Peer Review History
Original SubmissionAugust 26, 2021 |
---|
PONE-D-21-27091Assessment of End-of-life Vehicle Recycling: Remanufacturing Waste Sheet Steel into Mesh SheetPLOS ONE Dear Dr. Tariq, Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process. Please submit your revised manuscript by Nov 11 2021 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file. Please include the following items when submitting your revised manuscript:
If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter. If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols. We look forward to receiving your revised manuscript. Kind regards, Huan Li Academic Editor PLOS ONE Journal Requirements: When submitting your revision, we need you to address these additional requirements. 1. Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and 2. Thank you for stating the following financial disclosure: [NO]. At this time, please address the following queries: a) Please clarify the sources of funding (financial or material support) for your study. List the grants or organizations that supported your study, including funding received from your institution. b) State what role the funders took in the study. If the funders had no role in your study, please state: “The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.” c) If any authors received a salary from any of your funders, please state which authors and which funders. d) If you did not receive any funding for this study, please state: “The authors received no specific funding for this work.” Please include your amended statements within your cover letter; we will change the online submission form on your behalf. 3. Please amend either the abstract on the online submission form (via Edit Submission) or the abstract in the manuscript so that they are identical. [Note: HTML markup is below. Please do not edit.] Reviewers' comments: Reviewer's Responses to Questions Comments to the Author 1. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. Reviewer #1: Yes Reviewer #2: Partly ********** 2. Has the statistical analysis been performed appropriately and rigorously? Reviewer #1: Yes Reviewer #2: N/A ********** 3. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified. Reviewer #1: Yes Reviewer #2: Yes ********** 4. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here. Reviewer #1: Yes Reviewer #2: Yes ********** 5. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters) Reviewer #1: 1. The manuscript assessed producing Mesh Sheet from recycled waste sheet steel. 2. The manuscript’s strength is based on data in the manufacturing plant in Iraq. The weakness is that it is unclear whether these findings can be applied to other regions since the assessment results are based on a specific manufacturing plant. 3. Provide a point-by-point list of my major recommendations for the improvement of the manuscript; In Conclusion, include any quantitative findings from the evaluation. The evaluation results should be graphed in addition to tables to facilitate visual understanding. 4. If necessary, provide a point-by-point list of my minor for the improvement of the manuscript. On page 11, Line 4, the reference source is not found. On page 12, Line 6, the reference source is not found. On page 14, Line 3, the reference source is not found. On page 15, Line 5, the reference source is not found. On page 15, Line 44, what is the definition of ‘d’? On page 17, Line 12, the reference source is not found. On page 19, Line 22, the reference source is not found. On page 20, Line 15, the reference source is not found. On page 21, Line 6, the reference source is not found. On page 23, Line 9, the reference source is not found. On page 29, Line 11, MSS from MSS is not correct. Reviewer #2: 1. Proper management of ELVs, including remanufacturing, recycling and reuse, is a necessary task towards sustainable development. It is worth making continuous efforts to enhance ELV management practices. The study presented in this manuscript is encouraged. It is hoped that the manuscript can be improved with the following suggestions. 2. Many missing links exist throughout the manuscript which are shown as “Error! Reference not found.” and must be corrected. These references, based on the context, may provide fundamental information for this study. Unable to refer to those references, the discussion developed in Method and Results sections seems to be interrupted. 3. (Epsilon) ecc, (Epsilon) rem and (Epsilon) rec are not introduced in the text. Thus, the rationale for Eq.(12) to (14) can not be understood. 4. Weights of engine and transmission consist of a large proportion of total weight of automobiles. It seems that the author counts their weights in estimating economical potential; however, only exterior components are considered in the feasibility calculation in the study. How are they considered in WSS? Is it practical to assume 80 m2 of sheet can be recovered by ~698 kg per car for remanufacturing as stated in the Results section? 5. Table 1 entitles “Weights of the components of WEPrD”; however, Table 1 contains weights for pre-disassembly, post-disassembly and expanding. The title of Table 1 may need to be revised. Besides, it is suggested to indicate the nature of values by notations, such as “estimated”, “calculated” and etc, if data presented in the table are generated in this study, to clarify whether those values are retrieved from literature or calculated results of this study. 6. Opinions from the author on differences among Reuse, recycling and remanufacturing of WSS may be explained more explicitly, regarding technical, economical and environmental feasibility. It is suggested to revise the discussion to illustrate the comparison among these processes from the viewpoint of the author. 7. There are some items in Results for discussion which were not mentioned in previous Introduction and Method sections, such as, remanufacturing feasibility assessment, and etc. It is suggested to explain their relationships with other indexes. 8. Quite a few paragraphs are used to discuss ASR and other materials in the disassembly plants. It is suggested to focus discussions on how WSS may contribute to MSS with technological or management strategies. 9. The manuscript is suggested to provide page numbers for both reviewing and reading purposes. 10. Most terms have full names followed by abbreviations when they first appear in the manuscript; however, there are still some missing. Also, some typos exist in the text. Please double check for accuracy. ********** 6. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy. Reviewer #1: Yes: Toshihiko Nakata Reviewer #2: No [NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.] While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/. PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org. Please note that Supporting Information files do not need this step. |
Revision 1 |
PONE-D-21-27091R1Assessment of End-of-life Vehicle Recycling: Remanufacturing Waste Sheet Steel into Mesh SheetPLOS ONE Dear Dr. Abdullah, Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process. Please submit your revised manuscript by Dec 19 2021 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file. Please include the following items when submitting your revised manuscript:
If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols. We look forward to receiving your revised manuscript. Kind regards, Huan Li Academic Editor PLOS ONE Journal Requirements: Please review your reference list to ensure that it is complete and correct. If you have cited papers that have been retracted, please include the rationale for doing so in the manuscript text, or remove these references and replace them with relevant current references. Any changes to the reference list should be mentioned in the rebuttal letter that accompanies your revised manuscript. If you need to cite a retracted article, indicate the article’s retracted status in the References list and also include a citation and full reference for the retraction notice. [Note: HTML markup is below. Please do not edit.] Reviewers' comments: Reviewer's Responses to Questions Comments to the Author 1. If the authors have adequately addressed your comments raised in a previous round of review and you feel that this manuscript is now acceptable for publication, you may indicate that here to bypass the “Comments to the Author” section, enter your conflict of interest statement in the “Confidential to Editor” section, and submit your "Accept" recommendation. Reviewer #1: (No Response) Reviewer #2: (No Response) ********** 2. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. Reviewer #1: Yes Reviewer #2: Yes ********** 3. Has the statistical analysis been performed appropriately and rigorously? Reviewer #1: Yes Reviewer #2: N/A ********** 4. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified. Reviewer #1: Yes Reviewer #2: Yes ********** 5. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here. Reviewer #1: Yes Reviewer #2: Yes ********** 6. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters) Reviewer #1: This decision was based on the following two points. The table showing the results is merely a list of numbers, without any quantitative or qualitative analysis. There is a lot of value in organizing the results into graphs instead of tables, but the author does not do so. The conclusion lacks the results of quantitative or qualitative analysis. Reviewer #2: 1. Figure 1 and 2 are attached after the text should be provided with their Titles? According to the context, is Figure 1 supposed to show a remanufacturing process for converting WSS from ELVs into MSS? 2. In equation (14), (epsilon)�rec and �rem are functions of �ecc and �CO2, which are defined in equation(12) and (13) and they are explained in the paragraph. However, (epsilon)�rec and �rem must have different values of �ecc and �CO2 since their Mvss, Mco2, and �vss, right? My question is how are those values determined? They should be also be stated in this Methods section. 3. The estimation of 754 kg steel/ELV recycled from ~ 1 t/ELV, p10, includes weights of engine and transmission which are not considered as WSS. It should be distinguished clearly by using weights of vehicles with reuse, remanufacturing and recycling alternatives in discussion of the economical and environmental efficiencies in the manuscript. ********** 7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy. Reviewer #1: No Reviewer #2: No [NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.] While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/. PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org. Please note that Supporting Information files do not need this step. |
Revision 2 |
Assessment of End-of-life Vehicle Recycling: Remanufacturing Waste Sheet Steel into Mesh Sheet PONE-D-21-27091R2 Dear Dr. Abdullah, We’re pleased to inform you that your manuscript has been judged scientifically suitable for publication and will be formally accepted for publication once it meets all outstanding technical requirements. Within one week, you’ll receive an e-mail detailing the required amendments. When these have been addressed, you’ll receive a formal acceptance letter and your manuscript will be scheduled for publication. An invoice for payment will follow shortly after the formal acceptance. To ensure an efficient process, please log into Editorial Manager at http://www.editorialmanager.com/pone/, click the 'Update My Information' link at the top of the page, and double check that your user information is up-to-date. If you have any billing related questions, please contact our Author Billing department directly at authorbilling@plos.org. If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they’ll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org. Kind regards, Huan Li Academic Editor PLOS ONE Additional Editor Comments (optional): Reviewers' comments: |
Formally Accepted |
PONE-D-21-27091R2 Assessment of End-of-life Vehicle Recycling: Remanufacturing Waste Sheet Steel into Mesh Sheet Dear Dr. Abdullah: I'm pleased to inform you that your manuscript has been deemed suitable for publication in PLOS ONE. Congratulations! Your manuscript is now with our production department. If your institution or institutions have a press office, please let them know about your upcoming paper now to help maximize its impact. If they'll be preparing press materials, please inform our press team within the next 48 hours. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information please contact onepress@plos.org. If we can help with anything else, please email us at plosone@plos.org. Thank you for submitting your work to PLOS ONE and supporting open access. Kind regards, PLOS ONE Editorial Office Staff on behalf of Dr. Huan Li Academic Editor PLOS ONE |
Open letter on the publication of peer review reports
PLOS recognizes the benefits of transparency in the peer review process. Therefore, we enable the publication of all of the content of peer review and author responses alongside final, published articles. Reviewers remain anonymous, unless they choose to reveal their names.
We encourage other journals to join us in this initiative. We hope that our action inspires the community, including researchers, research funders, and research institutions, to recognize the benefits of published peer review reports for all parts of the research system.
Learn more at ASAPbio .