Paper
3 January 1986 Coupling between Plastic Scintillators and Light Fibers for Remote Detection of X-rays
T. S. Perry, J. J. Molitoris
Author Affiliations +
Abstract
Plastic scintillators can be coupled to light fibers to make small, simple, and inexpensive x-ray detectors. These detectors have been developed for use at the Nevada Test Site (NTS) for the remote detection of x-rays. Light produced in the scintillator can be transmitted by the fiber for several hundred meters to a photodetector, which is usually a streak camera or a photomultiplier tube. The use of a streak camera allows many channels to be recorded simultaneously. A parameter study has been done to measure the sensitivity of these detectors as a function of scintillator geometry, type of scintillator, coupling geometry, and x-ray energy. The results can be qualitatively explained by a simple geometric theory. A recent use of these detectors at NTS was the measurement of an x-ray spectrum. System performance for this measurement will be reviewed.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. S. Perry and J. J. Molitoris "Coupling between Plastic Scintillators and Light Fibers for Remote Detection of X-rays", Proc. SPIE 0566, Fiber Optic and Laser Sensors III, (3 January 1986); https://doi.org/10.1117/12.949793
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Scintillators

Sensors

Optical fibers

X-rays

X-ray detectors

Fiber optics

Fiber optics sensors

RELATED CONTENT

Current trends in fiber optic sensor technology
Proceedings of SPIE (March 09 1994)
Fiber Optic Radiation Dosimetry
Proceedings of SPIE (February 13 1990)
Noise Problems In Rotation Sensors
Proceedings of SPIE (January 03 1986)

Back to Top