Abstract

The electromagnetic analysis of a special class of 3D dielectric lens antennas is described in detail. This new class of lens antennas has a geometrical shape defined by the three-dimensional extension of Gielis’ formula. The analytical description of the lens shape allows the development of a dedicated semianalytical hybrid modeling approach based on geometrical tube tracing and physical optic. In order to increase the accuracy of the model, the multiple reflections occurring within the lens are also taken into account.

1. Introduction

During the last years, lens antennas have attracted the attention of various researchers and companies because of their potential use in several application fields such as high frequency wireless communication systems [1, 2], millimeter wave imaging [3], space [4], smart antennas [5], radio-astronomy [6], and radar systems [1]. In particular, in [1] a flat-top radiation pattern at 60 GHz is achieved by considering a 2D arbitrary shape lens antenna close in two metal half disks useful for high speed Wi-Fi 802.11ad devices. Another application of such class of antennas is illustrated in [3] where the authors presented a lens-coupled patch antenna array for imaging applications. This architecture consists of a two-dimensional array featuring a monolithic microwave integrated circuit (MMIC) front-end. In [1] the authors presented a fully polarimetric integrated monopulse receiver working in W-band frequency range. The proposed structure is composed by 2 × 2 array of slot-ring antennas covered by a hemispherical dielectric lens.

Lens antennas can be easily integrated in electronic circuits thanks to the relevant mechanical and thermal stability combined with the possibility of shaping the radiated beam by changing the lens geometry. During the last years, many research activities have been devoted to the development of 3D dielectric lenses characterized by canonical or axial-symmetrical geometry [7, 8] and only a few scientific studies have been dedicated to the analysis of more complex geometries [911]. In particular, in [10] the authors present a compact lens antenna with arbitrary shape working in millimeter wave frequency band, the design being carried out while neglecting the internal reflections occurring within the lens. However, in order to enhance the accuracy of the theoretical model based on geometrical optic (GO), it is essential to consider the effects of the internal reflections especially when high values of electric permittivity have to be used. To this end, in [12, 13] an accurate mathematical model is illustrated implementing the effects of the second-order internal reflections for canonical lens geometry.

The aim of this work is to present, in detail, a semianalytical model to design a new class of shaped dielectric lens antennas whose geometry is described by Gielis’ superformula [14, 15]. The developed mathematical model is based on the tube tracing approximation [16]. The electromagnetic field inside the lens is evaluated by using the GO approximation and considering the effect of the internal reflections. In this way, an improvement of the numerical accuracy can be obtained. Moreover, the evaluation of the electromagnetic field radiated from the lens has been carried out applying the physical optics (PO) approximation. In particular, according to the equivalence principle, the radiation outgoing the lens is evaluated by the radiation of the equivalent electric and magnetic currents on the lens surface. The current distribution is calculated by making use of the Fresnel transmission coefficient on the lens surface in accordance with the GO procedure.

Thanks to Gielis’ formulation it is possible to generate a wide range of 3D shapes in a simple and analytical way by changing a reduced number of parameters. The use of this formulation allows, also, an easy description of the geometrical characteristic of the antenna in terms of lens volume, area, curvature radius, and aspect ratio. Moreover, the analytical representation of the lens shape provides a number of benefits pertaining to the evaluation of the main physical quantities involved in the electromagnetic propagation equations. In this way, a reduced computation effort is required and more accurate results can be obtained.

2. Mathematical Model

The geometrical structure considered in the proposed electromagnetic model consists of a dielectric lens antenna placed on a perfectly electric conductor (PEC) circular plate having radius (see Figure 1).

The metal plate, acts as a ground plane and mechanical support of the radiating structure while reducing the backscattered radiation level. The lens is illuminated by the electromagnetic field emitted by a primary radio source such as open ended waveguide, patch antenna, horn antenna, or a coaxial probe integrated in the metal plate. The tube tracing approach based on the GO approximation is used to model the electromagnetic propagation inside the homogeneous dielectric lens. This approximation, allows a significant simplification of the mathematical model since it makes it possible to reduce the solution of Maxwell’s equations to a geometrical problem. As a result, the adoption of such method allows the simulation of electrically large structures with a lower computational effort in comparison to full-wave numerical methods such as Finite-Difference-Time-Domain (FDTD) and Finite-Element-Method (FEM).

The applicability condition of such method requires that the lens surface is placed within the far field zone of the feeding source and that the geometrical shape of the lens has a curvature radius larger than the operating wavelength. In this way, the travelling electromagnetic wave can be approximated by a set of tubes propagating over a rectilinear path inside the lens. Each tube has a triangular cross section with given surface area and is defined by three rays departing from each of the triangle vertices. The reflected and transmitted ray tubes are determined by using GO principles. As a result, the propagation path determines a change of the triangle area that leads a variation of the electromagnetic field amplitude in accordance with the power conservation law. In Figure 2, the geometrical change of the tube during the propagation inside the lens is illustrated. In particular, the surface area variation from to is given by triangle vertices intersection with the lens surface in points , , and .

The surface area of each tube is evaluated by considering the overlap between the triangular surface, with vertices , , and , and the elements of the tessellation of the lens surface. The amplitude of the electromagnetic field inside the tube surface is evaluated by using the Inverse Distance Weighting (IDW) algorithm. In particular, considering point inside of the triangle on the lens surface, the electric field amplitude is given bywhere and denote the area of the triangular section of the tube on the lens surface referring to th and th reflection order, respectively. However, in order to account for the changes of the tube cross section surface and to enforce the energy conservation law, the correction coefficient is introduced. In (1), , , and denote the vertices of the surface intersected by the tube on the lens surface corresponding to th reflection order. The coefficients , , and are the inverse of the Euclidean distance between point and points , , and , respectively.

According to the GO approach, the electric field transmitted outside the lens due to the direct ray and the internal reflections occurring inside the lens is given by the following equation:where the transmitted field outside the lens due to the th order internal reflection is In (4) is the unit vector normal to the lens surface, is the transmitted unit wave vector due to the th internal reflection with , where is the refractive index of the external medium, and is the free space wavelength. The orthogonal and parallel components of the transmitted electric field are determined by multiplying the orthogonal and parallel components of the incident electric field in such point by the proper Fresnel transmission coefficient. The evaluation of the incident components of the electric field is carried out by means of the following equations:where is the incident unit wave vector due to th internal reflection with , where is the refractive index of the homogeneous dielectric material forming the lens.

In case of direct tube, , the incident field at point is calculated using the far field pattern of the source and instead, for , is derived from ()th reflected wave contribution aswhere is the path length between observation point and point , where the reflection takes place. The reflected field appearing in (7) is given by the following equationwhere parallel and orthogonal electric field components of ()th reflected wave are obtained by multiplying the corresponding components with the Fresnel reflection coefficient. term is the reflected unit vector referring to ()th internal reflection at point .

In order to evaluate the transmitted and reflected unit wave vector, Snell’s law at the interface between the dielectric lens and the outside medium has to be considered. In particular, the transmission and reflection phenomena are modeled by the following relations:where the transmitted unit wave vector , the reflected unit wave vector , the tangential unit vector , and the normal unit vector to the lens surface are given bywhere the normal unit vector and tangential unit vector to the lens surface in spherical coordinates are introduced. The terms and denote the transmitted and incident angle formed by the wave propagation vector and the normal unit vector to the surface in a given point, respectively:Once the transmitted and incident angles are computed, the Fresnel coefficients for the transmitted wave component can be evaluated as and the reflected component of the electric field isVector appearing in (13) is the radius vector describing the lens surface defined by Gielis’ superformula as follows [17, 18]:withwhere , , , , and , , , are real-valued parameters selected in such a way that the surface of the lens is actually closed and characterized, at any point, by curvature radius larger than the working wavelength in accordance with the GO approximation. The parameters and denote real-valued parameters appearing in Gielis’ formula, whereas the spherical angles and are obtained by means of the following relations:The derivatives of the radius vector appearing in (13) are given bywhereAccording to Gielis’ description of the lens surface, the derivatives of with respect to appearing in (21) can be evaluated as follows:withwhere denotes the Heaviside function.

The derivative of with respect to appearing in (22) can be evaluated as follows:whereOnce the contribution of all internal reflections has been evaluated by the GO method, the equivalent electric and magnetic current densities excited along the surface of the lens can be easily determined. According to the PO approximation, the electromagnetic field radiated in the spatial domain outside the lens at the general observation point can be computed by the following integral expression:where is the vector pointing from point on the lens surface and observation point , is the characteristic impedance of the vacuum, is the distance vector between the origin of the coordinate system and observation point , and is the unit vector corresponding to . In such way, the directivity of the antenna can be obtained by the following expression:where is the total electromagnetic power radiated by the lens.

3. Numerical Results

Gielis’ formulation allows the design of the proper lens shape by changing a few equation parameters. In this way, it is possible to analytically define the lens geometry useful for meeting size constraints due to the packaging, roundness, aspect ratio, or any sort of shape-related requirement. Furthermore, the electromagnetic radiation properties can be tuned by changing the lens parameters in order to synthesize a desired radiation pattern. Moreover, Gielis’ superformula is useful for defining analytically all the physical quantities involved in the electromagnetic problem. This in turn is beneficial for enhancing the accuracy of the results and, at the same time, reducing the computational cost of the analysis in comparison to a brute-force numerical approach.

The developed modeling technique is adopted to design a particular lens antenna showing a flat-top radiating pattern at frequency  GHz. This type of antenna could be integrated in communication systems covering a wide area. The proposed lens (#LA1) is made out of a dielectric material with refractive index equal to , having a minimum radius of  mm and described by the following parameters of Gielis’ superformula: , , , , and . The selected Gielis’ parameters ensure a curvature radius of the lens larger than the operating wavelength in all the points along the lens surface, in accordance with the applicability restrictions of the GO approximation. The lens is placed on a metal disk plate with radius  mm and fed by an open ended circular waveguide with diameter  mm, filled up by the same dielectric material forming the lens and positioned at center of such metallic plate. The numerical simulation has been performed considering a lens surface tessellation composed by 160 × 160 elements and internal reflections. Figure 3 shows the equivalent electric current densities distribution on the lens surface considering the internal reflection contribution.

Figure 4 illustrates (a) the radiation solids (far field pattern) and (b) the polar sections generated by the densities current pattern illustrated in Figure 3. It is worth noting that the antenna main lobe is characterized by an angular aperture at −3 dB of about 100 degrees with a peak directivity value of about 13 dBi.

Another numerical example relevant to the design of a lens antenna characterized by a triple radiation beam pattern at frequency  GHz is here reported. This type of antenna could be adopted in communication systems implementing a spatial-division multiplexing useful for increasing the channel capacity where the position of the receiver is known. In this case, the proposed lens (#LA2) is made out of a dielectric material with refractive index equal to , having a minimum radius of  mm and described by the following Gielis’ parameters: , , , , and (). Also in this case, the selected Gielis’ parameters ensure a minimum curvature radius of the lens surface that satisfies the applicability conditions of the GO approximation. A metal disk plate with radius  mm is also considered and the feeding source consists of an open ended circular waveguide having diameter  mm and filled up by the same dielectric material forming the lens. Also, in this case, the lens surface tessellation is composed by 160 × 160 elements and internal reflections have been taken into account. In Figure 5 the distribution of the equivalent electric current densities on the lens surface is shown. The internal reflections are properly taken into account.

Figure 6 shows (a) the radiation solids and ((b), (c)) polar sections, generated by the current density distribution illustrated in Figure 5. It is possible to observe three main lobes having an angular aperture at −3 dB of about 70 degrees pointing in three different directions , , and with a directivity of about 11 dBi and an elevation angle of .

Both the illustrated lens antenna structures feature specific properties in terms of radiation pattern that can be beneficial for the newly introduced Wi-Fi 802.11ad communication protocol working at frequency  GHz. Moreover, the obtained numerical results confirm the feasibility of the proposed mathematical model to study the special class of lens antennas defined by Gielis’ superformula.

4. Model Validation

In order to validate the developed modeling approach, a comparison with a commercially available full-wave electromagnetic solver CST Microwave Studio has been carried out. Figures 7 and 8 show the normalized directivity of the lens antennas #LA1 and #LA2, respectively, as computed by the developed GO/PO asymptotic approach and the commercial software. It is worthwhile to note that, within the angular width of the main lobe (antenna beam width or half-power beam width, more important for antenna design), a closer agreement between the full-wave and GO-PO numerical results has been obtained. Outside such angular region (less important for antenna design), an accuracy decrease of the GO-PO results can be observed. This occurrence, can be explained taking into account that the source field used in GO-PO approach is slightly different from that resulting from the full-wave method. In fact, in GO-PO approach the incident electromagnetic field on the lens surface corresponds to the far field pattern from a circular aperture on an infinite metallic plate. Instead, in the full-wave method the calculation of the incident electromagnetic field takes into account the finite size of the metallic plate. However, the full-wave analysis requires more computational resources in terms of memory occupation and simulation time. As a matter of fact, using a workstation with dual Intel Xeon E5645 processor, frequency of 2.4 GHz, the computational time and memory allocation required by the full-wave solver are about 15 hr and 22 GBytes, respectively, for lens #LA1 and about 10 hr and 15 GBytes, respectively, for lens #LA2. On the other hand, the developed GO-PO procedure is characterized by a computational time and memory allocation of about 3 hr and 2.5 GBytes, on the same workstation.

5. Conclusion

A novel mathematical procedure based on GO/PO tube tracing approach for modeling the electromagnetic propagation inside the lens antenna has been illustrated. The proposed model is applied to a special class of lens antennas having the three-dimensional shape defined by Gielis’ superformula. The analytical expression of the lens surface reduces the drawbacks due to various numerical approximations while ensuring more accurate results. The applicability of the proposed model could be extended to design complex shaped lens antennas for a wide range of applications covering both the microwave and optical frequency band. A proper selection of Gielis’ shape allows the performance improvement of the antenna in terms of directivity, multibeam radiating shape, beam-steering angle, beam stability, wide beam angle, and radiating efficiency.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.