Abstract
The surface topography, tensile properties, and thermal properties of ramie fibers were investigated as reinforcement for fully biodegradable and environmental-friendly ‘green’ composites. SEM micrographs of a longitudinal and cross-sectional view of a single ramie fiber showed a fibrillar structure and rough surface with irregular cross-section, which is considered to provide good interfacial adhesion with polymer resin in composites. An average tensile strength, Young’s modulus, and fracture strain of ramie fibers were measured to be 627 MPa, 31.8 GPa, and 2.7 %, respectively. The specific tensile properties of the ramie fiber calculated per unit density were found to be comparable to those of E-glass fibers. Ramie fibers exhibited good thermal stability after aging up to 160°C with no decrease in tensile strength or Young’s modulus. However, at temperatures higher than 160°C the tensile strength decreased significantly and its fracture behavior was also affected. The moisture content of the ramie fiber was 9.9%. These properties make ramie fibers suitable as reinforcement for ‘green’ composites. Also, the green composites can be fabricated at temperatures up to 160°C without reducing the fiber properties.
Similar content being viewed by others
References
E. E. Sera, L. Robles-Austriaco, and R. P. Pama,J. Ferrocement,20, 109 (1990).
M. N. Cazaurang-Martinez, P. J. Herrera-Franco, P. I. Gonzalez-Chi, and M. Aguilar-Vega,J. Appl. Polym. Sci.,43, 749 (1991).
K. Joseph, S. Thomas, C. Pavithran, and M. Brahmakumar,J. Appl. Polym. Sci.,47, 1731 (1993).
S. Luo and A. N. Netravali,J. Mater. Sci.,34, 3709 (1999).
S. Luo and A. N. Netravali,Polym. Composite.,20, 367 (1999).
S. Luo and A. N. Netravali,J. Adhes. Sci. Technol.,15, 423 (2001).
P. Lodha and A. N. Netravali,J. Mater. Sci.,37, 3657 (2002).
P. Lodha and A. N. Netravali,Polym. Compos.,26, 647 (2005).
P. Lodha and A. N. Netravali,Composites Science and Technology,65, 1211 (2005).
B. V. Kokta, R. Chen, C. Daneault, and J. L. Valade,Polym. Compos.,4, 229 (1983).
C. Pavithran, P. S. Mukjerjee, M. Brahmakumar, and A. D. Damodaran,J. Mater. Sci.,26, 455 (1991).
M. Wollerdorfer and H. Bader,Industrial Crops and Products,8, 105 (1998).
A. K. Mohanty and M. Misra,Polym-Plast. Technol. Eng.,34, 729 (1995).
D. N. Saheb and J. P. Jog,Adv. Polym. Tech.,18, 351 (1999).
J. George, M. S. Sreekala, and S. Thomas,Polym. Eng. Sci.,41, 1471 (2001).
R. T. Woodhams, G. Thomas, and D. K. Rodgers,Polym. Eng. Sci.,24, 1166 (1984).
F. Shafizadeh, “The Chemistry of Solid Wood” (R. M. Rowell ed.), pp.489–529, American Chemical Society, Washington, 1984.
A. K. Mohanty, M. Misra, and G. Hinrichsen,Macromol. Mater. Eng.,276, 1 (2000).
M. K. Sridhar, G. Basavarajjappa, S. S. Kasturi, and N. Balsubramanian,Indian J. Text. Res.,7, 87 (1982).
C. Gonzalez and G. E. Mayers,Int. J. Polym. Mater.,23, 67 (1993).
A. K. Bledzki, S. Reihmane, and J. Gassan,J. Appl. Polym. Sci.,59, 1329 (1996).
T. T. Le Thi, H. Gauthier, R. Gauthier, B. Chabert, J. Guillet, B. V. Luong, and V. T. Nguygen,J. Macromol. Sci. Pure Appl. Chem.,33, 1997 (1996).
R. Gauthier, C. Joly, A. C. Coupas, H. Gauthier, and M. Escoubes,Polym. Compos.,19, 287 (1998).
F. H. M. M. Costa and J. R. M. D’Almedia,Polym-Plast. Technol. Eng.,38, 1081 (1999).
F. R. Al-Siddique, A. U. Khan, and R. A. Sheikh,World Textile Abstr.,No. 4196, (1984).
E. T. N. Bisanda and M. P. Ansell,J. Mater. Sci.,27, 1690 (1992).
A. Bismarck, A. K. Mohanty, I. Aranberri-Askargorta, S. Czapla, M. Misra, G. Hinrichsen, and J. Springer,Green Chemistry,3, 100 (2001).
D. Fengel and X. Shao,Wood Sci. and Technol.,18, 103 (1984).
S. Li, B. Zhou, Q. Zeng, and X. Bao,Composites,25, 225 (1994).
W. Weibull,Ing. Vetenskaps. Akad. Handl.,151, 153 (1939).
H. F. Wu and A. N. Netravali,J. Mater. Sci.,27, 3318 (1992).
S. Nam and A. N. Netravali,J. Adhes. Sci. Technol.,18, 1063 (2004).
B. C. Barkakaty,J. Appl. Polym. Sci.,20, 2921 (1971).
A. K. Bledzki and J. Gassan,J. Prog. Polym. Sci.,24, 221 (1999).
M. Lewin and E. M. Pearce Eds., “Handbook of Fiber Chemistry”, Marcel Dekker, New York, 1998.
S. Ochi, H. Takagi, R. Takura, and R. Niki,Jsms. Composites,30, 131 (2001).
A. K. Bledzki, S. Reihmane, and J. Gassan, “Handbook of Engineering Polymeric Materials” (N. P. Cheremisinoff ed.), pp.787–810, Marcel Dekker, New York, 1998.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nam, S., Netravali, A.N. Green composites. I. physical properties of ramie fibers for environment-friendly green composites. Fibers Polym 7, 372–379 (2006). https://doi.org/10.1007/BF02875769
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02875769