Abstract
A silica/aminated kaolin (SiO2@AK) composite was prepared by modifying kaolin and loading silica, using intercalation complex method and sol–gel method. Quantitative composites were dispersed in epoxy resin to obtain a silica/aminated kaolin/epoxy resin composite coating (SiO2@AK/EP) on stainless steel. The results showed that the thickness of the dry coating was approximately 110 ± 10 μm, and the surface was flat without evident agglomeration. As the SiO2@AK composite was introduced, the water contact angle increased from 40° to 88°, the average surface roughness of the prepared composite coating was reduced from 10.3 nm to 3.19 nm, and the corrosion current decreased by nearly three orders of magnitude. After the coating was soaked in 3.5 wt% NaCl solution for 30 days, the impedance modulus of the composite coating remained above 2.511 × 109 Ω cm2, reflecting that the introduction of the composite could effectively improve the anticorrosion property of the epoxy resin.
Funding source: Natural Science Foundation of Henan Province
Award Identifier / Grant number: 212300410082
Funding source: Project funding for Young Backbone Teachers in Colleges and Universities of Henan Province
Award Identifier / Grant number: 2020GGJS013
-
Research ethics: This study will comply with research ethics, data collection is for research purposes and will not be used for other purposes, and the collected data will be kept closely and will not be leaked. The survey was conducted with the consent of the participants, who participated in the study voluntarily, and there was no risk to the participants. Participants’ privacy will be protected during and after the study.
-
Author contributions: The authors have accepted responsibility for the entire content of this manuscript and approved its submission. Jiaqi Xie: conceptualization, methodology, writing – original draft. Jiajiao Wei: data curation, writing – review & editing. Renzhe Jin: methodology, writing – review & editing. Mengyuan He: designed research, data curation. Peng Zhu and Jianmeng Wu: formal analysis. Zhengyu Wei and Panfei Sun: investigation. Dehai Ping: supervision. Songjie Li: conceptualization, funding acquisition, writing – review & editing.
-
Competing interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
-
Research funding: This work was partially supported by grants from Natural Science Foundation of Henan Province (212300410082) and Project funding for Young Backbone Teachers in Colleges and Universities of Henan Province (2020GGJS013; Songjie Li). These grants are gratefully acknowledged.
-
Data availability: The raw data can be obtained on request from the corresponding author.
References
Ammar, S., Ramesh, K., Ma, I.A.W., Farah, Z., Vengadaesvaran, B., Ramesh, S., and Arof, A.K. (2017). Studies on SiO2-hybrid polymeric nanocomposite coatings with superior corrosion protection and hydrophobicity. Surf. Coat. Technol. 324: 536–545, https://doi.org/10.1016/j.surfcoat.2017.06.014.Search in Google Scholar
Atta, A.M., El-Saeed, A.M., Al-Lohedan, H.A., and Wahby, M. (2017). Effect of montmorillonite nanogel composite fillers on the protection performance of epoxy coatings on steel pipelines. Molecules 22: 905, https://doi.org/10.3390/molecules22060905.Search in Google Scholar PubMed PubMed Central
Bakhshandeh, E., Jannesari, A., Ranjbar, Z., Sobhani, S., and Saeb, M.R. (2014). Anti-corrosion hybrid coatings based on epoxy–silica nano-composites: toward relationship between the morphology and EIS data. Prog. Org. Coat. 77: 1169–1183, https://doi.org/10.1016/j.porgcoat.2014.04.005.Search in Google Scholar
Behzadnasab, M., Mirabedini, S.M., and Esfandeh, M. (2013). Corrosion protection of steel by epoxy nanocomposite coatings containing various combinations of clay and nanoparticulate zirconia. Corros. Sci. 75: 134–141, https://doi.org/10.1016/j.corsci.2013.05.024.Search in Google Scholar
Bouibed, A. and Doufnoune, R. (2019). Synthesis and characterization of hybrid materials based on graphene oxide and silica nanoparticles and their effect on the corrosion protection properties of epoxy resin coatings. J. Adhes. Sci. Technol. 33: 834–860, https://doi.org/10.1080/01694243.2019.1571660.Search in Google Scholar
Cai, Z., Wang, S.L., Chen, L., Zhao, S.H., Rao, Y.C., Huang, C.M., and Chen, H. (2018). Progress in graphene/epoxy resin composite coatings. Paint Coat. Ind. 48: 83–87.Search in Google Scholar
Chen, Y., Guan, J.F., Hu, H., Gao, H.M., and Zhang, L.Y. (2016). Structural change and interfacial interaction in blended rubber composites filled with silica-kaolin hybrid fillers: a Fourier transform infrared spectroscopic study. Spectrosc. Lett. 49: 118–127, https://doi.org/10.1080/00387010.2015.1104696.Search in Google Scholar
Fan, T.S., Li, C.C., Li, C.P., and Zheng, T.T. (2017). Study on anticorrosive property of acrylic resin modified epoxy anticorrosive coatings. Paint Coat. Ind. 47: 12–17.Search in Google Scholar
Farhadyar, N. and Sadjadi, M.S. (2011). Synthesis and characterization of ZnO-SiO2/epoxy nanocomposite coating by Sol-Gel Process. J. Nano Res. 16: 1–7, https://doi.org/10.4028/www.scientific.net/jnanor.16.1.Search in Google Scholar
Haeri, S.Z., Asghari, M., and Ramezanzadeh, B. (2017a). Enhancement of the mechanical properties of an epoxy composite through inclusion of graphene oxide nanosheets functionalized with silica nanoparticles through one and two steps sol-gel routes. Prog. Org. Coat. 111: 1–12, https://doi.org/10.1016/j.porgcoat.2017.05.003.Search in Google Scholar
Haeri, Z., Ramezanzadeh, B., and Asghari, M.A. (2017b). Novel fabrication of a high performance SiO2 Graphene oxide (GO) nanohybrids: characterization of thermal properties of epoxy nanocomposites filled with SiO2-GO nanohybrids. J. Colloid Interface Sci. 493: 111–122, https://doi.org/10.1016/j.jcis.2017.01.016.Search in Google Scholar PubMed
He, Y., Xu, Z.H., Chen, H.Y., Tang, Y.L., and Chen, D. (2013). The research progress of metal material corrosion protection technology. Appl. Chem. Ind. 42: 2065–2067.Search in Google Scholar
He, Y. and Zhou, B. (2021). The influence of mica iron oxide pigments on epoxy coating properties prepared on AISI 1045 steel rebar immersed in 3.5 wt% NaCl solution. Int. J. Electrochem. Sci. 16: 210726, https://doi.org/10.20964/2021.07.41.Search in Google Scholar
Jiao, C., Sun, L., Shao, Q., Song, J.Y., Hu, Q., Naik, N., and Guo, Z.H. (2021). Advances in waterborne acrylic resins: synthesis principle, modification strategies and their applications. ACS Omega 6: 2443–2449, https://doi.org/10.1021/acsomega.0c05593.Search in Google Scholar PubMed PubMed Central
Li, X., Yang, J.X., Wang, J.J., Chang, X.J., Xu, J.L., and Wu, Z.H. (2021). A stable super-amphiphilic surface created from superhydrophobic silica/epoxy coating by low-temperature plasma-treatment. Surf. Eng. 7: 1282–1289, https://doi.org/10.1080/02670844.2021.1888214.Search in Google Scholar
Liu, J.H., Zhan, Z.W., Li, S.M., and Yu, M. (2012). Corrosion resistance of waterborne epoxy coating pigmented by nano-sized aluminium powder on steel. J. Cent. South Univ. Technol. 19: 46–54, https://doi.org/10.1007/s11771-012-0971-z.Search in Google Scholar
Loganina, V. (2021). Super-hydrophobic coating based on acrylic resin A01. Solid State Phenom. 316: 720–725, https://doi.org/10.4028/www.scientific.net/ssp.316.720.Search in Google Scholar
Majd, M.T., Davoudi, M., Karati, M.R., Ghasemi, E., and Mahdavian, M. (2020). Construction of a smart active/barrier anti-corrosion system based on epoxy-ester/zinc intercalated kaolin nanocontainer for steel substrate. Constr. Build. Mater. 247: 118555, https://doi.org/10.1016/j.conbuildmat.2020.118555.Search in Google Scholar
Nikpour, B., Ramezanzadeh, B., Bahlakeh, G., and Mandavian, M. (2017). Synthesis of graphene oxide nanosheets functionalized by green corrosion inhibitive compounds to fabricate a protective system. Corros. Sci. 127: 240–259, https://doi.org/10.1016/j.corsci.2017.08.029.Search in Google Scholar
Ning, Y.J., Zhu, Z.R., Cao, W.W., Wu, L., Jing, L.C., Wang, T., Yuan, X.T., Teng, L.H., Bin, P.S., and Geng, H.Z. (2021). Anti-corrosion reinforcement of waterborne polyurethane coating with polymerized graphene oxide by the one-pot method. J. Mater. Sci. 56: 1–14, https://doi.org/10.1007/s10853-020-05243-9.Search in Google Scholar
Parhizkar, N., Shahrabi, T., and Ramezanzadeh, B. (2017). A New approach for enhancement of the corrosion protection properties and interfacial adhesion bonds between the epoxy coating and steel substrate through surface treatment by covalently modified amino functionalized graphene oxide film. Corros. Sci. 123: 55–75, https://doi.org/10.1016/j.corsci.2017.04.011.Search in Google Scholar
Pugazhenthi, I. and Ghouse, S.M. (2021). Corrosion protection performance of titania nanoparticles filled poly (4-methyl-5-vinylthiazole) applied on mild steel in 3.5% sodium chloride solution. J. Plast. Film Sheeting 37: 17–32, https://doi.org/10.1177/8756087920939301.Search in Google Scholar
Qian, M., Soutar, A.M., Tan, X.H., Zeng, M.T., and Wijesinghe, S.L. (2009). Two-part epoxy-siloxane hybrid corrosion protection coatings for carbon steel. Thin Solid Films 517: 5237–5242, https://doi.org/10.1016/j.tsf.2009.03.114.Search in Google Scholar
Radoman, T.S., Dzunuzovic, J.V., Jeremic, K.B., Grgur, B.N., Milicevic, D.S., Popovic, I.G., and Džunuzović, E.S. (2014). Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid ester. Mater Design 62: 158–167, https://doi.org/10.1016/j.matdes.2014.05.015.Search in Google Scholar
Ramezanzadeh, B. and Attar, M.M. (2011). Characterization of the fracture behavior and viscoelastic properties of epoxy-polyamide coating reinforced with nanometer and micrometer sized zno particles. Prog. Org. Coat. 71: 242–249, https://doi.org/10.1016/j.porgcoat.2011.03.004.Search in Google Scholar
Ramezanzadeh, B., Haeri, Z., and Ramezanzadeh, M. (2016). A facile route of making silica nanoparticles-covered graphene oxide nanohybrids (SiO2-GO); fabrication of SiO2-GO/epoxy composite coating with superior barrier and corrosion protection performance. Chem. Eng. 303: 511–528, https://doi.org/10.1016/j.cej.2016.06.028.Search in Google Scholar
Salimi, A., Maghsoudian, S., and Mirzataheri, M. (2016). Synthesis and characterization of the nano alumina-filled tetraglycidyl-4, 4’-diaminodiphenylmethane epoxy resin. Polym. Bull. 74: 1283–1298, https://doi.org/10.1007/s00289-016-1777-1.Search in Google Scholar
Sharifalhoseini, Z., Entezari, M.H., Davoodi, A., and Shahidi, M. (2020). Surface modification of mild steel before acrylic resin coating by hybrid ZnO/GO nanostructures to improve the corrosion protection. J. Ind. Eng. Chem. 83: 333–342, https://doi.org/10.1016/j.jiec.2019.12.006.Search in Google Scholar
Sinha Ray, S. and Okamoto, M. (2003). Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog. Polym. Sci. 28: 1539–1641, https://doi.org/10.1016/j.progpolymsci.2003.08.002.Search in Google Scholar
Tobilko, V., Spasonova, L., Kovalchuk, I., Kornilovych, B., and Kholodko, Y. (2019). Adsorption of uranium (VI) from aqueous solutions by amino-functionalized clay minerals. Colloids and Interfaces 3: 41, https://doi.org/10.3390/colloids3010041.Search in Google Scholar
Toloei, A., Atashin, S., and Bahrololoom, M.E. (2013). Corrosion-resistant properties of modified polymer/clay nanocomposites. Mater. Perform. 52: 38–42.10.1155/2013/648246Search in Google Scholar
Verpoest, I., Zorko, M., and Kocijan, A. (2015). Damage resistance and anticorrosion properties of nanosilica-filled epoxy-resin composite coatings. Prog. Org. Coat. 80: 20–26, https://doi.org/10.1016/j.porgcoat.2014.11.011.Search in Google Scholar
Wang, B., Wei, S.C., Huang, W., Wang, Y.J., Liang, Y., Guo, L., Chen, X.H., Pan, F.S., and Xu, B.S. (2019). Status and progress on anticorrosive coatings for marine application. Mater. Pro. 52: 132–138.Search in Google Scholar
Wei, X.B., Ning, C.M., Lu, Z.B., and Zhang, G.G. (2022). Si and N incorporated hydrogenated diamond like carbon film with excellent performance for marine corrosion resistance. Ceram. Int. 48: 8440–8450, https://doi.org/10.1016/j.ceramint.2021.12.052.Search in Google Scholar
Xia, Y., Zhang, N., Zhou, Z., Chen, C., Wu, T.Q., Zhong, F., Lv, Y.M., and He, Y. (2020). Incorporating SiO2 functionalized g-C3N4 sheets to enhance anticorrosion performance of waterborne epoxy. Prog. Org. Coat. 147: 105768, https://doi.org/10.1016/j.porgcoat.2020.105768.Search in Google Scholar
Xu, Z.Y., Yu, H.W., Zhai, W.K., and Wang, X. (2020). Research progress of marine epoxy coatings. Mater. Prot. 53: 93–97.Search in Google Scholar
Yang, D.J., Wang, S.Y., Zhong, R.S., Liu, W.F., and Oiu, X.Q. (2019). Preparation of lignin/TiO2 nanocomposites and their application in aqueous polyurethane coatings. Front. Chem. Sci. Eng. 13: 12, https://doi.org/10.1007/s11705-018-1712-0.Search in Google Scholar
Yang, J.Y., Song, Y.W., Dong, K.H., and Han, E.H. (2023). Research progress on the corrosion behavior of titanium alloys. Corros. Rev. 41: 5–20, https://doi.org/10.1515/corrrev-2022-0031.Search in Google Scholar
Zhang, Q., Liu, Q.F., Zhang, Y.D., Cheng, H.F., and Lu, Y.P. (2012). Silane-grafted silica-covered kaolinite as filler of styrene butadiene rubber. Appl. Clay Sci. 65–66: 134–138, https://doi.org/10.1016/j.clay.2012.04.024.Search in Google Scholar
Zhang, Y.D., Xiang, J.J., Zhang, Q., Liu, Q.F., and Frost, R.L. (2014). Influence of kaolinite/carbon black hybridization on combustion and thermal decomposition behaviors of NR composites. Thermochim. Acta 576: 39–46, https://doi.org/10.1016/j.tca.2013.12.001.Search in Google Scholar
Zhou, W.H., Wang, S.X., Sang, Y.L., Zhang, C.F., Liang, T.T., Liu, Q., Fan, Y.Z., Zhao, X., and Cao, X.M. (2021). Synthesis of h-BN modified GO to improve the corrosion resistance of the water-borne epoxy coating for hot-dip galvanized steel. Mater. Lett. 285: 129136, https://doi.org/10.1016/j.matlet.2020.129136.Search in Google Scholar
Zivkovic, L.S., Jegdic, B.V., Andric, V., Rhee, K.Y., Bajat, J.B., and Miskovic-Stankovic, V.B. (2019). The effect of ceria and zirconia nanoparticles on the corrosion behaviour of cataphoretic epoxy coatings on AA6060 alloy. Prog. Org. Coat. 136: 105219, https://doi.org/10.1016/j.porgcoat.2019.105219.Search in Google Scholar
© 2024 Walter de Gruyter GmbH, Berlin/Boston
