Study on Clinching of Titanium Alloy

Lun Zhao; Xiao Cong He; Yi Lu

doi:10.4028/www.scientific.net/AMM.633-634.86

Paper Titles

Gas Sealing Performance Study of Metal W Shaped Seal Ring
p.68

Mechanical Property Comparison Analysis of Two Kinds of Shape Memory Alloy Patella Claws Based on Finite Element Method
p.74

Mechanics Analysis of Protective Casing and Splicing Sleeve
p.78

Research on the Mechanical Properties and Corrosion Resistance of Mg-RE and Mg-Zn-Cu Alloys
p.82

Study on Clinching of Titanium Alloy
p.86

The Electrochemical Behaviors of HSn70-1A Brass in Polluted Freshwater
p.90

The Red Electroluminescence of Iridium Complex at Different Concentrations and Host Materials
p.94

Influence of Heat Treatment on Microstructure and Mechanical Properties of Die-Cast AZ91D Alloy with RE Elements
p.98

Research of Anti-Extrusion Process for Cylinder of Spray-Formed Ultra-High Strength Aluminum Alloy
p.103

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 633-634Study on Clinching of Titanium Alloy

Study on Clinching of Titanium Alloy

Abstract:

Adopting experimental method to examine clinching is able to apply to the joining of similar titanium alloy in this study. Also, to use tensile-shear test to figure out mechanical properties of clinched joints to TA1-TA1 clinched joints and Al5052-Al5052 clinched joints. The results show that average load of Al5052-Al5052 clinched joints is largely lower than average load of TA1-TA1 clinched joints. Average load of TA1-TA1 is around 4427.58, equal to 3.55 times to Al5052-Al5052.The two types of fractured joints are all neck shear fracture of the upper sheets. Therefore, the strength of joints is dependant to the strength of the material. And average displacement of TA1-TA1 clinched joints is higher than that of Al5052-Al5052 clinched joints.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 633-634)

Pages:

86-89

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.633-634.86

Citation:

Cite this paper

Online since:

September 2014

Authors:

Lun Zhao, Xiao Cong He*, Yi Lu

Keywords:

Average Displacement, Average Load, Clinching, Titanium Alloy

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Chen Guolin，Wu Pengwei，Leng Wenjun, etc. The Development Prospect and Current Status of Titanium Alloys. Ship Science and Technology[J], 2009, 31(12): 110.

Google Scholar

[2] Zi Qun. Study of Progress and Current Application for Titanium Alloy. Progress of Titanium industry [J], 2008, 25（2）: 23.

Google Scholar

[3] Zhang Xiyan, Zhao Yongqing, Bai Chenguang. Titanium Alloy and Application[M]. Beijing: Chemical Industry Press, 2005, 3.

Google Scholar

[4] TOX Co. The Clinching of TOX Sheets[J]. Modern Components, 2006, 9: 70-71.

Google Scholar

[5] Mori K, Abe Y, Kato T. Mechanism of superiority of fatigue strength for aluminum alloy sheets joined by mechanical clinching and self-pierce riveting [J]. Journal of Materials Processing Technology, 2012, 212 (9): 1900-(1905).

DOI: 10.1016/j.jmatprotec.2012.04.017

Google Scholar

[6] He X. Recent Development in Finite Element Analysis of Clinched Joints [J]. International Journal of Advanced Manufacturing Technology, 2010, 48(5-8): 607-612.

DOI: 10.1007/s00170-009-2306-2

Google Scholar