Issue 45, 2017

Anisotropic electrical conductivity in polymer derived ceramics induced by graphene aerogels

Abstract

This article reports the fabrication of bulk polymer derived ceramics (PDCs) with anisotropic electrical properties attributed to embedded anisotropic reduced graphene oxide aerogels (rGOAs). The rGOAs function as a reinforcing frame to produce a bulk ceramic composite, and as a conductive network to improve the charge transport efficiency. 1 wt% embedded rGOAs increase the conductivity of PDC by more than eight orders of magnitude. The highly aligned graphene sheets also generate different electrical conductivity values in the longitudinal and transversal directions. The electrical conductivity along longitudinal direction is ten times higher than that along transversal direction. In addition, Raman spectroscopy and X-ray diffraction studies of PDCs with and without graphene indicate that graphene facilitates the transition of amorphous carbon to graphitic carbon in the PDCs. The SiCN/rGOA composites demonstrated high electrical conductivity at high temperature and good mechanical properties, leading to potential applications as electronics at high temperature.

Graphical abstract: Anisotropic electrical conductivity in polymer derived ceramics induced by graphene aerogels

Supplementary files

Article information

Article type
Paper
Submitted
23 Aug 2017
Accepted
26 Oct 2017
First published
27 Oct 2017

J. Mater. Chem. C, 2017,5, 11708-11716

Anisotropic electrical conductivity in polymer derived ceramics induced by graphene aerogels

C. Shen, J. E. Calderon, E. Barrios, M. Soliman, A. Khater, A. Jeyaranjan, L. Tetard, A. Gordon, S. Seal and L. Zhai, J. Mater. Chem. C, 2017, 5, 11708 DOI: 10.1039/C7TC03846A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements