Development of 5-axis Force/Moment Sensor of Gripper to Recognize the Position of an Object within the Gripper

김진; 김갑순

doi:10.7736/JKSPE.022.139

주제분류

...

저널정보

Korean Society for Precision Engineering
Journal of the Korean Society for Precision Engineering 학술저널
Journal of the Korean Society for Precision Engineering Vol.40 No.5
2023.5 415 - 422 (8page)
DOI : 10.7736/JKSPE.022.139

저자정보

김진 (경상국립대학교)
김갑순 (경상국립대학교)

이용수
내서재: 1

내서재에 추가
되었습니다. 내서재에서
삭제되었습니다.

초록·키워드

오류제보하기

In this paper, we describe the development of a 5-axis force/moment sensor of an intelligent gripper designed to grasp the weight of an unknown object and the position of the object in the gripper. The 5-axis force/moment sensor consists of an Fx force sensor, Fy force sensor, and Fz force sensor to measure weight, along with an Mx moment sensor and Mz moment sensor to determine the position of an object in the gripper. These sensors are all built within a single body. Each sensor sensing part of the 5-axis force/moment sensor was newly modeled and custom designed using software, and each sensor was manufactured by attaching a strain gauge. The results of the characteristic test of the fabricated 5-axis force/moment sensor showed that the rated output error was within 0.1%, the reproducibility error was within 0.05%, and the nonlinearity error was within 0.04%. Therefore, the 5-axis force/moment sensor developed in this paper can be attached to an intelligent gripper and be used to grasp the weight of an unknown object as well as the position of the object in the gripper.

#5-axis force/moment sensor (5축 힘/모멘트센서) #Intelligent gripper (지능형 그리퍼) #Intelligent robot (지능로봇) #Strain gage (스트레인게이지) #Rated output (정격출력) #Nonlinearity error (비직선성오차)