Poster + Paper
7 December 2022 New wavefront phase sensor used for 3D shape measurements of silicon wafers
Author Affiliations +
Conference Poster
Abstract
Wave Front Phase Imaging (WFPI) is a new wafer shape measurement technique that acquires millions of data points in just seconds or less, on a full 300mm silicon wafer. This provides lateral resolution well below 100μm with the possibility of reaching the lens’ optical resolution limitation between 3-4μm. The system has high repeatability with root-mean-square (RMS) standard deviation (σRMS) in the single digit nm for the global wafer shape geometry and for nanotopography it reaches in the sub ångström (Å = 10-10 m) range. WFPI can collect data on the entire wafer to within a single pixel away from the wafer edge roll off1. The flatness of the silicon wafers used to manufacture integrated circuits (IC) is controlled to tight tolerances to help ensure that the full wafer is sufficiently flat for lithographic processing. Advanced lithographic patterning processes require a detailed map of the wafer shape to avoid overlay errors caused by depth-of-focus issues2. In this paper we go deep into the theoretical explanation as to how the wave front phase sensor works.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Juan M. Trujillo-Sevilla, Alex Roqué-Velasco, Miguel Jesús Sicilia, Óscar Casanova-González, Jose Manuel Ramos-Rodríguez, and Jan O. Gaudestad "New wavefront phase sensor used for 3D shape measurements of silicon wafers", Proc. SPIE 12274, Emerging Imaging and Sensing Technologies for Security and Defence VII, 122741F (7 December 2022); https://doi.org/10.1117/12.2645969
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Silicon

Wavefronts

Cameras

Reflectivity

Sensors

3D metrology

RELATED CONTENT


Back to Top