DESIGN AND ANALYSIS OF BENDING MOTION IN SINGLE AND DUAL CHAMBER BELLOWS STRUCTURED SOFT ACTUATORS

Authors

  • Tariq Rehman Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • A. A. M. Faudzi Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Dyah Ekashanti Octorina Dewi Department of Clinical Science, Faculty of Biosciences and Medical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • K. Suzumori Department of Mechanical and Aerospace Engineering, Tokyo Institute of Technology, Ookayama, Meguro-ku, Tokyo, Japan
  • M. R. M. Razif Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • I. N. A. M. Nordin Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia

DOI:

https://doi.org/10.11113/jt.v78.9267

Keywords:

Pneumatic bending actuator, single chamber bellows actuator, dual chamber bellows actuator, finite element analysis

Abstract

As one of the most important characteristics of soft actuators, bending motion has been widely used in the field of soft robotics to perform different manipulation and tasks. In this study, we design silicone rubber material based soft actuators consisting of single and dual chambers, and a bellows structure. Several models of bellows soft actuators were designed, simulated and analyzed using finite element analysis (FEA) software MARC®, in order to understand the characteristics of bellows structured soft actuator with single and dual chambers and to optimize the performance of bending motion of bellows soft actuators. The results confirm that the bellows structured pneumatic soft actuator model 4 of single chamber and model 5 of dual chamber produces the best bending motion and bending angles.

References

M. F. A. ‘Athif, M.N. Ili Najaa Aimi, R. Nur Fatiha, M.R. M. Rusydi, D. Hirooka, S. Wakimoto, K. Suzumori. 2012. Application of New Braided Soft Actuator Design In Biomimetic Robot Locomotion. 15th International Conference on Climbing and Walking Robots, CLAWAR.

Suzumori, K., T. Hama, et al. 2006. New Pneumatic Rubber Actuators to assist Colonoscope Insertion. Proceedings IEEE International Conference on Robotics and Automation, ICRA. 1824–1829.

Onoe, H., K. Suzumori, and T. Kanda. 2007. Development of Tetra Chamber Actuator. IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS.

Onoe, H., K. Suzumori, and S. Wakimoto. 2008. Optimum design of Pneumatic Multi-Chamber Rubber Tube Actuator Generating Traveling Deformation Waves for Colonoscope Insertion. IEEE/ASME International Conference onAdvanced Intelligent Mechatronics, AIM.

Wakimoto, S. and K. Suzumori. 2010. Fabrication and Basic Experiments of Pneumatic Multi-Chamber Rubber Tube Actuator for Assisting Colonoscope Insertion. IEEE International Conference on Robotics and Automation, ICRA.

Ozaki, K., et al. 2011. Novel design of Rubber Tube Actuator Improving Mountability and drivability for Assisting Colonosocope Insertion. IEEE International Conference on Robotics and Automation, ICRA.

Surakusumah, R.F., et al. 2014. Development of a Half Sphere Bending Soft Actuator for Flexible Bronchoscope Movement. IEEE International Symposium on Robotics and Manufacturing Automation, ROMA.

Polygerinos, P., et al. 2013. Towards a soft Pneumatic Glove for Hand Rehabilitation. IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS.

Ogura, K., et al. 2008. Micro Pneumatic Curling Actuator - Nematode Actuator. IEEE International Conference on Robotics and Biomimetics, ROBIO.

Yoshioka, R., et al. 2014. Development of Pneumatic Rubber Actuator of 400 μm in Diameter Generating Bi-Directional Bending Motion. 2014 IEEE International Conference onRobotics and Biomimetics, ROBIO.

Lanying, Z.,et al. 2015. Pneumatic Balloon Actuator with Tunable Bending Points. IEEE International Conference on Micro Electro Mechanical Systems, MEMS.

Faudzi, A.A.M., et al. 2012. Development of Bending Soft Actuator with Different Braided Angles. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM.

Suzumori, K., et al. 2007. A Bending Pneumatic Rubber Actuator Realizing Soft-bodied Manta Swimming Robot. IEEE International Conference on Robotics and Automation.

Razif, M.R.M., et al. 2014. Two Chambers Soft Actuator Realizing Robotic Gymnotiform Swimmers Fin. IEEE International Conference on Robotics and Biomimetics, ROBIO.

Nordin, Ili Najaa Aimi Mohd, et al. 2014. Simulations of Two Patterns Fiber Weaves Reinforced in Rubber Actuator. Jurnal Teknologi 69(3):135-138.

Noritsugu, T., M. Takaiwa, et al. 2008. Power Assist Wear Driven with Pneumatic Rubber Artificial Muscles. International Conference on Mechatronics and Machine Vision in Practice.

Wakimoto, S., I. Kumagai, et al. 2009. Development of Large Intestine Endoscope Changing its Stiffness. IEEE International Conference on Robotics and Biommetics, ROBIO, 2320–2325.

Wakimoto, S., K. Ogura, K. Suzumori, and Y. Nishioka. 2009. MiniatureSoft Hand with Curling Rubber Pneumatic Actuators. IEEE International Conference on Robotics and Automation, ICRA, 556–561.

Downloads

Published

2016-06-28

How to Cite

DESIGN AND ANALYSIS OF BENDING MOTION IN SINGLE AND DUAL CHAMBER BELLOWS STRUCTURED SOFT ACTUATORS. (2016). Jurnal Teknologi, 78(6-13). https://doi.org/10.11113/jt.v78.9267