Paper
17 September 1998 Hydrogen on-orbit storage and supply (HOSS) thermal design and analysis
Curtis M. Bingham, Scott H. Schick, J. Clair Batty
Author Affiliations +
Abstract
This paper describes the thermal design and analysis of the HOSS (Hydrogen On-Orbit Storage and Supply) liquid hydrogen dewar. This task is being carried out by the Space Dynamics Laboratory at Utah State University under contract from NASA Lewis Research Center. The vacuum jacketed 80-liter dewar is designed for a mission life greater than 30 days. The design uses concentric G-10 fiberglass support tubes and multilayer insulation to thermally isolate the hydrogen tank. Heat load trade off studies were performed based on the support tube thickness, plumbing size, and vacuum shell temperature. The dewar employs a liquid nitrogen cooled shield to provide a non-venting ground hold capability of more than 96 hours for launch preparation. Analysis has shown that a greater than 30 day mission is feasible even with a mechanically robust design capable of withstanding most launch environments.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Curtis M. Bingham, Scott H. Schick, and J. Clair Batty "Hydrogen on-orbit storage and supply (HOSS) thermal design and analysis", Proc. SPIE 3435, Cryogenic Optical Systems and Instruments VIII, (17 September 1998); https://doi.org/10.1117/12.323726
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Hydrogen

Nitrogen

Liquids

Aluminum

Helium

Analytical research

Satellites

Back to Top