Paper
23 October 2018 A compliant cylinder fiber-optic accelerometer with self-mixing technique
Author Affiliations +
Abstract
A dynamic acceleration measurement system based on a high sensitivity compliant cylinder fiber optic probe and an all-fiber configuration Distributed Bragg Reflector (DBR) fiber laser with self-mixing technique is presented. The compliant cylinder fiber optic probe consists of a mass-block and an elastic cylinder twined with single mode fiber and can be regarded as being close to that of a simple mass spring system. Experimental results show that the signal to noise ratio (SNR) can achieve 50dB at 800 Hz under 1.5 mg acceleration stimulation, voltage sensitivity is 6.04 V/g and minimum detectable acceleration of the measuring system is 4.7μg/sqrt Hz at 800Hz. Moreover, the material of elastic cylinder is polyurethane (PU) which has better temperature stability and can be applied widely in the field of vibration measurements.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qiang Ge, Shili Li, Jianmin Cheng, Jiang Li, Gang Wang, Yu Liu, Xuqiang Wu, and Benli Yu "A compliant cylinder fiber-optic accelerometer with self-mixing technique", Proc. SPIE 10821, Advanced Sensor Systems and Applications VIII, 108210Z (23 October 2018); https://doi.org/10.1117/12.2502342
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber optics

Fiber lasers

Fiber optics tests

Calibration

Fiber optics sensors

Signal to noise ratio

Lutetium

Back to Top