Issue

Vol. 34 No. 9 (2022): Vol 34 Issue 9

Copyright (c) 2022 AJC

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Morphology, Structure and Thermal Properties of Human Hair Keratin/ Egg White Protein Blend Particles: Influence of Different Crosslinking Agents

https://doi.org/10.14233/ajchem.2022.23888
S. Tanisood
The Center of Excellence Innovation in Chemistry (PERCH-CIC), Department of Chemistry, Faculty of Science, Mahasarakham University, Kantharawichai District, Maha Sarakham 44150, Thailand
W. Thongsomboon
The Center of Excellence Innovation in Chemistry (PERCH-CIC), Department of Chemistry, Faculty of Science, Mahasarakham University, Kantharawichai District, Maha Sarakham 44150, Thailand*Corresponding author: E-mail: prasong.s@msu.ac.th
P. Srihanam
The Center of Excellence Innovation in Chemistry (PERCH-CIC), Department of Chemistry, Faculty of Science, Mahasarakham University, Kantharawichai District, Maha Sarakham 44150, Thailand

Corresponding Author(s) : P. Srihanam

prasong.s@msu.ac.th

Asian Journal of Chemistry, Vol. 34 No. 9 (2022): Vol 34 Issue 9

Abstract

The effect of studied crosslinking agents viz. acetic acid, polyethylene glycol diglycidyl ether (PEGDE) and genipin on the morphology, structure and thermal properties of human hair keratin/egg white protein (HHK/EWP) blend particles were investigated. The HHK/EWP blend particles were prepared by the reported water-in-oil emulsification solvent diffusion method with the addition of selected crosslinking agents. Scanning electron microscopy (SEM) images revealed that the use of these agents resulted in spherical HHK/EWP particles with variable sizes, arranged in the order of increasing particle sizes as follows: acetic acid, PEGDE and genipin. The addition of the crosslinking agents enhanced the interactions between the proteins, as indicated by the shift of peak positions in FTIR spectra. Moreover, the interactions also increased the decomposition temperature of the HHK/EWP blend particles. The obtained results provided important information to further improve the properties of HHK/EWP blend particles for a wider range of applications.

Keywords

Biomaterial Human hair keratin Egg white protein Crosslinking agent Morphology Secondary structure
Tanisood, S., Thongsomboon, W., & Srihanam, P. (2022). Morphology, Structure and Thermal Properties of Human Hair Keratin/ Egg White Protein Blend Particles: Influence of Different Crosslinking Agents. Asian Journal of Chemistry, 34(9), 2307–2310. https://doi.org/10.14233/ajchem.2022.23888
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. T. Posati, D. Giuri, M. Nocchetti, A. Sagnella, M. Gariboldi, C. Ferroni, G. Sotgiu, G. Varchi, R. Zamboni and A. Aluigi, Eur. Polym. J., 105, 177 (2018); https://doi.org/10.1016/j.eurpolymj.2018.05.030
  2. P.B. Malafaya, G.A. Silva, R.L. Reis and S.N. Khot, Adv. Drug Deliv. Rev., 59, 207 (2007); https://doi.org/10.1016/j.addr.2007.03.012
  3. M. Okhawilai, R. Rangkupan, S. Kanokpanont and S. Damrongsakkul, Int. J. Biol. Macromol., 46, 544 (2010); https://doi.org/10.1016/j.ijbiomac.2010.02.008
  4. P. Srihanam, Y. Srisuwan, T. Imsombut and Y. Baimark, Korean J. Chem. Eng., 28, 293 (2011); https://doi.org/10.1007/s11814-010-0322-4
  5. O. Cheerarot and Y. Baimark, E-Polymers, 15, 67 (2015); https://doi.org/10.1515/epoly-2014-0134
  6. T. Tanabe, N. Okitsu, A. Tachibana and K. Yamauchi, Biomaterials, 23, 817 (2002); https://doi.org/10.1016/S0142-9612(01)00187-9
  7. S. Reichl, Biomaterials, 30, 6854 (2009); https://doi.org/10.1016/j.biomaterials.2009.08.051
  8. J. Yuan, J. Geng, Z. Xing, K.-J. Shim, I. Han, J.-C. Kim, I.-K. Kang and J. Shen, J. Tissue Eng. Regen. Med., 9, 1027 (2015); https://doi.org/10.1002/term.1653
  9. J.G. Rouse and M.E. Van Dyke, Materials, 3, 999 (2010); https://doi.org/10.3390/ma3020999
  10. M. Zoccola, A. Aluigi and C. Tonin, J. Mol. Struct., 938, 35 (2009); https://doi.org/10.1016/j.molstruc.2009.08.036
  11. Y. Dou, B. Zhang, M. He, G. Yin and Y. Cui, Chin. J. Chem. Eng., 24, 415 (2016); https://doi.org/10.1016/j.cjche.2015.11.007
  12. K. Yamauchi, M. Maniwa and T. Mori, J. Biomater. Sci., 9, 259 (1998); https://doi.org/10.1163/156856298X00640
  13. B. Srinivasan, R. Kumar, K. Shanmugam, U.T. Sivagnam, N.P. Reddy and P.K. Sehgal, J. Biomed. Mater. Res. B Appl. Biomater., 92, 5 (2010); https://doi.org/10.1002/jbm.b.31483
  14. T. Posati, G. Sotgiu, G. Varchi, C. Ferroni, R. Zamboni, F. Corticelli, D. Puglia, L. Torre, A. Terenzi and A. Aluigi, Mater. Des., 110, 475 (2016); https://doi.org/10.1016/j.matdes.2016.08.017
  15. K.K. Nayak and P. Gupta, Mater. Sci. Eng. C, 77, 1088 (2017); https://doi.org/10.1016/j.msec.2017.04.042
  16. D.C. Roy, S. Tomblyn, C.J. Kowalczewski, D.M. Burmeister, K.M. Isaac, L.R. Burnett and R.J. Christy, Wound Repair Regen., 24, 657 (2016); https://doi.org/10.1111/wrr.12449
  17. H. Xu, S. Cai, L. Xu and Y. Yang, Langmuir, 30, 8461 (2014); https://doi.org/10.1021/la500768b
  18. P. Gupta and K.K. Nayak, Int. J. Biol. Macromol., 85, 141 (2016); https://doi.org/10.1016/j.ijbiomac.2015.12.010
  19. D. Saravanan, A. Sameera, A. Moorthi and N. Selvamurugan, Int. J. Biol. Macromol., 62, 481 (2013); https://doi.org/10.1016/j.ijbiomac.2013.09.034
  20. K.K. Nayak and P. Gupta, Int. J. Biol. Macromol., 81, 1 (2015); https://doi.org/10.1016/j.ijbiomac.2015.07.025
  21. D.A. Omana, J. Wang and J. Wu, Trends Food Sci. Technol., 21, 455 (2010); https://doi.org/10.1016/j.tifs.2010.07.001
  22. R. Vilcacundo, P. Méndez, W. Reyes, H. Romero, A. Pinto and W. Carrillo, Sci. Pharm., 86, E48 (2018); https://doi.org/10.3390/scipharm86040048
  23. S. Guha, K. Majumder and Y. Mine, Encyclopedia of Food Chemistry, Oxford: Academic Press, p. 74 (2019).
  24. N. Abeyrathne, X. Huang and D.U. Ahn, Poult. Sci. J., 97, 1462 (2018); https://doi.org/10.3382/ps/pex399
  25. W. Carrillo, H. Spindola, M. Ramos, I. Recio and J.E. Carvalho, J. Med. Food, 19, 978 (2016); https://doi.org/10.1089/jmf.2015.0141
  26. S. Kim, Bioresour. Technol., 99, 2032 (2008); https://doi.org/10.1016/j.biortech.2007.02.050
  27. A.K. Mohanty, P. Tummala, W. Liu, M. Misra, P.V. Mulukutla and L.T. Drzal, J. Polym. Environ., 13, 279 (2005); https://doi.org/10.1007/s10924-005-4762-6
  28. P. Tummala, W. Liu, L.T. Drzal, A.K. Mohanty and M. Misra, Ind. Eng. Chem. Res., 45, 7491 (2006); https://doi.org/10.1021/ie060439l
  29. J. González-Gutiérrez, P. Partal, M. García-Morales and C. Gallegos, Carbohydr. Polym., 84, 308 (2011); https://doi.org/10.1016/j.carbpol.2010.11.040
  30. L. Fernández-Espada, C. Bengoechea, F. Cordobés and A. Guerrero, Food Bioprod. Process., 91, 319 (2013); https://doi.org/10.1016/j.fbp.2012.11.009
  31. M.L. López-Castejón, C. Bengoechea, M. García-Morales and I. Martínez, Carbohydr. Polym., 152, 62 (2016); https://doi.org/10.1016/j.carbpol.2016.06.041
  32. X. Liu, K. Li, C. Wu, Y. Zhou and C. Pei, Ceram. Int., 45, 23869 (2019); https://doi.org/10.1016/j.ceramint.2019.08.152
  33. S. Tanisood and P. Srihanam, Asian J. Chem., 33, 1557 (2021); https://doi.org/10.14233/ajchem.2021.23216
  34. S. Dimida, C. Demitri, V.M. De Benedictis, F. Scalera, F. Gervaso and A. Sannino, J. Appl. Polym. Sci., 132, 42256 (2015); https://doi.org/10.1002/app.42256
  35. L.-T. Lee, H.-R. Chien and C.-T. Yang, J. Polym. Res., 23, 1 (2016); https://doi.org/10.1007/s10965-015-0892-2
  36. S.L. DeGeer, L. Wang, G.N. Hill, M. Singh, S.F. Bilgili and C.L. Bratcher, Meat Sci., 118, 28 (2016); https://doi.org/10.1016/j.meatsci.2016.03.008
  37. T.F.M. Moreira, A. de Oliveira, T.B.V. da Silva, A.R. Dos Santos, O.H. Gonçalves, R.S. Gonzalez, A.A. Droval and F.V. Leimann, Lebensm. Wiss. Technol., 103, 69 (2019); https://doi.org/10.1016/j.lwt.2018.12.040
  38. A. Mohan and F.W. Pohlman, Lebensm. Wiss. Technol., 65, 868 (2016); https://doi.org/10.1016/j.lwt.2015.08.077
  39. F.E. Bailey and J.V. Koleske, Surfactant Science Series, Marcel Dekker: New York, p. 35 (1991).
  40. S. Zalipsky, Bioconjug. Chem., 6, 150 (1995); https://doi.org/10.1021/bc00032a002
  41. C. Nunes, M.A. Coimbra and P. Ferreira, Chem. Rec., 18, 1138 (2018); https://doi.org/10.1002/tcr.201700112
  42. M. Mekhail, K. Jahan and M. Tabrizian, Carbohydr. Polym., 108, 91 (2014); https://doi.org/10.1016/j.carbpol.2014.03.021
  43. Z. Wei, Y. Cheng, J. Zhu and Q. Huang, Food Hydrocoll., 94, 561 (2019); https://doi.org/10.1016/j.foodhyd.2019.04.008
  44. Y.Y. Zhao and Z.T. Sun, Int. J. Food Prop., 20(sup3), 2822 (2017); https://doi.org/10.1080/10942912.2017.1381111
  45. E. Abeyrathne, H.Y. Lee and D.U. Ahn, Poult. Sci., 92, 3292 (2013); https://doi.org/10.3382/ps.2013-03391
  46. Z. Wei, P. Zhu and Q. Huang, Food Hydrocoll., 87, 448 (2019); https://doi.org/10.1016/j.foodhyd.2018.08.036
  47. X. Xu, B. Liu, M. Zhang, S. Liu, F. Zhu and J. Wang, J. Polym. Res., 23, 9 (2016); https://doi.org/10.1007/s10965-015-0900-6
Read More
Author biographies is not available.
Download
PDF
Statistic
Read Counter : 0 Download : 0