日本化学会誌(化学と工業化学)
Online ISSN : 2185-0925
Print ISSN : 0369-4577
Raney型Ni-Al2O3,Ni-Cr2O3Al2O3触媒の耐熱性
清水 正隆武岡 壮
著者情報
ジャーナル フリー

1981 年 1981 巻 6 号 p. 1034-1036

詳細
抄録

In order to develop thermostable Raney-type catalysts for the methanation of carbon mono xide, the method of pieparing the Raney-type nickel catalysts was examined. The thermal stabilities of the Ni-Al2O3 catalysts depend remarkably on their pretreatment. The thermal stability decreased in the following order: (calcined in air at 550°C)>(calcined in N2 at 460°C)>(without pretreatment) (Fig.2). For the Ni-Cr2O3Al2O3 catalysts, the extent of the increase in the Ni crystallite size and the decrease in the amount of H2 chemisorption during a thermal stability test were found smaller than those by the Ni-Al2O3 catalysts (Table 1). The Ni-Cr2O3Al2O3 catalyst calcined at 550°C was found to be most thermostable of the catalysts tested in this study.

著者関連情報

この記事は最新の被引用情報を取得できません。

© The Chemical Society of Japan
前の記事 次の記事
feedback
Top