 153–154 (2004): s. 74–79.