Abstract
Cyber-physical systems (CPS) have gained an increasing attention recently for their immense potential towards the next generation smart systems that integrate cyber technology into the physical processes. However, CPS did not initiate either smart factories or smart manufacturing, and vice versa. Historically, the smart factory was initially studied with the introduction of the Internet of Things (IoT) in manufacturing, and later became a key part of Industry 4.0. Also emerging are other related models such as cloud manufacturing, social manufacturing and proactive manufacturing with the introduction of cloud computing (broadly, the Internet of Services, IoS), social networking (broadly, the Internet of People, IoP) and big data (broadly, the Internet of Content and Knowledge, IoCK), respectively. At present, there is a lack of a systemic and comprehensive study on the linkages and relations between these terms. Therefore, this study first presents a comprehensive survey and analysis of the CPS treated as a combination of the IoT and the IoS. Then, the paper addresses CPS-based smart manufacturing as an eight tuple of CPS,IoT, IoS and IoCK as elements. Further, the paper extends the eight-tuple CPS-based manufacturing to social-CPS (SCPS)-based manufacturing, termed wisdom manufacturing, which forms a nine tuple with the addition of one more element, the IoP and which is based on the SCPS instead of CPS. Both architectures and characteristics for smart and wisdom manufacturing are addressed. As such, these terms’ linkages are established and relations are clarified with a special discussion. This study thus contributes as a theoretical basis and as a comprehensive framework for emerging manufacturing integration.
Similar content being viewed by others
References
Araujo, J., Mazo, M., Anta, A., Tabuada, P., & Johansson, K. H. (2014). System architectures, protocols and algorithms for aperiodic wireless control systems. IEEE Transactions on Industrial Informatics, 10(1), 175–184.
Atzori, L., Iera, A., & Morabito, G. (2010). The internet of things: A survey. Computer Networks, 54(15), 2787–2805.
Bi, Z. M., & Kang, B. (2010). Enhancement of adaptability of parallel kinematic machines with an adjustable platform. Journal of Manufacturing Science and Engineering, 132(6), 061016.
Bi, Z., Xu, L. D., & Wang, C. (2014). Internet of things for enterprise systems of modern manufacturing. IEEE Transactions on Industrial Informatics, 10(2), 1537–1546. https://doi.org/10.1109/tii.2014.2300338.
Bogdan, P., & Marculescu, R. (2011). Cyber physical systems: Workload modeling and design optimization. IEEE Design and Test of Computers, 28(4), 78–87. https://doi.org/10.1109/MDT.2010.142.
Davis, J., Edgar, T., Graybill, R., Korambath, P., Schott, B., Swink, D., et al. (2015). Smart manufacturing. Annual Review of Chemical and Biomolecular Engineering, 6, 141–160. https://doi.org/10.1146/annurev-chembioeng-061114-123255.
De Amorim, M. D., Ziviani, A., Viniotis, Y., & Tassiulas, L. (2008). Practical aspects of mobility in wireless self-organizing networks. EEE Wireless Communications, 15(6), 6–7.
Derler, P., Lee, E. A., & Vincentelli, A. S. (2012). Modeling cyber-physical systems. Proceedings of the IEEE, 100(1), 13–28. https://doi.org/10.1109/jproc.2011.2160929.
Dillon, T. S., Hai, Z., Wu, C., Singh, J., & Chang, E. (2011). Web-of-things framework for cyber-physical systems. Concurrency and Computation Practice and Experience, 23(9), 905–923. https://doi.org/10.1002/cpe.1629.
Dong, J., Xiao, T., & Zhang, L. (2012). A prototype architecture for assembly-oriented cyber-physical systems. Paper presented at the Communications in Computer and Information Science, Shanghai, China.
Dubey, R., Gunasekaran, A., Childe, S. J., Wamba, S. F., & Papadopoulos, T. (2015). The impact of big data on world-class sustainable manufacturing. The International Journal of Advanced Manufacturing Technology, 84, 631–645.
Feld, T., Hoffmann, M., & Schmidt, R. (2012). Industry 4.0—From smart products to smart production. Information Management and Consulting, 27(3), 38–42.
Gunes, V., Peter, S., Givargis, T., & Vahid, F. (2014). A survey on concepts, applications, and challenges in cyber-physical systems. KSII Transactions on Internet and Information Systems, 8(12), 4242–4268. https://doi.org/10.3837/tiis.2014.12.001.
Hashem, I. A. T., Yaqoob, I., Anuar, N. B., Mokhtar, S., Gani, A., & Ullah Khan, S. (2015). The rise of "big data" on cloud computing: Review and open research issues. Information Systems, 47, 98–115. https://doi.org/10.1016/j.is.2014.07.006.
Hermann, M., Pentek, T., & Otto, B. (2015). Design principles for Industrie 4.0 scenarios: a literature review. http://www.snom.mb.tu-dortmund.de/cms/de/forschung/Arbeitsberichte/Design-Principles-for-Industrie-4_0-Scenarios.pdf.
Huang, G. Q., Wright, P. K., & Newman, S. T. (2009). Wireless manufacturing: A literature review, recent developments, and case studies. International Journal of Computer Integrated Manufacturing, 22(7), 579–594. https://doi.org/10.1080/09511920701724934.
Huang, G. Q., Zhang, Y. F., & Jiang, P. Y. (2008). RFID-based wireless manufacturing for real-time management of job shop WIP inventories. International Journal of Computer Integrated Manufacturing, 36(7–8), 752–764. https://doi.org/10.1007/s00170-006-0897-4.
Kagermann, H., Wahlster, W., & Helbig, J. (2013). Recommendations for implementing the strategic initiative INDUSTRIE 4.0. http://www.acatech.de/fileadmin/user_upload/Baumstruktur_nach_Website/Acatech/root/de/Material_fuer_Sonderseiten/Industrie_4.0/Final_report_Industrie_4.0_accessible.pdf.
Koubâa, A., & Andersson, B. (2009). A vision of cyber-physical internet. In Proceedings of 8th international workshop on real-time networks (RTN), Paris, France, 2009 (pp. 1–6).
Krishnamurthy, A. (2007). From just in time manufacturing to on-demand services. In C. Hsu (Ed.), Service enterprise integration: An enterprise engineering perspective. New York: Springer.
Lasi, H., Kemper, H.-G., Fettke, P., Feld, T., & Hoffmann, M. (2014). Industry 4.0. Business and Information Systems Engineering, 6(4), 239–242. https://doi.org/10.1007/s12599-014-0334-4.
Lee, E. A. (2008). Cyber physical systems: design challenges. In 11th IEEE international symposium on object oriented real-time distributed computing (ISORC), Orlando, FL, 2008 (pp. 363–369). https://doi.org/10.1109/isorc.2008.25.
Lee, J., Bagheri, B., & Hung-An, K. (2015). A cyber-physical systems architecture for Industry 4.0-based manufacturing systems. Manufacturing Letters, 3, 18–23. https://doi.org/10.1016/j.mfglet.2014.12.001.
Lee, J. Y., Choi, S. S., Kim, G. Y., & Noh, S. D. (2011). Ubiquitous product life cycle management (u-PLM): A real-time and integrated engineering environment using ubiquitous technology in product life cycle management (PLM). International Journal of Computer Integrated Manufacturing, 24(7), 627–649. https://doi.org/10.1080/0951192x.2011.569953.
Lee, J., Ghaffari, M., & Elmeligy, S. (2011). Self-maintenance and engineering immune systems: Towards smarter machines and manufacturing systems. Annual Reviews in Control, 35(1), 111–122.
Lee, J., Kao, H.-A., & Yang, S. (2014). Service innovation and smart analytics for Industry 4.0 and big data environment. Procedia CIRP, 16, 3–8. https://doi.org/10.1016/j.procir.2014.02.001.
Lee, J., Lapira, E., Bagheri, B., & Kao, H. A. (2013). Recent advances and trends in predictive manufacturing systems in big data environment. Manufacturing Letters, 1(1), 38–41.
Ma, H. D. (2011). Internet of things: Objectives and scientific challenges. Journal of Computer science and Technology, 26, 919–924.
Maione, B., & Naso, D. (2001). Evolutionary adaptation of dispatching agents in heterarchical manufacturing systems. International Journal of Production Research, 39(7), 1481–1503.
Mehrabi, M. G., Ulsoy, A. G., & Koren, Y. (2000). Reconfigurable manufacturing systems: Key to future manufacturing. Journal of Intelligent Manufacturing, 11(4), 403–419.
Meier, H., Roy, R., & Seliger, G. (2010). Industrial product-service systems-IPS2. CIRP Annals-Manufacturing Technology, 59(2), 607–627. https://doi.org/10.1016/j.cirp.2010.05.004.
Mordinyi, R., & Biffl, S. (2015). Versioning in cyber-physical production system engineering: best-practice and research agenda. In IEEE/ACM 1st international workshop on software engineering for smart cyber-physical systems, Florence, Italy, 2015 (pp. 44–47). IEEE. https://doi.org/10.1109/SEsCPS.2015.16.
Nonaka, I., & Takeuchi, H. (1995). The knowledge creating company: How Japanese companies create the dynamics of innovation. New York: Oxford University Press.
Owen, R., Macnaghten, P., & Stilgoe, J. (2012). Responsible research and innovation: From science in society to science for society with society. Science and Public Policy, 39(6), 751–760.
Pang, L. Y., Zhong, R. Y., Fang, J., & Huang, G. Q. (2015). Data-source interoperability service for heterogeneous information integration in ubiquitous enterprises. Advanced Engineering Informatics, 29(3), 549–561. https://doi.org/10.1016/j.aei.2015.04.007.
PCAST. (2007). Leadership under challenge: Information technology R&D in a competitive world. http://www.whitehouse.gov/sites/default/files/microsites/ostp/pcast-07-nitrd-review.pdf.
PCAST. (2008). Disruptive civil technologies-six technologies with potential impacts on US interests out to 2025. http://fas.org/irp/nic/disruptive.pdf.
Peter, O., & John, H. (2010). OMB-OSTP science and technology priorities memo.https://www.whitehouse.gov/sites/default/files/microsites/ostp/fy12-budget-guidance-memo.pdf.
Poetz, M. K., & Schreier, M. (2012). The value of crowdsourcing: Can users really compete with professionals in generating new product ideas? Journal of Product Innovation Management, 29(2), 245–256. https://doi.org/10.1111/j.1540-5885.2011.00893.x.
Ren, L., Zhang, L., Tao, F., Zhao, C., Chai, X., & Zhao, X. (2015). Cloud manufacturing: From concept to practice. Enterprise Information Systems, 9(2), 186–209. https://doi.org/10.1080/17517575.2013.839055.
Ruiz-Arenas, S., Horvath, I., Mejia-Gutierrez, R., & Opiyo, E. Z. (2014). Towards the maintenance principles of cyber-physical systems. Journal of Mechanical Engineering, 60(12), 815–831. https://doi.org/10.5545/sv-jme.2013.1556.
Schuh, G., Rudolf, S., Pitsch, M., Sommer, M., & Karmann, W. (2015). Modular service-oriented cyber-physical systems for the European tool making industry. Applied Mechanics and Materials, 752–753, 1349–1355. https://doi.org/10.4028/www.scientific.net/AMM.752-753.1349.
Sha, L., Gopalakrishnan, S., Liu, X., & Wang, Q. (2008). Cyber-physical systems: A new frontier. In Proceedings of the 2008 IEEE international conference on sensor networks, ubiquitous, and trustworthy computing, Taichung, Taiwan, 2008 (pp. 1–9). IEEE
Shi, J., Wan, J., Yan, H., & Suo, H. (2011). A survey of cyber-physical systems. In 2011 international conference on wireless communications and signal processing (WCSP), Nanjing, China (pp. 1–6). IEEE
Shrouf, F., & Miragliotta, G. (2015). Energy management based on Internet of Things: Practices and framework for adoption in production management. Journal of Cleaner Production, 100, 235–246. https://doi.org/10.1016/j.jclepro.2015.03.055.
Shrouf, F., Ordieres, J., & Miragliotta, G. (2014). Smart factories in Industry 4.0: A review of the concept and of energy management approached in production based on the Internet of Things paradigm. In 2014 IEEE International Conference on Industrial Engineering and Engineering Management, Selangor, Malaysia (pp. 697–701). IEEE. https://doi.org/10.1109/ieem.2014.7058728.
SMLC. (2011). Implementing 21st century smart manufacturing report. https://smartmanufacturingcoalition.org/sites/default/files/implementing_21st_century_smart_manufacturing_report_2011_0pdf.
Suh, S. H., Shin, S. J., Yoon, J. S., & Um, J. M. (2008). UbiDM: A new paradigm for product design and manufacturing via ubiquitous computing technology. International Journal of Computer Integrated Manufacturing, 21(5), 540–549. https://doi.org/10.1080/09511920802023012.
Verl, A., Lechler, A., & Schlechtendahl, J. (2012). Glocalized cyber physical production systems. Production Engineering, 6(6), 643–649. https://doi.org/10.1007/s11740-012-0418-2.
Wang, L., Törngren, M., & Onori, M. (2015). Current status and advancement of cyber-physical systems in manufacturing. Journal of Manufacturing Systems 37 Part, 2, 517–527. https://doi.org/10.1016/j.jmsy.2015.04.008.
Wang, X.-L., Chen, L.-N., & Huang, H.-B. (2010). A service-oriented architecture framework of cyber-physical systems. Journal of Computer Science Research and Development, 47(2), 299–303.
Wikipedia. (2017). Cyber-physical system. http://en.wikipedia.org/wiki/Cyber-physical_system.
Wolf, W. (2007). The good news and the bad news (embedded computing column). IEEE Computer, 40(11), 104–105. https://doi.org/10.1109/MC.2007.404.
Xinhua (2015). China Focus: “Made in China 2025” plan unveiled to boost manufacturing. http://news.xinhuanet.com/english/2015-05/19/c_134252394.htm.
Yao, X., Jin, H., & Zhang, J. (2015). Towards a wisdom manufacturing vision. International Journal of Computer Integrated Manufacturing, 28(12), 1291–1312. https://doi.org/10.1080/0951192X.2014.972462.
Yao, X., Lian, Z., Yang, Y., Zhang, Y., & Jin, H. (2014a). Wisdom manufacturing: New humans-computers-things collaborative manufacturing model. Computer Integrated Manufacturing Systems, 20(6), 1490–1498.
Yao, X., & Lin, Y. (2016). Emerging manufacturing paradigm shifts for the incoming industrial revolution. The International Journal of Advanced Manufacturing Technology, 85(5), 1665–1676. https://doi.org/10.1007/s00170-015-8076-0.
Yao, X., Yu, M., Chen, Y., & Xiang, Z. (2014b). Connotation, architecture and key technologies of internet of manufacturing things. Computer Integrated Manufacturing Systems, 20(1), 1–10.
Yao, X., Zhou, J., Zhang, C., & Liu, M. (2017a). Proactive manufacturing—a big-data driven emerging manufacturing paradigm. Computer Integrated Manufacturing Systems, 23(1), 172–185.
Yao, X., Zhou, J., Zhang, J., & Boër, C. R. (2017b). From intelligent manufacturing to smart manufacturing for Industry 4.0 driven by next generation artificial intelligence and further On. In 2017 5th international conference on enterprise systems (ES), 22–24 Sept 2017 (pp. 311–318). https://doi.org/10.1109/ES.2017.58.
Zhang, Y., Ren, S., Liu, Y., & Si, S. (2017). A big data analytics architecture for cleaner manufacturing and maintenance processes of complex products. Journal of Cleaner Production, 142, 626–641. https://doi.org/10.1016/j.jclepro.2016.07.123.
Zhang, Y., Zhang, G., Wang, J., Sun, S., Si, S., & Yang, T. (2015). Real-time information capturing and integration framework of the internet of manufacturing things. International Journal of Computer Integrated Manufacturing, 28(8), 811–822. https://doi.org/10.1080/0951192x.2014.900874.
Zhong, N., Ma, J. H., Huang, R. H., Liu, J. M., Yao, Y. Y., Zhang, Y. X., et al. (2013). Research challenges and perspectives on wisdom web of things (W2T). Journal of Supercomputing, 64(3), 862–882.
Zuehlke, D. (2010). SmartFactory–towards a factory-of-things. Annual Reviews in Control, 34(1), 129–138.
Acknowledgements
The project was supported by the National Natural Science Foundation of China under Grant Nos. 51675186 and 51175187, and the Science and Technology Foundation of Guangdong Province under Grant Nos. 2016B090918035 and 2017A030223002.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yao, X., Zhou, J., Lin, Y. et al. Smart manufacturing based on cyber-physical systems and beyond. J Intell Manuf 30, 2805–2817 (2019). https://doi.org/10.1007/s10845-017-1384-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10845-017-1384-5