IEICE Transactions on Electronics
Online ISSN : 1745-1353
Print ISSN : 0916-8524
Special Section on Microwave and Millimeter-Wave Technology
A Fully Canonical Bandpass Filter Design Using Microstrip Transversal Resonator Array Configuration
Masataka OHIRAToshiki KATOZhewang MA
Author information
JOURNAL RESTRICTED ACCESS

2016 Volume E99.C Issue 10 Pages 1122-1129

Details
Abstract

This paper proposes a new and simple microstrip bandpass filter structure for the design of a fully canonical transversal array filter. The filter is constructed by the parallel arrangement of microstrip even- and odd-mode half-wavelength resonators. In this filter, transmission zeros (TZs) are not produced by cross couplings used in conventional filter designs, but by an intrinsic negative coupling of the odd-mode resonators having open ends with respect to the even-mode resonators with shorted ends. Thus, the control of the resonant frequency and the external Q factor of each resonator makes it possible to form both a specified passband and TZs. As an example, a fully canonical bandpass filter with 2-GHz center frequency, 6% bandwidth, and four TZs is synthesized with a coupling-matrix optimization, and its structural parameters are designed. The designed filter achieves a rapid roll-off and low-loss passband response, which can be confirmed numerically and experimentally.

Content from these authors
© 2016 The Institute of Electronics, Information and Communication Engineers
Previous article Next article
feedback
Top