Abstract
Magnetization is the key to inspection of a tank floor via the magnetic-flux-leakage (MFL) technique. In order to optimize the magnetic circuit of the MFL detector and obtain the best detection effects, the influences of the magnet size on the floor magnetization condition, the gap magnetic flux density, and the magnetic force were studied with the help of the finite element method (FEM) and the effects of some other parameters, such as the magnet pole spacing and pole-piece thickness, on the signal-to-noise ratio were analyzed. The simulation results indicate that variation of the magnet width affects the magnetization much more than variation of the magnet thickness and that the detector can reach a trade-off between the magnetization effects and the driving force when the magnet is about 30 mm thick and 40 mm wide. On condition that the floor has reached its magnetizing saturation, an increase in the magnet-pole spacing and the pole-piece thickness can improve the testing sensitivity and the signal-to-noise ratio.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Porter, P.C., Use of Magnetic Flux Leakage for the Inspection of Pipelines and Storage Tanks, Nondestructive Evaluation of Aging Utilities, Oakland, California (United States), Reuter, W.O., Ed., SPIE, vol. 2454, pp. 172–184.
Da-wei, Y. and Bin-shi, X., Metal Magnetic Memory Testing for Early Damage Assessment in Ferromagnetic Materials, J. Cent. South Univ. Technol., 2005, vol. 12,s. 2, pp. 107–111.
Jansen, H.J.M., van de Camp, P.B.J., and Geerdink, M., Magnetization as a Key Parameter of Magnetic-Flux Leakage Pigs for Pipeline Inspection, Insight, 1994, no. 36 (9), pp. 672–677.
Takagi, T., Uchimoto, T., and Nagaya, Y., Design of Eddy Current Camera for Nondestructive Testing, SICE Annual Conference in Fukui, August, 2003, Fukui Univ., Japan, 2003, pp. 1711–1714.
Brader, B., Magnetic Leakage Field Calculation by the Finite-Difference Method, NDTE Int., 1985, vol. 18, pp. 353–357.
Altschuler, E. and Pignotti, A., Nonlinear Model of Flow Detection in Steel Pipes by Magnetic-Flux Leakage, NDTE Int., 1995, vol. 28, no. 1, pp. 35–40.
Lukyanets, S. and Narskii, A., Calculation of Magnetic-Leakage Field from a Surface Defect in a Linear Ferromagnetic Material, NDTE Int., 2003, vol. 36, no. 1, pp. 51–55.
Atherton, D.L., Finite-Element Calculations and Computer Measurements of Magnetic-Flux Leakage Patterns for Pits, British J. NDT, 1988, vol. 30, pp. 159–161.
Li Luming, Zheng Peng and Huang Songling, Effects of Surface Crack Width on Y Components of Magnetic-Flux Leakage Field, J. Tsinghua Univ., 1999, vol. 39, no. 2, pp. 43–45.
Liu, Z., Kang, Y., and Yang, S., Study on Local Magnetization of Magnetic-Flux Leakage Testing for Storage Tank Floors, Insight, 2001, vol. 45, no. 5, pp. 328–331.
Katoh, M. and Ishio, K., FEM Study on the Influence of Air Gap and Specimen Thickness on the Detectability of Flaws in the Yoke Methods, NDTE Int., 2000, vol. 33, no. 6, pp. 333–339.
Author information
Authors and Affiliations
Corresponding author
Additional information
The text was submitted by the authors in English.
Rights and permissions
About this article
Cite this article
Song, Xc., Huang, Sl. & Zhao, W. Optimization of the magnetic circuit in the MFL inspection system for storage-tank floors. Russ J Nondestruct Test 43, 326–331 (2007). https://doi.org/10.1134/S1061830907050063
Received:
Issue Date:
DOI: https://doi.org/10.1134/S1061830907050063