1975 Volume 18 Issue 125 Pages 1332-1339
The main objective of this paper is to discuss on the theoretical formula and practical equation for the fillet stress of the gear tooth in case when the hollow hub is force-fitting in the hollow hub, and also is to investigate the fillet stress in case when hollow hubs of various shapes are force-fitting. The authors measured the fillet stress of gear tooth by means of strain gauge and photo-elastic experiments for each force-fitted hub, and these experimental results were compared with calculated ones by the transform function and finite element method. Consequently the theoretical and practical formula could be introduced for the fillet stress of gear tooth with force-fitted hubs mentioned above, and it was found that calculated values agree fairly well with experimental results.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials