Antenna Azimuth Position Control System using PID Controller & State-Feedback Controller Approach

Aveen Uthman, Shahdan Sudin

Abstract


This paper analyzed two controllers with the view to improve the overall control of an antenna azimuth position. Frequency ranges were utilized for the PID controller in the system; while Ziegler-Nichols was used to tune the PID parameter gains. A state feedback controller was formulated from the state-space equation and pole-placements were adopted to ensure the model design complied with the specifications to meet transient response. MATLAB Simulink platform was used for the system simulation. The system response for both the two controllers were analyzed and compared to ascertain the best controller with best azimuth positioning for the antenna. It was observed that state-feedback controller provided the best azimuth positioning control with a little settling time, some value of overshoot and no steady-state error is detected.

Keywords


azimuth position control system response; MATLAB simulation; PID controller; pole placement; state-feedback controller; zeglior-tunung method

Full Text:

PDF


DOI: http://doi.org/10.11591/ijece.v8i3.pp1539-1550

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

International Journal of Electrical and Computer Engineering (IJECE)
p-ISSN 2088-8708, e-ISSN 2722-2578

This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).