Retraction notice to “Electrical conduction of polyimide films prepared from polyamic acid (PAA) and pre-imidized polyimide (PI) solution”

T.Y. Kim; W.J. Kim; T.H. Lee; J.E. Kim; H.G. Yoon; K.S. Suh

doi:10.1515/epoly.2012.12.1.611

Publicly Available Published by De Gruyter August 31, 2013

Retraction notice to “Electrical conduction of polyimide films prepared from polyamic acid (PAA) and pre-imidized polyimide (PI) solution”

T.Y. Kim , W.J. Kim , T.H. Lee , J.E. Kim , H.G. Yoon and K.S. Suh

From the journal e-Polymers

https://doi.org/10.1515/epoly.2012.12.1.611

Published Online: 2013-8-31

Published in Print: 2012-12-1

From the journal

e-Polymers

Volume 12 Issue 1

Submit manuscript

Journal and Issue

Articles in the same Issue

Toughening of glass fiber reinforced Nylon 66 with EPDMMAH: Dynamic mechanical, rheological, and morphological investigations

Preparation and characterization of exfoliated nanocomposite prepared by vinyl acetate, montmorillonite and dioctadecyl dimethyl ammonium bromide

Effects of organoclay on morphology and mechanical properties in acrylonitrile-butadiene-styrene/polyamide 6/ organoclay ternary nanocomposites

Synthesis and characterization of poly(St-co-DVB)/montmorillonite nanocomposites by suspension polymerization

Dual phase continuity and phase inversion phenomena in natural rubber/ethylene vinyl acetate (EVA) copolymer blends

Mechanical characterization of rigid π-conjugated polymer on a nanometer scale through nanoindentation

Powder X-ray diffraction and thermal decomposition correlation studies of nano-crystalline styrene-maleic anhydride graft copolymer-ZnO composites

Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part I: Effects of concentration on morphology, liquid crystallinity and thermal properties

Influence of hydrophobe fraction content on the rheological properties of hydrosoluble associative polymers obtained by micellar polymerization

Interaction of carbon monoxide with PEDOT-PSS/zeolite composite: effect of Si/Al ratio of ZSM-5 zeolite

Synthesis and characterization of amphiphilic graft copolymers with hydrophobic poly(α-methylstyrene) backbone and hydrophilic poly(n-vinylpyrrolidone) side chains

Effect of clay modification on the dynamic mechanical and dielectric properties of PMMA nanocomposites via melt blending

Microwave-assisted Wurtz coupling of methylphenyldichlorosilane in solvent-free conditions

On the structure alteration of crosslinkable gelatin coupled with methacrylic acid and its hydrogel

Rheological properties of pectin, poly(vinyl alcohol) and their blends in aqueous solutions

Intercalation of montmorillonite based on dendritic quaternary ammonium: preparation and characterization

Percipitation copolymerization of acrylamide and acrylic acid: Determination of reactivity ratio by various methods

Effect of FeCl3 on the morphology, wetting behavior, and stabilization/carbonization of polyacrylonitrile nanofibers prepared by electrospinning

Synthesis of star hydrophobically-modified acrylamide copolymers and its some properties in brine

Synthesis of artificial opals with core-shell morphology via emulsion polymerization technique

Fabrication and characterization of poly(triazine dithiol) thin films using a two-step deposition/ photopolymerization process and micropattern

Comparative study on the effects of galbanic acid, galbanic ferric salt and tetrabromo galbanic acid on photo-oxidative degradation of linear low density (LLDPE) films

Precipitated calcium carbonate as carrier particles of ‘dry liquids’ for post-processing crosslinking reactions

Water-soluble copolymers of 2-methacryloyloxyethyl phosphate: Synthesis and properties

A review on modeling of the thermal conductivity of polymeric nanocomposites

Swelling studies and adsorption of safranin T by acrylamide/maleic acid/methylene-bis-acrylamide based hydrogels

Synthesis and thermal properties of new copolyesters based on polycaprolactone

Dissolution of natural polymers in ionic liquids: A review

Enhanced copper-catalyzed “click” reaction between homopolymers with terminal azide and alkyne groups in the presence of water

Optimization approach for processing design in the extrusion process of plastic profile with metal insert

The effect of P-chiral center on helical conformation of optically active N-propargylphosphonamidates

Preparation of poly(methyl methacrylate) nano-latexes via UV irradiation in the presence of iron aqueous solution

Properties and structural characterization of chitosan/poly(vinyl alcohol)/graphene oxide nano composites

Reentrant swelling behavior of poly(4-vinyl phenol) gel in aqueous organic solvent mixtures

Synthesis and characterization of high molecular weight and low dispersity polystyrene homopolymers by RAFT polymerization

Use of a novel pH-triggered polymer-gel system for optimal mobility-control applications

Synthesis, characterization of pyridine-based polyimides and their use as glucose oxidase immobilization media

A comparative study of the reactivity of three plant oil methyl esters with divinylbenzene by FTIR spectroscopy

Poly(imide-amides) oligomers based on germarylene units containing amino acid moieties: synthesis, characterization and thermal analysis

Synthesis of new photobactericidal polymers by “click chemistry” and a study of their biological activity

Contact angle hysteresis on plasma treated polyethylene terephthalate

A study on the kinetic behaviour and thermo-mechanical properties of nanoclay reinforced unsaturated polyester resin prepared under high shear conditions

Morphology, thermal properties and mechanical relaxations of metallocene syndiotactic polypropylenes

UV-Curable organic-inorganic hybrid films based on tetraethylorthosilicate oligomer and special acrylated polyester

Synthesis of polyethylene glycol diacrylate nanogel using irradiation of inverse micelles technique

Synthesis and characterization of polymethylsilsesqui oxane microspheres by the two-step sol-gel method

Observation of oxygen inhibited layer of organic dental resin by confocal Raman-microscopy

Monte Carlo simulation of chromatin fibre confined in a nanochannel

Preparation and properties of molecular-weight-controlled polyimide adhesive film

Tissue engineering scaffold electrospun from poly(ε- caprolactone)-b-poly(sulfobetaine methacrylate) block copolymers with improved hydrophilicity and good cytocompatibility

Synthesis of new copolymers 4,4’-sulfinylbisphenol derivative with N-vinyl-2-pyrrolidone - photopolymerization and thermo-mechanical studies

Retraction notice to “Electrical conduction of polyimide films prepared from polyamic acid (PAA) and pre-imidized polyimide (PI) solution”

Production of microcellular foam based on PP/EPDM: The effects of processing parameters and nanoclay using response surface methodology

ARGET ATRP of copolymerization of styrene and acrylonitrile with environmentally friendly catalyst and ligand

Physical and mechanical properties of rigid polyurethane foams modified with polystyrene beads

Effects of nanoparticles in cells infected by Toxoplasma gondii

Investigation of the surface properties of POSS-modified polyacrylate by inverse gas chromatography

Synthesis and characterization of a novel wound dressing by PVP/ PAANa/chitosan with semi-interpenetrating polymer network structure

Electroactive perovskite lead zirconate particles embedded in an acrylic elastomer

Preparation of new FI-type catalyst for polymerization of ethylene

Synthesis and solution properties of a meta-linked anionic poly(phenylene ethynylene) conjugated polyelectrolyte

Biomedical applications of electrically conductive polymeric systems

Optimization of 4-vinylpyridine nitroxide mediated controlled radical polymerization: Effect of initiator protection and complexation with C60

Polymers containing phtalimidoalkyl groups in the side chains. effect of the alkyl groups in monolayers at the airwater interface

Preparation and characterization of polyhedral oligomeric silsesquioxane/polystyrene nanocomposites

Polymerization of 1,3-butadiene using (salen)Ni(II) and (salphen)Ni(II) complexes in combination with methylaluminoxane

Synthesis and thermal properties of triblock copolymers of methyl methacrylate using combination of anionic and controlled radical polymerization: Poly(methyl methacrylate) center block bearing different microstructures

Characterization of molecular orientation under tensile deformation by near infrared spectroscopy

The variation of comonomers feeding profile to design the distribution of chains composition for the optimization of the mechanical properties in copolymer systems

Oligoetherols and polyurethane foams with carbazole ring

Functional flexible substrate in altering substitution phenylene core of fluorinated poly(arylene ether)s

Condensation between guanidine hydrochloride and diamine/multi-amine and its influence on the structures and antibacterial activity of oligoguanidines

Interfacial synthesis and characterization of L-lysinederived optically active poly(hydrazide-imide)s

Significantly enhanced dielectric response in composite of P(VDF-TrFE) and modified multi-walled carbon-nanotubes

Aqueous AGET ATRP of sodium 2-acrylamido-2-methyl-N-propane sulfonate yielding strong anionic comb polyelectrolytes

On the origin of the electrical response of vapor grown carbon nanofiber + epoxy composites

Study on the thermal degradation of chitosan-Cu/Ni/Mn complexes

Synthesis of long chain aliphatic ester and its titanium complexes for ethylene polymerization

Dynamic lattice liquid (DLL) model in computer simulation of the structure and dynamics of polymer condensed systems

The synthesis and characterization of the polyurethanes with antimicrobial properties

Preparation of a novel superhydrophobic PMMA surface with nanostructure and its blood compatibility

Effects of sterically hindered N-alkoxyamines on photooxidative stability of reinforced polypropylene

Surface characterization of polymer foils

Synthesis and characterization of salt resistance hydrogel microspheres by inverse suspension polymerization

A new high-soluble precursor for in situ silver nanoparticle generation in polymers

The properties, morphology and structure of BPDA/ PPD/ BOA polyimide fibers

Synthesis and characterization of an amphiphilic methoxy poly(l-lactide)-block-poly(glycidylmethacrylate) copolymer as a drug nanocarrier

Synthesis of aromatic polyimide bearing long alkyl chains through click reaction

Synthesis of cross-linked comb-type polysiloxane for polymer electrolyte membranes

Miscibility of chitosan and poly(ethyleneglycol) blends in buffer solution

Thermal behavior of epoxy blends for light emitting diode encapsulation