Abstract

A laser absorption spectroscopy diagnostic integrated within a hardened optical probe was used to measure temperature and water mole fraction at 500 kHz in post-detonation fireballs of explosives. In the experiments, an exploding-bridgewire detonator initiated a 25 g hemisphere of explosive (N5 or PETN). This produced a hemispherical fireball that traveled radially towards a hardened measurement probe. The probe contained a pressure transducer and optical equipment to pitch fiber-coupled laser light across a 12.6 cm gap onto a detector. Tunable diode lasers emitting near 7185.6 and $6806\;{{\rm cm}^{- 1}}$ were used to measure the absorbance spectrum of ${{\rm H}_2}{\rm O}$ utilizing peak-picking scanned-wavelength-modulation spectroscopy with a scan frequency of 500 kHz and modulation frequencies of 35 and 45.5 MHz, respectively. This enabled measurements of temperature and ${{\rm X}_{{{\rm H}_2}{\rm O}}}$ in the shock-heated air and trailing fireball at 500 kHz. Time histories of pressure, temperature, and ${{\rm H}_2}{\rm O}$ mole fraction were acquired at different standoff distances to quantify how the fireball evolved in space and time as well as to compare measured quantities between PETN and N5 fireballs. The standard deviation of temperature and ${{\rm X}_{{{\rm H}_2}{\rm O}}}$ during one representative test were found to be 17 K (1.3%) and 0.011 (5%), respectively. These measurements demonstrate this diagnostic’s ability to provide rapid and reliable measurements in harsh, highly transient post-detonation environments produced by solid explosives.

© 2023 Optica Publishing Group

Quantum-cascade-laser-absorption-spectroscopy diagnostic for temperature, pressure, and NO X ² Π _1/2 at 500 kHz in shock-heated air at elevated pressures

Jonathan J. Gilvey, Morgan D. Ruesch, Kyle A. Daniel, Charley R. Downing, Kyle P. Lynch, Justin L. Wagner, and Christopher S. Goldenstein
Appl. Opt. 62(6) A12-A24 (2023)

H₂O and temperature measurements in propagating hydrogen/oxygen flames using a broadband swept-wavelength ECQCL

Mark C. Phillips, Austin Butler, Nick G. Glumac, Michael C. DeMagistris, Morgan Ruesch, Andrea C. Zambon, and Neeraj Sinha
Appl. Opt. 62(29) 7643-7657 (2023)

Broadband ultrafast-laser-absorption spectroscopy for multi-hydrocarbon measurements near 3.3 µm in flames

Ziqiao Chang, Ryan J. Tancin, Vishnu Radhakrishna, Robert P. Lucht, and Christopher S. Goldenstein
Appl. Opt. 62(17) 4681-4690 (2023)

Four-color fiber-coupled mid-infrared laser-absorption sensor for temperature, CO, CO₂, and NO at 5 kHz in internal combustion engine vehicle exhaust

Joshua W. Stiborek, Charles J. Schwartz, Nathan J. Kempema, Joseph J. Szente, Michael J. Loos, and Christopher S. Goldenstein
Appl. Opt. 62(32) 8517-8528 (2023)

Single-ended mid-infrared laser-absorption sensor for simultaneous in situ measurements of H₂O, CO₂, CO, and temperature in combustion flows

Wen Yu Peng, Christopher S. Goldenstein, R. Mitchell Spearrin, Jay B. Jeffries, and Ronald K. Hanson
Appl. Opt. 55(33) 9347-9359 (2016)