Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter November 27, 2018

Shareconomy in der Fertigungsindustrie

Auswirkungen auf die Fertigungsindustrie durch das Paradigma des Teilens

Shareconomy in the Manufacturing Industry
  • Carsten Ellwein , Alexander Schmidt , Oliver Riedel and Armin Lechler

Kurzfassung

Der Trend hin zu einer Ökonomie des Teilens ist in vielen Branchen zu beobachten. Auch in der Fertigungsindustrie ist dieser Trend sichtbar. Über Cloud-Manufacturing-Plattformen werden Produktionsressourcen als Dienstleistung angeboten. Geht man davon aus, dass dieser Trend sich fortsetzt, dann steht in naher Zukunft ein großes Produk-tionsnetz für den Endnutzer zur Verfügung. Im folgenden Beitrag werden mögliche Auswirkungen dieser Entwicklung anhand von drei Szenarien genauer betrachtet.

Abstract

Impact on the manufacturing industry by the sharing paradigm. The trend towards a sharing economy can be seen in a lot of domains. This trend is also visible in the domain of manufacturing. Production ressources are made available as a service via cloud manufacturing platforms. Assuming that this trend will continue, a huge pool of production ressources will be available in the future for the end customer. In the following article the impact of this development will be discussed by looking at three scenarios.


Carsten Ellwein, M. Sc., geb. 1989, studierte Software Engineering and Management an der Hochschule Heilbronn. Seit 2016 arbeitet er am Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen (ISW) und leitet seit 2018 die Gruppe Software- und Engineeringmethoden.

Dipl.-Ing. Alexander Schmidt studierte Technische Kybernetik an der Universität Stuttgart. Seit 2016 ist er am Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen (ISW) der Universität Stuttgart.

Prof. Dr.-Ing. Oliver Riedel studierte Technische Kybernetik an der TU Stuttgart und promovierte dort an der Fakultät der Konstruktions- und Fertigungstechnik. Seit über 20 Jahren beschäftigt er sich mit den Grundlagen und der praktischen Anwendung von Methoden zur Virtuellen Absicherung in der Produktentwicklung und der Produktion. Er leitete in dieser Zeit zahlreiche Projekte für internationale Großunternehmen der Automobilindustrie und in der Energiewirtschaft zur Einführung virtueller Methoden. Nach seiner Tätigkeit am Fraunhofer-Institut für Arbeitswirtschaft und Organisation (IAO) war er bei der CENIT AG Systemhaus und der SiliconGraphics Inc. im Bereich Professional Services für das Themenfeld Virtuelle Produktentstehung in leitender Funktion tätig. Danach war Prof. Riedel bei der AUDI AG für die Prozessintegration und das Informations-Management im Produktprozess verantwortlich. 2010 wechselte er als Leiter Informationstechnologie und Prozessintegration Produktprozess im VW Konzern. Ab 2012 war er bei der AUDI AG verantwortlich für die Steuerung der Planungsprozesse und die Koordination produktionsrelevanter IT. Seit November 2016 ist Prof. Riedel Leiter des Instituts für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen (ISW) an der Universität Stuttgart, Inhaber des Lehrstuhls Produktionstechnische Informationstechnologien, und Leiter des Fraunhofer Instituts für Arbeitswirtschaft und Organisation (IAO).

Dr.-Ing. Armin Lechler studierte Technische Kybernetik an der Universität Stuttgart und promovierte im Jahr 2011. Seit 2011 ist er geschäftsführender Oberingenieur und seit 2015 stellvertretender Institutsleiter am Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen (ISW) der Universität Stuttgart.


Literatur

Ellwein, C.; Riedel, O.; Meyer, O.; Schel, D.: Rent'n'Produce: A Secure Cloud Manufacturing Platform for Small and Medium Enterprises. In: Conference Proceedings ICE/IEEE ITMC 2018. Stuttgart, Germany2018, S. 882887 DOI: 10.1109/ICE.2018.843633210.1109/ICE.2018.8436332Search in Google Scholar

Lu, Y.; Xu, X.; Xu, J.: Development of a Hybrid Manufacturing Cloud. Journal of Manufacturing Systems33 (2014) 4, S. 55156610.1016/j.jmsy.2014.05.003Search in Google Scholar

Wu, D.; Greer, M. J.; Rosen, D. W.; Schaefer, D.: Cloud Manufacturing. Strategic vision and State-of-the-Art. Journal of Manufacturing Systems32 (2013) 4, S. 56457910.1016/j.jmsy.2013.04.008Search in Google Scholar

Rauschecker, U.; Stöhr, M.; Schel, D.: Requirements and Concept for a Manufacturing Service Management and Execution Platform for Customizable Products. Transactions of the North American Manufacturing Research Institution of SME (Vol. 41), 2013. American Society of Mechanical Engineers201310.1115/MSEC2013-1021Search in Google Scholar

Xu, X.: From Cloud Computing to Cloud Manufacturing. Robotics and Computer-Integrated Manufacturing28 (2012) 1, S. 758610.1016/j.rcim.2011.07.002Search in Google Scholar

Li, X.; Yin, C.; Liu, F.; Zhao, X.: An Optimal Selection Method of Manufacturing Resources in Cloud Environment. In: Zhang, L.; Song, X.; Wu, Y. (Hrsg.): Theory, Methodology, Tools and Applications for Modeling and Simulation of Complex Systems – Communications in Computer and Information Science. Springer-Verlag, Singapore2016, S. 495610.1007/978-981-10-2669-0_6Search in Google Scholar

Esposito, C.; Castiglion, A.; Martini, B.; Choo, K-K. R.: Cloud Manufacturing: Security, Privacy, and Forensic Concerns. IEEE Cloud Computing3 (2016) 4, S. 162210.1051/mfreview/2016003Search in Google Scholar

Eastwood, M. A.: Implementing Mass Customization. Computers in Industry30 (1996) 3, S. 17117410.1016/0166-3615(96)00010-3Search in Google Scholar

Joneja, A.; Lee, N. K. S.: Automated Configuration of Parametric Feeding Tools for Mass Customization. Computers & Industrial Engineering35 (1998) 3–4, S. 46346610.1016/S0360-8352(98)00134-XSearch in Google Scholar

Da Silveira, G.; Borenstein, D.; Fogliatto, F. S.: Mass Customization: Literature Review and Research Directions. International Journal of Production Economics72 (2001) 1, S. 11310.1016/S0925-5273(00)00079-7Search in Google Scholar

Kotha, S.: Mass Customization: Implementing the Emerging Paradigm for Competitive Advantage. Strategic Management Journal16 (1995) S1, S. 214210.1002/smj.4250160916Search in Google Scholar

Lampel, J.; Mintzberg, H.: Customizing Customization. Sloan Management Review38 (1996) 1, S. 2130Search in Google Scholar

Botsman, R.: The Sharing Economy Lacks a Shared Definition. Fast Company Nov. 21, 2013. Online unter https://www.fastcompany.com/3022028/the-sharing-economy-lacks-a-shared-definitionSearch in Google Scholar

Stephany, A.: The Business of Sharing: Making it in the New Sharing Economy. Springer-Verlag, Berlin, Heidelberg201510.1057/9781137376183Search in Google Scholar

Moeller, S.; Wittkowski, K.: The Burdens of Ownership: Reasons for Preferring Renting. Managing Service Quality: An International Journal20 (2010) 2, S. 17619110.1108/09604521011027598Search in Google Scholar

Zervas, G.; Proserpio, D.; Byers, J. W.: The Rise of the Sharing Economy: Estimating the Impact of Airbnb on the Hotel Industry. Journal of Marketing Research54 (2017) 5, S. 68770510.1509/jmr.15.0204Search in Google Scholar

Hamari, J.; Sjöklint, M.; Ukkonen, A.: The Sharing Economy: Why People Participate in Collaborative Consumption. Journal of the Association for Information Science and Technology67 (2016) 9, S. 2047205910.1002/asi.23552Search in Google Scholar

Hawlitschek, F.; Teubner, T.; Gimpel, H.: Understanding the Sharing Economy – Drivers and Impediments for Participation in Peer-to-Peer Rental. 2016 49th Hawaii International Conference on System Sciences (HICSS). IEEE 2016–2016, S. 47824791 DOI: 10.1109/HICSS.2016.59310.1109/HICSS.2016.593Search in Google Scholar

Lamberton, C. P.; Rose, R. L.: When is Ours Better than Mine? A Framework for Understanding and Altering Participation in Commercial Sharing Systems. Journal of Marketing76 (2012) 4, S. 10912510.1509/jm.10.0368Search in Google Scholar

Ritzer, G.; Jurgenson, N.: Production, Consumption, Prosumption. Journal of Consumer Culture10 (2010) 1, S. 133610.1177/1469540509354673Search in Google Scholar

Online erschienen: 2018-11-27
Erschienen im Druck: 2018-11-28

© 2018, Carl Hanser Verlag, München

Downloaded on 24.4.2024 from https://www.degruyter.com/document/doi/10.3139/104.112010/html
Scroll to top button