Issue 47, 2021

Effect of seed layer thickness on the Ta crystalline phase and spin Hall angle

Abstract

Heavy metal–ferromagnet bilayer structures have attracted great research interest for charge-to-spin interconversion. In this work, we investigated the effect of the permalloy (Py) seed layer on the tantalum (Ta) polycrystalline phase and its spin Hall angle. Interestingly, for the same deposition rates the crystalline phase of Ta deposited on the Py seed layer strongly depends on the thickness of the seed layer. We observed a phase transition from α-Ta to (α + β)-Ta while increasing the Py seed layer thickness. The observed phase transition is attributed to the strain at the interface between the Py and Ta layers. Ferromagnetic resonance-based spin pumping studies reveal that the spin-mixing conductance in the (α + β)-Ta is relatively higher as compared to the α-Ta. Spin Hall angles of α-Ta and (α + β)-Ta are obtained from the inverse spin Hall effect (ISHE) measurements. The spin Hall angle of (α + β)-Ta is estimated to be θSH = −0.15 ± 0.009 which is relatively higher than that of the α-Ta. Our systematic results connecting the phase of Ta with the seed layer and its effect on the efficiency of spin to charge conversion might resolve ambiguities across various literature and open up new functionalities based on the growth process for emerging spintronic devices.

Graphical abstract: Effect of seed layer thickness on the Ta crystalline phase and spin Hall angle

Supplementary files

Article information

Article type
Paper
Submitted
13 Sep 2021
Accepted
09 Nov 2021
First published
26 Nov 2021

Nanoscale, 2021,13, 19985-19992

Effect of seed layer thickness on the Ta crystalline phase and spin Hall angle

K. Sriram, J. Pala, B. Paikaray, A. Haldar and C. Murapaka, Nanoscale, 2021, 13, 19985 DOI: 10.1039/D1NR06007D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements