Effect of electrode composition and patterning method on the lifetime of silicone-based dielectric elastomer actuators (DEA) under different environmental conditions

Fabio B. Albuquerque; Herbert Shea

doi:10.1117/12.2581071

22 March 2021 Effect of electrode composition and patterning method on the lifetime of silicone-based dielectric elastomer actuators (DEA) under different environmental conditions

Fabio B. Albuquerque, Herbert Shea

Author Affiliations +

Proceedings Volume 11587, Electroactive Polymer Actuators and Devices (EAPAD) XXIII; 115871B (2021) https://doi.org/10.1117/12.2581071
Event: SPIE Smart Structures + Nondestructive Evaluation, 2021, Online Only

Abstract

We report an experimental investigation of the lifetime of dielectric elastomer actuators (DEAs) under constant DC actuation, with a characterization setup which allows the monitoring of strain and resistance over time for 6 DEAs in parallel. We show how the choice of the electrode influences the lifetime of silicone-based DEAs under constant DC actuation and under different environmental conditions. The DEAs consist of a 12 μm thick prestretched Elastosil 2030 silicone membrane sandwiched between 1 - 4 μm thick and 5 mm diameter circular electrodes. Three types of electrodes are used: 1) pad-printed carbon powder - PDMS composite, 2) inkjet-printed carbon black suspension, and 3) carbon black powder. The DEAs are operated under a constant DC electric field in controlled temperature and humidity, ranging from 30% RH at 20°C to 85% RH at 85°C. 6 DEAs were tested simultaneously for each experimental condition (electrode type, % RH, T). Operated at an electric field of 90 V/μm, at 85°C and at 85% RH, DEAs with pad-printed electrodes show more than 10x higher lifetimes than DEAs with inkjet-printed electrodes. However, no significant difference in lifetime is seen at dry conditions. When operating at electric fields chosen to have the same actuation strain for the different DEAs, those with dry carbon black electrodes show over 5x higher lifetimes compared to DEAs with pad-printed or inkjet-printed DEAs, owing to the lower operational electric field required (50 V/μm vs. 90 V/μm) to reach a given strain. At 85°C, increasing the humidity from 20% RH to 85% RH leads to a 40x to 400x decrease in lifetime for DEAs with pad-printed and with inkjet-printed DEAs.

Conference Presentation

Citation Download Citation

Fabio B. Albuquerque and Herbert Shea "Effect of electrode composition and patterning method on the lifetime of silicone-based dielectric elastomer actuators (DEA) under different environmental conditions", Proc. SPIE 11587, Electroactive Polymer Actuators and Devices (EAPAD) XXIII, 115871B (22 March 2021); https://doi.org/10.1117/12.2581071

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available