USE OF DRILLING MUDS

Authors

  • Yulia Mikhailovna Galitskova Samara state technical University, Architecture and construction Academy (RU)

DOI:

https://doi.org/10.17770/etr2019vol1.4101

Keywords:

drilling mud, laboratory tests, land reclamation, waste disposal

Abstract

Drilling of wells is accompanied by pollution of all environmental components with drilling and process waste. With drilling operations carried out, terrain and soil mass disturbance occur first. Waste generated during the drilling process includes drilling muds, return drilling muds, drilling wastewater. The contaminating ability of drilling waste is determined by the use of chemical reagents and components involved in the preparation and processing of drilling muds. The use of additives and reagents is necessary to make sure the solution displays certain properties that ensure effective well drilling. The resulting waste is usually disposed of at landfills or is buried at the site of formation in mud pits, ensuring minimal environmental impact. The use of drill muds in other spheres is hindered by the complex composition of oily waste.

The composition of liquid and solid fractions of drilling muds from several deposits were studied in laboratory setting. Waste samples were analyzed for moisture content, organic substances, oil products and other substances. According to the results of the research, measures for improving the properties of drilling muds were developed and proposed. For this purpose, an introduction of high sorption substances to the waste is proposed.

The most effective should be the use of a sorbent capable of retaining organic matters and heavy metals. The resulting homogeneous soil-like mixture can be used for land reclamation in the city areas and other settlements, when performing planning works at the initial and final stages of construction, as well as at landscaping residential areas.


 

Downloads

Download data is not yet available.

References

J. Järnegren, S. Brooke, H. Jensen, "Macrofaunal communities associated with chemosynthetic habitats from the U.S. Atlantic margin: A comparison among depth and habitat types," in Deep-Sea Research Part II: Topical Studies in Oceanography vol. 137, 2017, pp. 42-55.

A.I. Murzayeva, Y.M. Galitskova, "Urban soil contamination Procedia Engineering, " vol. 153, 2016, pp.162-166.

R.A. Savinov, A.V. Кalashnikov, D.A. Кonuhov, A.V. Petrov, "Analysis and modernization of well drilling waste utilization methods," in Environmental protection in oil and gas complex vol. 8, 2011.

A.A. Annenkov, V.A. Grabovnikov, N.N. Egorov, "Drilling waste management methods in the process of exploration and development of oil and gas fields," in Exploration and protection of mineral resources vol. 10, 2013, pp.4.

I.A. Bobrenko, E.U. Pavlova, "The problem of improving environmental safety in treatment of drilling wastes on the territory of Western Siberia, " Omsk scientific Bulletin vol. 1, 2015,pp. 198-202.

N.V. Stolbova, A.A. Matsuk, E.A. Shafeeva, "Actual problems of drilling waste disposal," in Science and technology in gas industry vol. 1, 2011, pp.96-99.

V. A. Gureva, V.V. Dubinetsky, K.M. Vdovin, "Environmental and economic effects of sludge in the production of ceramic bricks," in International research journal, vol. 11, 2016, pp.50-53. DOI: https://doi.org/10.18454/IRJ.2016.53.002

E. A. Pichugin, "Technology Solution for Waste Recovery of Gel Breakdown in Aqueous Bases after Hydraulic Fracturing," in Ecology and industry of Russia vol. 7, 2017, pp.30-35.

N.L. Zotsenko, E.A. Timofeeva, "A sludge pit for drilling wastes of oil and gas wells with soilcement watertight screens," in Bulletin of Perm national research Polytechnic University. Construction and architecture vol. 1, 2015, pp.7-20. https://doi.org/10.15593/2224-9826/2015.1.01

E. A. Pichugin, "Drilling mud as a component of reclamation materials," in Ecology and industry of Russia, vol. 4, 2018, pp. 16-19.

A. E. Rakhmetova, E. I. Kutuzova, "Production waste during drilling and drill cuttings," in Young scientist, vol. 3, 2018, pp. 59-61.

V.S. Petukhova, L.N. Skipin, D.L. Skipin, "Comparative assessment of alternatives for biological restoration of drill cuttings," in Agrarian Bulletin of the Urals, vol.1, 2017, pp. 8.

M.V. Zilberman, E.A. Pichugin, M.V. Cherepanov, B.E. Shenfeld, G.A.Kozlova, "Brill cuttings properties and possible directions of their disposal," in Bashkir environmental Bulletin, vol.2, 2013, pp.10-14.

M. M. Malyshkin, "Greening the technology of drilling wells, " in Proceedings of the Mining Institute, vol.203, 2013, pp. 63-66.

N. V. Stolbova, A. A. Matsuk, E. A. Shafeev, "Actual problems of drilling waste disposal," in Science and technology in the gas industry, vol.1, 2011, pp. 96-99.

M. R. Meretukova, "Confirmation of suitability for use in construction of drill cuttings according to studies," in Drilling and oil, vol.12, 2016, pp. 36-37.

D. V. Oreshkin, G. P. Sakharov, A. N. Chebotaev, A. S. "Kurbatova, Geo-ecological problems of drilling waste disposal in the yamal peninsula," in Vestnik MGSU, vol. 2, 2012, pp. 125-129.

L. N. Skipin, Skipin D. L., V. S. Petukhov, I. N. Kustysheva, "The effects of coagulant on the physical properties of drill cuttings," in Bulletin of Kemerovo state University, vol. 4, 2015, pp. 88-92.

E. A. Timofeev, N. D. Kuramshina, "The drilling waste slurry in the barn," in Youth and science, vol. 2, 2018, pp. 118.

T. N. Zhukov, I. S. Glushankova, E. S. Belik, "DeVelopment of technology for disposal waste drilling fluids, drilling sludges and oil-contaminated soils using biological products," in Transport. Transport construction. Ecology, Vol. 2, 2015, pp. 31-45.

Downloads

Published

2019-06-20

How to Cite

[1]
Y. M. Galitskova, “USE OF DRILLING MUDS”, ETR, vol. 1, pp. 59–61, Jun. 2019, doi: 10.17770/etr2019vol1.4101.