Issue 42, 2020, Issue in Progress

Facile synthesis of a BCN nanofiber and its ultrafast adsorption performance

Abstract

Boron carbonitride (BCN) nanofibers with rapid and efficient adsorption performance were prepared by electrospinning technology. TEM, XRD, XPS and N2 adsorption–desorption isotherms were performed to study the microstructure of the nanofibers. The results showed that the BCN fibers synthesized at 1000 °C (BCN-1000) have good crystallinity and high specific surface areas (403 m2 g−1). BCN-1000 nanofibers adsorb 70% of amino black 10B (AB-10B) within 10 minutes and reach adsorption equilibrium within 60 minutes. Compared with previous reports, it is found that the adsorption rate of BCN-1000 nanofibers to amino black (AB-10B) is much higher than that of other adsorbents. And BCN nanofibers exhibit a large adsorption capacity (625 mg g−1). In addition, the process of AB-10B adsorption on BCN nanofibers was systematically investigated, which was in accordance with the pseudo-second-order kinetics model and Langmuir isotherm model.

Graphical abstract: Facile synthesis of a BCN nanofiber and its ultrafast adsorption performance

Article information

Article type
Paper
Submitted
29 Feb 2020
Accepted
24 Jun 2020
First published
02 Jul 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 25200-25208

Facile synthesis of a BCN nanofiber and its ultrafast adsorption performance

J. Yu, T. Hu, C. Du, Y. Zhang, Z. Chu, Y. Li and J. Cao, RSC Adv., 2020, 10, 25200 DOI: 10.1039/D0RA01938K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements