Thermal effects in hybrid optical photonic organic devices

Andre F. S. Guedes; Rodrigo M. Krischke; Michele G. M. Machado; Daniel Furtado; Simone Tartari

doi:10.1117/12.2596478

1 August 2021 Thermal effects in hybrid optical photonic organic devices

Andre F. S. Guedes, Rodrigo M. Krischke, Michele G. M. Machado, Daniel Furtado, Simone Tartari

Proceedings Volume 11802, Nanoengineering: Fabrication, Properties, Optics, Thin Films, and Devices XVIII; 1180212 (2021) https://doi.org/10.1117/12.2596478
Event: SPIE Nanoscience + Engineering, 2021, San Diego, California, United States

Conference Poster

Abstract

The development of Hybrid Optical Photonic Organic Devices, using an optically transparent substrate material and organic semiconductor materials, has been widely utilized by the electronic industry when producing new technological products. The Hybrid Optical Photonic Organic Device constructed in this work is electrochromic device with solar cell are the base Poly (3,4-ethylenedioxythiophene), PEDOT:PSS, Poly(3-hexyl thiophene, P3HT, Phenyl-C61-butyric acid methyl ester, PCBM and Polyaniline, PANI, were deposited in Indium Tin Oxide, ITO, and characterized by Electrical Measurements and Scanning Electron Microscopy (SEM). In addition, the thin film obtained by the deposition of PANI, prepared in perchloric acid solution, was identified through PANI-X1. The result obtained by electrical Measurements has demonstrated that the PET/ITO/PEDOT:PSS/P3HT:PCBM Blend/ PANI-X1/ITO/PET layer presents the characteristic curve of standard solar cell after spin-coating and electrodeposition. The Thin film obtained by electrodeposition of PANI-X1 on P3HT/PCBM Blend was prepared in perchloric acid solution. The thermal effects from ultraviolet irradiation under the device’s surface, in the irradiation simulator chamber, demonstrated a 15% reduction in the device’s lifetime. The inclusion of the PANI-X1 layer reduced the effects of degradation these organic photovoltaic panels induced for solar irradiation, a fact that also observed in the irradiation in the simulation chamber. In Scanning Electron Microscopy (SEM) these studies reveal that the surface of PANI-X1 layers is strongly conditioned by the surface morphology of the dielectric.

Conference Presentation

Citation Download Citation

Andre F. S. Guedes, Rodrigo M. Krischke, Michele G. M. Machado, Daniel Furtado, and Simone Tartari "Thermal effects in hybrid optical photonic organic devices", Proc. SPIE 11802, Nanoengineering: Fabrication, Properties, Optics, Thin Films, and Devices XVIII, 1180212 (1 August 2021); https://doi.org/10.1117/12.2596478

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available