Issue 85, 2015

Microstructure and properties of novel SPEEK/PVDF-g-PSSA blends for proton exchange membrane with improved compatibility

Abstract

Novel blend membranes of poly(vinylidene fluoride) grafted poly(styrene sulfonic acid) (PVDF-g-PSSA) with sulfonated poly(ether ether ketone) (SPEEK) were fabricated for direct methanol fuel cell applications. The PVDF-g-PSSA copolymer can be homogeneously dispersed in the SPEEK matrix with a unique hierarchical particle surface. All the SPEEK/PVDF-g-PSSA blend membranes exhibit better dimensional stability, lower methanol permeability, higher selectivity than commercial Nafion® 117 at room temperature. Notably, at the PVDF-g-PSSA content of 5 wt%, the blend membrane exhibits the best overall membrane performance, which is supposed to benefit from the improved compatibility and strong interactions between the PVDF-g-PSSA and SPEEK matrix. The thermal stability and the temperature dependence of water uptake, dimensional change and proton conductivity of the blend membranes are also investigated. This study provides a promising strategy for the design and fabrication of high performance polymer electrolyte membrane by rational control of microstructure and compatibility of the blend membrane.

Graphical abstract: Microstructure and properties of novel SPEEK/PVDF-g-PSSA blends for proton exchange membrane with improved compatibility

Supplementary files

Article information

Article type
Paper
Submitted
20 Jun 2015
Accepted
10 Aug 2015
First published
10 Aug 2015

RSC Adv., 2015,5, 69621-69628

Microstructure and properties of novel SPEEK/PVDF-g-PSSA blends for proton exchange membrane with improved compatibility

X. Liu, X. Meng, J. Wu, J. Huo, L. Cui and Q. Zhou, RSC Adv., 2015, 5, 69621 DOI: 10.1039/C5RA11894H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements