Abstract
In the crashworthiness of automotive structures, the primary issues to the automotive industry are the overall economy and the weight of the material. To reduce the weight and improve the fuel economy, polymer composite materials have replaced more and more metal parts in vehicles. They have the added benefit of being able to dissipate large amounts of impact energy by progressive crushing. To identify and quantify the energy absorbing mechanisms in candidate automotive composite materials, test methodologies were developed for conducting progressive crush tests on composite plate specimens. The test method development and experimental set-up focused on isolating the damage modes associated with the frond formation that occurs in dynamic testing of composite tubes. Quasi-static progressive crush tests were performed to quantify the effects of specimen width, profile radius and profile constraint on the specific energy absorption and failure modes of composite plates manufactured from chopped carbon fiber (CCF) with an epoxy resin system using compression molding techniques. The carbon fiber was Toray T700 and the epoxy resin was YLA RS-35. It was demonstrated during testing that the use of a roller constraint directed the crushing process and the load deflection curves were similar to the progressive crushing of tubes. Modifications to the basic specimen geometry were required when testing material systems that have low axial stiffness to prevent a global buckling mode. The experimental data in conjunction with the test observations were used to develop analytical models for predicting the crashworthiness of automotive composite structures.
Similar content being viewed by others
Article PDF
References
D. Hull, Compos. Sci. Technol., 40, 377 (1991).
G. L. Farley, “Energy Absorption of Composite Material and Structures”, Proc. 43rd American Helicopter Society Annual Forum, St. Louis, MO, 1987, pp 613–627.
G. L. Farley, J. Compos. Mater., 20, 390 (1986).
G. L. Farley, J. Compos. Mater., 17, 267 (1983).
G. L. Farley, J. Compos. Mater., 20, 322 (1986).
G. L. Farley, in “Energy Absorption in Composite Materials for Crashworthy Structures”, Proc. of ICCM 6, F. L. Matthews, N. C. R. Buskell, J. M. Hodgkinson, and J. Mortan, Eds., Elsevier Science Publishers Limited, London, 1987, pp 3.57–3.66.
P. H. Thornton and P. J. Edwards, J. Compos. Mater., 16, 521 (1982).
D. Hull, ‘Axial Crushing of Fibre Reinforced Composite Tubes’ in “Structural Crashworthiness”, N. Jones and T. Weirzbicki, Eds., Butterworths, London, 1983, pp 118–135.
H. Hamada, S. Ramakrishna, Z. Maekawa, and M. Nakamura, Proc. 10th Annual ASM/ESD Advanced Composite Conference, Dearborn, MI, November 7–10, 1994, pp 511–522.
D. W. Schmuesser and L. E. Wickliffe, J. Eng. Mat. & Tech., 109, 72 (1987).
H. Hamada and S. Ramakrishna, J. Thermoplast. Compos. Mater., 9, 259 (1996).
G. L. Farley and R. M. Jones, J. Compos. Mater., 26, 78 (1992).
G. L. Farley, J. Compos. Mater., 26, 388 (1992).
P. H. Thornton, J. Compos. Mater., 13, 247 (1979).
C. H. Chiu, C. K. Lu, and C. M. Wu, J. Compos. Mater., 31, 2309 (1997).
C. H. Chiu, C. K. Lu, and C. M. Wu, ‘Energy Absorption of Three-Dimensional Braided Composite Tubes’, in “Proc. of ICCM 10”, B. C. Whistler, Ed., Woodhead Publishing Limited, 1995, pp 4.187–4.194.
S. Ramakrishna, H. Hamada, Z. Maekawa, and H. Sato, J. Thermoplast. Compos. Mater., 8, 323 (1995).
I. Y. Chang and J. K. Lees, J. Thermoplast. Compos. Mater., 1, 277 (1988).
I. Y. Chang, Compos. Sci. Technol., 24, 61 (1985).
H. Satoh, H. Hirakawa, Z. Maekawa, H. Hamada, M. Nakamura, and D. Hull, 38th International SAMPE Symposium, Science of Advanced Materials and Process Engineering Series, vol. 38, Anaheim, CA, May 10–13, 1993, pp 952–966.
H. Hamada, J. C. Coppola, D. Hull, Z. Maekawa, H. Sato, Composites, 23, 245 (1992).
G. L. Farley and R. M. Jones, “Energy Absorption Capability of Composite Tubes and Beams”, NASA TM-101634, AVSCOM TR-89-B-003, (1989).
D. Hull, ‘Energy Absorption of Composite Materials Under Crash Conditions’ in “Proc. of ICCM 4”, T. Hayashi, K. Kawata, and S. Umekawa, Eds., Japan Society for Composite Materials, Tokyo, 1982, pp 861–870.
J. P. Berry, Ph. D. Thesis in Metallurgy, University of Liverpool, 1984.
G. L. Farley, “Crash Energy Absorbing Composite Sub-floor Structure”, 27th SDM conference, San Antonio, TX, (May 1986). Also submitted for publication to The American Helicopter Society.
G. L. Farley and R. M. Jones, J. Compos. Mater., 26, 1741 (1992).
P. H. Thornton, J. J. Harwood, and P. Beardmore, Compos. Sci. Technol., 24, 275 (1985).
D. D. Dubey, J. A. Vizzini, J. Compos. Mater., 32, 158 (1998).
H. Hamada, S. Ramakrishna, Z. Maekawa, M. Nakamura, and T. Nishiwaki, Proc. 10th Annual ASM/ESD Advanced Composite Conference, Dearborn, MI., November 7–10, 1994, pp 523–534.
A. G. Mamalis, Y. B. Yuan, and G. L. Viegelahn, Int. J. Veh. Des., 13(5/6), 564 (1992).
A. H. Fairfull, Ph. D. Thesis in Materials Science, University of Liverpool, 1986.
A. H. Fairfull and D. Hull, ‘Effects of Specimen Dimensions on the Specific Energy Absorption of Fibre Composite Tubes’ in “Proc. of ICCM 6”, F. L. Matthews, N. C. R. Buskell, J. M. Hodgkinson, J. Morton, Eds., Elsevier Science Publishers Limited, London, 1987, pp 3.36–3.45.
G. L. Farley, ‘Energy Absorption Capability and Scalability of Square Cross Section Composite Tube Specimens, in “U.S. Army Research and Technology Activity–AVSCOM”, NASA-TM 89087, 1989, pp 1–17.
S. Ramakrishna and H. Hamada, Key Eng. Mat., 141–143, 585 (1998).
S. Hanagud, J. I. Craig, P. Sriram, and W. Zhou, J. Compos. Mater., 23, 448 (1989).
H. Hamada, S. Ramakrishna, Z. Maekawa, and H. Sato, J. Poly., J. Poly. & Poly. Comp.amp;amp; Poly. Comp., 3, 99 (1995).
S. Ramakrishna and D. Hull, Compos. Sci. Technol., 49, 349 (1993).
S. Ramakrishna, J. Reinf. Plast. Comp., 14, 1121 (1995).
P. Snowdon and D. Hull, Proc. Fiber Reinforced Composites Conference’84, Plastics and Rubber Institute, April 3–5, 1984, pp 5.1–5.10.
P. H. Thornton, W. H. Tao, and R. E. Robertson, Advanced Composite Materials: New Development and Applications Conference Proceedings, Detroit, MI., September 30–October 3, 1991, pp 489–496.
D. C. Bannerman and C. M. Kindervater, Proc. 4th International SAMPE European Chapter, Bordeaux, 1984, pp 155–167.
P. H. Thornton, J. Compos. Mater., 24, 594 (1990).
G. L. Farley, J. Compos. Mater., 25, 1314 (1991).
C. M. Kindervater, Presented at Natuional Specialists Meeting, Composite Structures of the American Helicopter Society, Philadelphia, P. A., March 23–25, 1983.
J. M. Starbuck, G. C. Jacob, and S. Simunovic, Presented at Future Car Congress, Crystal City, VA, April 2–6, 2000.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jacob, G., Starbuck, J., Fellers, J. et al. Energy Absorption in Chopped Carbon Fiber Epoxy Composites for Automotive Crashworthiness. Polym J 35, 560–567 (2003). https://doi.org/10.1295/polymj.35.560
Issue Date:
DOI: https://doi.org/10.1295/polymj.35.560