YuTing Tang
ABSTRACT
In order to break the limitations on field applications of steady-state thermal conductivity measurement techniques, a new measuring system using the method termed point-heating steady state thermal conductivity measurement method is developed in this work. A corresponding 3D thermal transport model has been built to correlate the surface temperature rise with the incident heat flux, sample's thermal conductivity, and the location for temperature probing. The surface temperature is monitored by an infrared camera, which is easily affected by ambient temperature and humidity. BP neural network model is then employed to predict the influence of ambient temperature and humidity on the measuring instrument of thermal conductivity. The generalization and robustness of the BP neural network model are further verified by comparison with outputs of linear fitting and nonlinear fitting. The prediction model of F (x, y, z) based on BP neural network has good accuracy, and the error is between -0.17 and +0.17, which also improves the speed of measuring the thermal conductivity of the measuring instrument.
- S Wu, XH Li, XZ Yang, et al. (2015). Optimization of thermal insulation materials for inflatable mini cold storage. New Chemical Materials, 43(10), 202--204.Google Scholar
- WD Liu, B Tian, ZY Hou (2012). Experimental study on thermal conductivity of concrete. Journal of China & Foreign Highway, 32(1), 226--229.Google Scholar
- YC Dai, XS Wang, H Huang, et al. (2014). Analysis and design of edge heat leakage from spacecraft multilayer insulation. Journal of Astronautics, 35(1), 76--82.Google Scholar
- KA Murashko, AV Mityakov, J Pyrhonen, et al. (2014). Thermal parameters determination of battery cells by local heat flux measurements. Journal of Power Sources, 271, 48--54.Google ScholarCross Ref
- WD Ma, JJ Shi, XW Bu (2014). Improvement and realization of thermal conductivity test method of aluminum-based copper clad laminate. Insulating Materials, 47(3), 103--107.Google Scholar
- S Yu, YM Cui, C Feng, et al. (2016). Systematic errors in steady-state measurements on the thermal conductivities of insulation materials. Building Science, 32(10), 50--54.Google Scholar
- L Li, H Xiao, BW Cheng, et al. (2016). Testing of thermal conductivity of fiber based on transient plane heat source method. Journal of Textile Research, 37(12), 18--23.Google Scholar
- CY Luo, LP Yang, Y Tao, et al. (2015). Determination of minimum thickness of material in thermal conductivity measurement with hot-strip method. Research and Exploration in Laboratory, 34(8), 28--31.Google Scholar
- CW Zhang, LY Li, DG Zhao (2017). Estimation and simulation of power battery SOC based on BP neural network. Chinese Journal of Power Sources, 41(9), 1356--1357.Google Scholar
- BHM Sadeghi (2000). A BP-neural network predictor model for plastic injection molding process. Journal of Materials Processing Technology, 103(3), 411--416.Google ScholarCross Ref
- H Fei and L Zhang (2018). Prediction model of end-point phosphorus content in BOF steelmaking process based on PCA and BP neural network. Journal of Process Control, 66, 51--58.Google ScholarCross Ref
- T Ash (1989). Dynamic Node Creation in Backpropagation Networks. Connection Science, 1(4), 365--375.Google ScholarCross Ref
- F Shen, C Pan, X Ren (2007). Research of P2P Traffic Identification Based on BP Neural Network. International Conference on International Information Hiding & Multimedia Signal Processing. IEEE Computer Society.Google ScholarDigital Library
Index Terms
- Prediction on the influence of ambient temperature and humidity to measuring instrument of thermal conductivity based on BP neural network
Recommendations
Influence of the temperature dependence of thermal parameters of heat conduction models on the reconstruction of thermal history of igneous-intrusion-bearing basins
Heat conduction models are important tools for reconstructing the thermal history of sedimentary basins affected by magmatic intrusions. Accurate thermal properties of the intrusion and its wall rocks are crucial for accurate predictions of thermal ...
Temperature Prediction Model of Rotary Kiln Firing Zone Based on Improved BP Neural Network
ISDEA '12: Proceedings of the 2012 Second International Conference on Intelligent System Design and Engineering ApplicationThe temperature of the burning zone in the acquisition process is not stable and has an important impact on the quality of pellet. In order to improve the burning zone temperature stability, zone of combustion temperature prediction model is proposed ...
Effect of temperature and composition on thermal properties of carbon steel
CCDC'09: Proceedings of the 21st annual international conference on Chinese control and decision conferenceTo simulate steel continuous process (such as induction heating of steel wire) accurately, the relevant thermal properties of carbon steel (within 0.06 to 1.22 wt. % of carbon) were determined as a function of temperature and carbon contents by multiple ...
Comments