Taxonomic reassessment of Hydralmosaurus as Styxosaurus: new insights on the elasmosaurid neck evolution throughout the Cretaceous

Two extremely-long necked elasmosaurids, AMNH 1495, holotype of Hydralmosaurus serpentinus, and AMNH 5835, previously referred to H. serpentinus, are here reviewed in detail. Unique features of the cervical vertebrae, which are only present on elasmosaurids from the Western Interior Seaway, are recognized based on these specimens and by comparison with penecontemporaneous taxa with biogeographic affinities. Phylogenetic analysis, bivariate graphic analysis of cervical vertebrae proportions, comparisons of different cervical vertebral types, paleobiogeographic distribution and study of the elasmosaurid axial evolution throughout the Cretaceous are here integrated. As a result, at least two separate lineages within the Elasmosauridae are identified by independently acquired extremely-long necks (over 60 cervical vertebrae). First, a still scarcely known lineage is so far represented by the lower Cenomanian Thalassomedon haningtoni, the Turonian Libonectes morgani and close relatives. A second lineage is here defined as a new clade, the Styxosaurinae, which groups the Campanian genera Terminonatator, Styxosaurus (=‘Hydralmosaurus’), Albertonectes and Elasmosaurus, the two latter forming a derived branch that includes the most extreme amniote necks known to date (more than 70 cervical vertebrae). Phylogenetic analysis supports AMNH 1495 and AMNH 5835 as being closely related to Styxosaurus snowii. Therefore, the species Styxosaurus browni is re-validated, while AMNH 1495 is here referred to Styxosaurus sp. This research also recognizes the ‘Cimoliasauridae’ (nomen dubium) as a paraphyletic group but informative of a plesiomorphic cervical vertebral morphology of elasmosaurids which was persistent throughout the whole Cretaceous and from whom aristonectines, styxosaurines and Thalassomedon and close relatives are derived. The genus Hydralmosaurus is recommended for being abandoned.


163
Cervical ribs, size and orientation of distal processes: marked anterior and posterior processes throughout cervical rib series, combined long axis of processes oriented approximately anteroposteriorly (0); processes reduced, especially anterior process, combined long axis oriented posteroventrally (1); large, anteroposteriorly expansive, sheet-like ribs with prominent processes (2).
New state: (2) octagonal outline due large facets fo the neural arch and ribs, plus presence of a flattened ventral surface Benson, Evans & Druckenmiller (2012a, character 150).
because the assumption is that the samples have unequal sizes. The Kruskal-Wallis Test was performed with the PAST software V.1.95 (Hammer, Harper & Ryan, 2001). A p-value of 0.01 was considered significant. Neck length estimation-For those specimens here reviewed which preserve fairly complete necks, an estimation of their effective neck length was calculated. This takes in account the sum of the length of each cervical vertebra. For absent cervical elements or else, for those cervical elements that cannot be measured, an average value is calculated based on the sum of every centrum length, divided by the number of cervical centra. This value was replaced on each missing or unavailable element and it was considered in the total cervical length sum.
Nomenclatural acts-The electronic version of this article in Portable Document Format (PDF) will represent a published work according to the International Commission on Zoological Nomenclature (ICZN), and hence the new names contained in the electronic version are effectively published under that Code from the electronic edition alone. This published work and the nomenclatural acts it contains have been registered in ZooBank, can be resolved and the associated information viewed through any standard web browser by appending the LSID to the prefix ''http://zoobank.org/''. The LSID for this publication is: urn:lsid:zoobank.org:pub:1E0DA2E1-50A9-453D-BC3F-D036DA44B389. The online version of this work is archived and available from the following digital repositories: PeerJ, PubMed Central and CLOCKSS.

LOCALITIES, HORIZON AND AGES OF THE RE-DESCRIBED SPECIMENS
The respective localities, horizons and ages of additional specimens considered on this study are summarized in Table 1. Localities of elasmosaurids from the Western Interior Seaway are indicated in Fig. 1A. Particularly, the specimens studied here are: AMNH 1495 (Fig. 1B)-Locality of provenance was regarded by Cope (1877) as from ''the blue shale of Cretaceous N • 3, in a bluff of Nebraska, on the southwest side of the Missouri, between Sioux City, Iowa, and Yankton, Dakota''. Welles (1943) indicates an equivalence for Cretaceous N • 3 as Niobrara or Pierre Shale.
AMNH 5835 (Fig. 1C)-Locality of provenance originally indicated by Welles (1952) is Mule Creek, 15 miles west of Edgemont, South Dakota, USA. The specimen was collected in 1904 by Barnum Brown, placing its horizon as Niobrara. Additional comments by Welles (1962) about the lithology observed on the hosting blocks correlate them with the Pierre Shale Group.
The lithology associated to AMNH 1495 and AMNH 5835 is consistent with that described for the 'Sharon Springs Member' (Elias, 1931). The latter unit was later re-ranked to formation level within the Pierre Shale Group. The Sharon Springs Formation comprises black to gray, highly organic claystone with a fissile parting, commonly with concretions and numerous yellow-weathered bentonite beds, particularly near the base (Martin, Bertog & Parris, 2007). The age of the Sharon Springs Formation is constrained by ammonoid biozones, particularly in the range of Baculites obtusus through Baculites perplexus. This indicates a middle Campanian age (Cobban, 1993;Obradovich, 1993;Grandstein et al., 1994;Bertog, 2010).

INTERNAL RELATIONSHIPS OF THE ELASMOSAURIDAE: TAXONOMICAL HYPOTHESIS
As previously expressed by O' Keefe & Hiller (2006), ''variability is the rule'' on the elasmosaurid neck. These authors noted the existence of taxa with conservative necks, calling them non-elongate taxa, and a second group, denominated as elongate taxa, possessing very long centra in the mid-cervical region. Also, at least three sources of differences on cervical vertebrae were detected: ontogenetic allometry, intracolumn variation and taxonomic variation. Later, Otero et al. (2015a) proposed an informal segregation of three groups within Elasmosauridae. In addition to the clade Aristonectinae (Otero, Soto-Acuña & Rubilar-Rogers, 2012), these authors separated those forms from North America, possessing extremely-long necks, from a second elasmosaurid type with comparatively shorter centra (but longer than those of aristonectines). The latter were considered basal representatives, and therefore, informally called 'plesiomorphic forms'. Elasmosaurids with this type of cervical vertebrae precisely match the classic concept of 'Cimoliasauridae ' DeLair, 1959 (nomen dubium), currently considered as junior synonym of Elasmosauridae (O'Keefe & Street, 2009). The polyphyletic status of 'Cimoliasauridae' and its broad usage as a ''waste-basket'' taxon are not subject to discussion. However, information exposed in this research shows that these type of cervical vertebrae can be taxonomically informative, although they cannot resolve to genus nor species level. In order to avoid direct homologation of this cervical type neither with the taxon 'Cimoliasauridae', nor with the genus 'Cimoliasaurus ' Leidy, 1851, the 'Cimoliasaurus'-grade cervical morphotype is here proposed. This definition reinstates the cervical features orginally described by Leidy (1851) for the type specimen of 'Cimoliasaurus magnus' (nomen dubium), currently under the acronym and numeration AMNH 2554. Cervical centra of AMNH 2554 are distinguishable intermediates between the elongated cervical centra present in elasmosaurids from the Western Interior Seaway such as Elasmosaurus platyurus, Styxosaurus snowii (Williston, 1890), 'Hydralmosaurus serpentinus' (Cope, 1877), and Terminonatator pointeixensis Sato, 2003, and those axially shortened centra of aristonectines such Aristonectes parvidens Cabrera, 1941, Aristonectes quiriquinensis Otero et al., 2014c, Morturneria seymourensis (Chatterjee & Small, 1989) and Kaiwhekea katiki Cruickshank & Fordyce, 2002. The relationships between these three morphotypes are among the subjects of study of this research.
Diagnosis-Xenopsarian plesiosaurians mostly restricted to the Cretaceous, unambiguously distinguished by the following combination of characters: cervical vertebrae with ventral notch (shallow in basal elasmosaurids and well-marked in Late Cretaceous forms) giving them a bilobed articular outline; neural arches much narrower than their respective centra; pre-and postzygapophyses as narrow as the neural arch, dorsally recurved and partially meeting in the midline; medial embayment of the posterior portion of the coracoid. A plesiomorphic number of cervical vertebrae higher than 40 is a feature present in all known elasmosaurids preserving complete enough necks. However, this feature is shared with derived cryptoclidids such as Djupedalia and Spitrasaurus (Knutsen, Druckenmiller & Hurum, 2012a;Knutsen, Druckenmiller & Hurum, 2012b). Derived Late Cretaceous forms within Elasmosauridae include the largest necks among sauropterygians (and among amniotes), with over 70 cervical vertebrae, unique axially elongated centra and skulls reduced in length. Late Cretaceous elasmosaurids also include atavic forms retaining ca. 45 cervical vertebrae with shortened centra and enlarged skulls (aristonectines).
Diagnosis-Clade of Campanian elasmosaurids from the Western Interior Seaway, distinguished by the following combination of characters: 60 or more cervical vertebrae (the minimal number of cervical vertebrae is based on the count of AMHN 1495 which has 58 cervical vertebrae and few estimated missing cervical centra); presence of mid cervical centra axially elongated reaching a length between two thirds to twice its width, being as broad as high (''can-shaped'' cervical vertebrae); neck much longer than the trunk; skull less than one tenth the cervical series length; plesiomorphic number of 17-19 dorsal vertebrae (see 'Discussion').
Genus HYDRALMOSAURUS Welles, 1943, nomen dubium Type species-AMNH 1495. Elasmosaurus serpentinus (Cope, 1877). Original generic diagnosis- Welles (1943) coined the genus Hydralmosaurus considering as diagnostic features: the absence of pectoral and pelvic bars, the absence of lateral longitudinal ridges on posterior cervical vertebrae, the presence of cordiform fenestra on the coracoids, pubes with a concave anterior border, humerus head well-separated from the tuberosity, and a well-developed epipodial foramen.
Comments-With the exception of the concave anterior pubis border, all these characters are ambiguous because they can be found in other elasmosaurids. In addition, a few of these characters even depend on the ontogenetic stage of the specimen (see 'Discussion'). Carpenter (1999) indicates a separation of Hydralmosaurus from Libonectes, as well as from Styxosaurus and Thalassomedon, based on the presence of 62 cervical vertebrae of the first, and 63 cervical vertebrae on the two latter taxa. This feature is arguable because it assumes an excellent preservation as well as a rigorous recovery of the complete neck. Considering that all these specimens were collected during the late 19th century, with documented cases of discrepancy on the real cervical number in some specimens (Everhart, 2005;Sachs, 2005;Sachs, Kear & Everhart, 2013), this putative character should be rejected. This study cannot verify the condition of the pubis with an anterior concave margin, because this is fragmentary and preserved on several pieces without contact between them. An additional diagnostic feature described by Carpenter (1999) is the humerus with a pronounced posterior expansion on its distal end, unlike all other elasmosaurids, and the absence of pectoral and pelvic bars. AMNH 1495 does not preserve its humeri.
Summarizing, the morphologic features of AMNH 1495, so far considered as diagnostic to genus level, should be rejected. New diagnostic features need to be identified for a taxonomical reassessment of this specimen.
Remarks-A propodial referred as the humerus of AMNH 1495 was presented by Carpenter (1999: Fig. 7A) through a drawing taken from Welles (1952: Fig. 4B). The first description of H. serpentinus, Welles (1943: Fig. 29) exhibited the pectoral girdle and one forelimb. This current review of AMNH 1495 allows recognizing that the pectoral outline is consistent with the preserved portions of this specimen. Nonetheless, the two preserved propodials do not match the outlines nor the preserved portions described by Welles (1943) and Welles (1952). Interestingly, the original forelimb outline described by Welles (1943: Fig. 29) and Welles (1952: Fig. 4B) and subsequently cited by Carpenter (1999: Fig. 7A) precisely matches the forelimb of AMNH 5835 (type of Styxosaurus browni Welles, 1943, below), both in shape and in the preserved portions. This was illustrated by Welles (1952: Fig. 7). AMNH 5835 forelimb was drawn from a dorsal view, while the putative forelimb of AMNH 1495 (Welles, 1952: Fig. 4B) was drawn from a ventral view. Thus, it is likely that Welles confused the forelimbs of both specimens, with the subsequent taxonomical consequences. After these publications, no further description of the AMNH 1495 forelimb has been provided. Furthermore, among the material, the forelimb of AMNH 1495 was not found.
Due to the unsatisfactory status of AMNH 1495, which is the only specimen fixed to Hydralmosaurus, a reassessment is proposed (see below).
Locality, horizon and age-AMNH 5835: Mule Creek, 15 miles west of Edgemont, South Dakota. AMNH 1495: southwest side of the Missouri, between Sioux City, Iowa, and Yankton, Dakota. Both specimens are from the Sharon Springs Formation, lower Pierre Shale Group. Baculites obtusus -Baculites perplexus biozone, middle Campanian.
KUVP 434: For this specimen, Williston (1903) indicates the presence of both ischia, ilia, seven cervical vertebrae and an undetermined number of caudal vertebrae. Later, Williston (1906) emended the taxon to 'Elasmosaurus ischiadicus', likely based on the features of the cervical vertebrae. Welles (1943) referred this specimen to a new genus, 'Thalassiosaurus ischiadicus', distinguishing it from the genus Elasmosaurus (fixed to ANSP 10081) by having a ''pubis convex anteriorly as in E. platyurus, but without median bar''. The pelvic girdle of ANSP 10081 is lost, making any comparison impossible. Moreover, pelvic features are not diagnostic enough for a genus-level determination. Welles (1943) also added some features of the hind limb to the diagnosis, however, this portion is not preserved on KUVP 434 so the features were based on a second specimen (YPM 1130, see below) referred to the same species by Williston (1906). The anatomic portions of KUVP 434 are not diagnostic to genus-level and should be referred to Elasmosauridae indet. USNM 11910: It comprises the posterior cervical, dorsal, sacral and caudal vertebrae, plus the pelvis. It was referred by Carpenter (1999) to Styxosaurus snowii.
YPM 1130: This specimen comprises both pubes, ischia, one ilium and one limb. It was tentatively referred by Williston (1906) to 'Elasmosaurus ischiadicus' based on its cervical vertebrae as well as its short ischium. This was later considered as a referred specimen of 'Thalassiosaurus ischiadicus' by Welles (1943). Later, Welles (1952) considered it as a new genus and species, 'Alzadasaurus kansasensis' (nomen dubium), indicating the presence of 28 cervical vertebrae, 5 pectorals, 3 dorsals, 5 sacrals, 22 caudals, and the right hindlimb (first considered as a forelimb by Williston, 1906). This completeness could be informative for recognizing a congenerity with AMHN 1945 and AMNH 5835, here studied. YPM 1644: First described by Williston (1906) and referred to 'Elasmosaurus' snowii. It comprises a partial vertebral column (cervical and dorsal vertebrae), pectoral girdles, humerus and pubis. The anatomical identity of the humerus was discussed by Welles (1943), who considered it a femur. If so, this propodial matches the femur of AMNH 1495 and it likely belongs to Styxosaurus. Carpenter (1999) considered this specimen a junior synonym of Styxosaurus snowii.
YPM 1645: This specimen comprises 32 vertebrae, a scapula, and a nearly complete limb. It was first described by Williston (1906) and referred to Elasmosaurus (?) marshii. Later, Welles (1943) reasigned it to a new genus, 'Thalassonomosaurus' marshii. The scapula is slightly similar to those of AMNH 5835; the humerus is also very similar to that of AMNH 5835. It likely belongs to Styxosaurus.
SDSM 451: This specimen is a nearly complete skeleton referred to 'Alzadasaurus pembertoni' by Welles & Bump (1949). The skull length (37.5 cm) and general shape are very alike to KUVP 1301. The 61 cervical vertebrae (59 plus the atlas-axis) are remarkably similar and almost match in number to those of AMNH 1495 and AMNH 5835. Furthermore, the scapulae are similar to those of AMNH 5835 (poorly known in AMNH 1495). The coracoids of SDSM 451 and AMNH 5835 have different posterior embayments, however, the re-joining observed on SDSM 451 likely represents a later ontogenetic stage. Finally, the ischia of SDSM 451 are almost identical to those of AMNH 1495, while the ilia are very similar. All these features strongly support SDSM 451 as within the genus Styxosaurus.
Synonyms-The monospecific genus Hydralmosaurus is represented by its type species H. serpentinus (AMNH 1495) and by the unique referred specimen AMNH 5835. Both are here referred to the genus Styxosaurus, leaving Hydralmosaurus as a void taxon.
Hydralmosaurus is subsequently considered as junior synonymy of Styxosaurus.
Revised generic diagnosis-Skulls of KUVP 1301 and AMNH 5835 share common features of non-aristonectine elasmosaurids: orbit placed near the half of the skull length; orbit length equivalent to half the length of the temporal fenestra; orbit with reniform ventral margin; postorbital with triangular outline; sigmoidal tooth row with quadrate articulation projected ventrally with respect to the rest of the skull (tooth row higher than the glenoid); presence of caniniform teeth; less than 20 maxillary teeth; squamosals possessing a posteriorly projected boss.
Differential Diagnosis-Styxosaurus differs from other elasmosaurids in the following cranial characters: 4-5 premaxillary teeth, differing from Eromangasaurus carinognathus (7) and from Elasmosaurus platyurus (6); 15 maxillary teeth on Styxosaurus, differing from Callawayasaurus colombiensis (17+), Hydrotherosaurus alexandrae (9), Thalassomedon haningtoni (7), Terminonatator pointeixensis (13) and Zarafasaurus oceanis (10-11). The genus Styxosaurus has a number of premaxillary and maxillary teeth similar to Libonectes morgani, Tuarangisaurus keyesi, Futabasaurus suzukii (maxillary count unknown), although, it differs from L. morgani in having a less axially elongated premaxilla, as well as a smaller and not rounded orbit. Styxosaurus also differs from T. keyesi. The latter posesses an orbit comparatively larger, with a craniocaudal length close to that of its temporal fenestra. It also has a prominent dorsal margin of the orbit, which is absent on Styxosaurus. Furthermore, Futabasaurus has a flat ventral margin of the orbit, contrary to the convexity of the same margin in Styxosaurus. In addition, the skulls of KUVP 1301 and AMNH 5835 possess a ridge in the margin of the temporal fossa which is not present in any of the afore mentioned genera and species preserving the temporal bar. Additional postcranial characters rely on AMNH 5835: more than 60 and less than 65 cervical vertebrae; ''can-shaped'' mid cervical vertebrae with lateral keels; coracoids with an embayment in the posterior midline; humerus with an expanded postaxial distal margin. AMNH 1495 cervical measurements have a remarkable degree of morphological overlap with those of KUVP 1301, except in c3 and c4. However, such differences could be due to the fact that the amount of anterior cervical vertebrae missing in AMNH 1495 is unclear (Welles, 1952: p. 62). Otherwise, based on the cervical values provided by Welles (1952: Table 5), c6 of KUVP 1301 has proportions similar to c7 and c8 of AMNH 1495; c9 of KUVP 1301 and c9 of AMNH 1495 have very similar proportions; c14 of KUVP 1301 has measurements close to c15 of AMNH 1495; and last, c20 of KUVP 1301 is remarkably similar in measurements to c20 or c21 of AMNH 1495. Furthermore, cervical measurements of KUVP 1301 are remarkably similar to those of AMNH 5835, supporting that those three specimens belong to closely related animals. Measurements of the three specimens are summarized in Table 4. STYXOSAURUS SP.
Locality, horizon and age-Following Cope (1877), collected from blue shales on the southwest side of the Missouri River, between Sioux City, Iowa, and Yankton, Dakota. Lower Pierre Shale Group, Sharon Springs Formation, Baculites obtusus-Baculites perplexus biozone, middle Campanian (Welles, 1943;Martin, Bertog & Parris, 2007;Bertog, 2010).  Taxonomical determination-overlapping material between AMNH 1495 and KUVP 1301 (holotype of S. snowii) only includes their cervical vertebrae. On the other hand, the completeness of AMNH 1495 permits a good comparison with S. browni (AMNH 5835; holotype, below), as both have several relevant differences that support them as different taxa. AMNH 1495 differs from S. browni (AMNH 5835) in the following features: a slightly smaller adult skeleton, a glenoid process of the scapula less expanded than that of S. browni, a scapular shaft shorter than that of S. browni, and transverse processes of dorsal vertebrae that are laterodorsally oriented on AMNH 1495 while in S. browni these are almost horizontal. Welles, 1943Figs. 7-11 Styxosaurus browni: In Welles, 1952Welles, 1962;Persson, 1963;Kuhn, 1964. Hydralmosaurus serpentinus: In Carpenter, 1999 Holotype-AMNH 5385. Skull, complete neck, anterior trunk and left forelimb.
Differential Diagnosis-AMNH 5835 has a jugal bar comparatively higher in its posterior margin, with a well-marked temporal ridge on its medial aspect, and its anterior part is dorsoventrally narrower just behind the orbit, as opposed to S. snowii (KUVP 1301), whose jugal bar is more squared and the temporal ridge is shallower. Preorbital boss is rounder and larger than that of S. snowii; dorsal contact of squamosals is not prominent with respect to the sagittal crest, as it occurs on S. snowii; height of the posterior process of the maxilla reaches the half of the jugal bar, while in S. snowii this is one third the height of the jugal bar.

OSTEOLOGICAL DESCRIPTION OF AMNH 1495, STYXOSAURUS SP.
Ontogenetic stage-AMNH 1495 is referred to an adult based on the lost neurocentral sutures in the axial skeleton, as well as on the well-defined facets of the humerus, epipodials and distal carpals. Such features have been considered as indicative of an adult stage (Brown, 1981).
Cervical vertebrae-AMNH 1495 anterior cervical vertebrae do not preserve any complete cervical rib, while neural arches are mostly incomplete (Fig. 2). The latter are much narrower than the centrum and they have a neural canal that is dorsoventrally short and circular. A remarkable feature on the neck is observed in c35, which marks a morphological inflection between the anterior cervical centra and the rest of the neck (Fig. 2). Between c3 and c10 the proportions of each centra are similar. Around c6 and c7, a soft lateral keel appears. These centra are broader than high and as high as long, with a ventral notch that gives them a bilobed articular outline. On ventral view, the two foramina are short and separated by a ventral keel. The articular facets are slightly prominent with respect to the body of the centrum, having axial striations surrounding the articular facet on their lateral and ventral sides. Centra are mostly platycelous, while anteriormost elements are slightly amphicelous (Figs. 3A and 3B). From c11 to posterior, a progressive increase of the centrum length is noted. Around c24-c34, the length of each centrum reaches near twice their respective height (or width). Also, lateral keels of each centrum become well-marked (Figs. 3C and 3D).
These centra are remarkably unique among elasmosaurids. Outside the Western Interior Seaway such cervical proportions remain unreported (see 'Discussion'). A cervical node is visible on c35 (Fig. 2). This centrum is remarkably shorter than the previous ten anterior centra. A marked change is also present on the lateral keel, which becomes shallower. From c36 backwards, the length of each centrum again increases, being one third larger than c35 length. Also, the preserved neural spines show a blade-like lateral outline are placed over  Welles (1943). Anatomical abbreviations: cr, cervical ribs; nc, neural canal; lk, lateral keel; prz, prezygapophysis; vf, ventral foramina; vk, ventral keel. Scale bar equals 5 cm. each centra without any anterior or posterior shifting (as it occurs on anterior cervical vertebrae of AMNH 5835). From c39 onwards, cervical vertebrae are mostly covered by sediment, still, they show elongated centra and progressively higher neural spines that reach twice the centrum height on their posterior elements. All the centra with their ventral portion visible exhibit a ventral keel that separates the ventral foramina. The last numbered cervical vertebra is c56, followed by five vertebrae preserved in two blocks and obscured by the sediment. Thus, the final cervical numeration should be c61, but, taking into consideration that the cervical count of AMNH 1495 starts at c3, 58 cervical vertebrae are actually known for this specimen.
Dorsal vertebrae-15 dorsal vertebrae are preserved on five different blocks. The anteriormost dorsal centrum is numbered 65, implying that only three vertebrae (62-64) are missing. Considering the height of the dorsal processes on vertebra 65, which are far from the neurocentral suture (Fig. 4A), plus the three absent vertebrae 62-64, it is evident that the current numeration is likely omitting two or three centra, which are pectoral or anterior dorsal verterbrae. Considering these absent elements, the dorsal count reaches 17 or 18 centra. Morphologically, dorsal vertebrae of AMNH 1495 are typical of elasmosaurids, with centra as long as broad as high, neural arches narrower than the centrum, robust transverse processes, short and suboval neural canali and high neural spines ( Fig. 4A and 4B). The dorsal vertebra 65 shows transverse processes with 30 • -35 • of inclination with respect to the horizontal axis (Fig. 4C). Also, the neural spines have near 1.5 times the height of the centrum, with an anterior triangular cross section that indicates a blade-like dorsal edge instead a flat top. Articular facets are rounded. From the dorsal vertebra 70 and posteriorly, the transverse processes are comparatively less robust than those of the anterior dorsal vertebrae. These also have a lower angle, close to 20 • . In addition, the transverse processes are progressively recurved backwards on posterior dorsal vertebrae, while neural spines become shorter and thicker.
Sacral vertebrae-Three articulated sacrals are preserved, numbered 80-82. These centra are longer than broad and as broad as high, with rounded articular facets. The rib facet passes from a ventral short rib facet, dorsoventrally higher than axially long, to an 'eight shaped' facet that occupies nearly two thirds of the lateral surface of the centrum. On these vertebrae, the neural spines are short and have a squared outline.
Caudal vertebrae-The first caudal is attached to the same block as the sacrals, being numbered as 83. The rest of the caudal vertebrae are preserved in a block including elements 84-86, while the remaining centra are separated from the matrix. A total of twenty-two caudal vertebrae are here recognized. The anterior caudal vertebrae are as broad as high and as long as broad, with a slightly hexagonal outline, a rounded and reduced neural canal, and short neural spines with an anterior triangular cross-section. On lateral view (Fig. 4D), the caudal rib facets become progressively ventralized until centrum 88, where these appear in a more dorsal position. From centrum 88 backwards, these facets descend again and migrate anteriorly from centrum 98-101, where finally they fade. Ventrally, from centrum 86 and backwards, there is a marked pair of facets towards the haemal processes. These facets are placed on the ventroposterior articular margin of each centrum. From centrum 91 backwards, a pair of shallow anterior facets for the haemal processes appear on each centrum, showing that haemal processes were placed between each centrum (Fig.  4E). The caudal articular facets are progressively depressed in the dorsoventral direction,  while in the last caudal centra they acquire a nearly squared outline (Fig. 4F). The last two caudal vertebrae, c103 and c104, are attached together. Coracoids-Although the pectoral girdle is fragmentary, the coracoids can be interpreted based on the available portions (Fig. 5A). A good part of the anterior portion of both coracoids retains its anatomical position. The left coracoid is the most complete and shows a straight midline where it joins the right coracoid. The anteromedial process is laterally curved and does not extend far beyond the glenoid, thus, not having any medial contact with the scapula (pectoral bar absent). A ventral process is present in both coracoids adjacent to the midline. The glenoid facet is poorly differentiated from the scapular facet. Both facets are anteriorly oriented in ca. 45 • with respect to the axial direction. Medially, a small portion of the coracoid outline is complete, showing the lack of medial contact with other elements. The posterior part of the left coracoid is identified based on its ventral concavity and dorsal convexity. This preserves part of the posterior outline. These portions contribute to verifying the presence of an open cordiform fenestra between the posterior end of both coracoids.
Scapula-Only the posterior portion of the left scapula is preserved (Fig. 5B) and still embedded in the matrix. This is available only in a ventral view, showing the presence of a ventral keel, a gracile shaft and a posterior margin expanded about two thirds of the shaft breadth. The articular facets for the coracoid and for the glenoid are poorly differentiated. Together with the coracoid, both elements form a glenoid narrower than the articular head of the humerus.
Pubis-The pubes are very fragmentary and their preserved portions do not allow understanding their outline. Three fragments suggest a rounded anterolateral margin (Fig.  5C), however, this cannot be assured. Additional remains (Fig. 5D) belong to the ischial facet and likely, to a lateral cornua. The posteriormost portion of the right pubis can be attached to the right ischium and ilium.
Ischium-The acetabular fragment of the left ischium (Fig. 5E) and most of the right ischium are preserved (Fig. 5F). The ischium is as long as broad, with a shallow transverse process extended between the midline and the acetabulum. The articular facet for the pubis is recurved with respect to the transverse process. The posterior end of the ischium is flattened and has a rounded contour.
Ilium-The right ilium is the only one preserved (Figs. 5G-5I). This element is remarkably distinctive from other elasmosaurids due to the presence of a triangular outline from an internal view, with a expanded ventral margin and a very narrow dorsal end (Fig. 5G). It can be seen that the shaft is slightly sigmoidal, while the dorsal articulation for the sacral ribs is recurved. The ventral end has a large articulation for the ischium. A medial knee is visible over the external surface on an anterior view (Fig. 5H). Both the sacral and the pubic facets are visible from an internal view (Fig. 5I).
Hindlimbs-Although the left femur (Figs. 5J, 5M and 5N) is dorsoventrally crushed, it is possible to asses that it matches the outline and general shape of the right femur. Proximally, the trochanter is identical in shape, and in both cases it is slightly shifted anteriorly with respect to the axial midline. The distal facets are identical, considering that a small fragment of the fibular facet is missing. The articular head of the left femur is evidently crushed (Fig. 5N). This condition affected most of the shaft. The crushed shaft was re-attached to the undeformed distal end, causing a prominent edge on the preaxial margin of the shaft, which is an artifact caused by the different degree of compression on each part of the bone.
Most of the right hindlimb is preserved in three major blocks ( Fig. 6A and 6B). The right femur remains articulated with the epipodials and the distal tarsal elements, while additional proximal and distal elements are in separate blocks. The right femur (Figs. 6A-6E) has a straight shaft and expanded distal facets. The latter are slightly concave for articulation with the respective epipodials. Proximally, the femur has an articular head prominent in comparison to the shaft and a dorsally prominent trochanter (Figs. 6C-6D). The tibia is slightly longer than broad, with a notched preaxial margin, while the postaxial margin is straight. The fibula has remarkable features. It is longer than broad, with a straight preaxial margin and a deeply concave postaxial margin. An epipodial foramen is lacking between these two elements. The tibiale, part of the central element (here interpreted as the intermedium + centrale) and part of the fibulare are preserved in the same block. Nonetheless, the latter two are better preserved in the available portion of the left hindlimb (Fig. 6F). The tibiale preserved on the femur block shows a rhomboidal shape and it is as long as it is broad. The intermedium + centrale on the left hindlimb has at least four facets between the fibula and the tibia. The outline of this element is polygonal, as broad as it is long. The fibulare is fused to a sesamoid in its postaxial margin (Fig. 6G). In addition, a pisiform is settled over the postaxial margin between the fibula and fibulare. This pisiform has a circular anterior outline and a straight posterior margin. Prior to the fusion of the sesamoid, the fibulare likely had a concave postaxial margin, as it occurs with the fibula. The preserved pisiform is articulated and placed in the postaxial margin between the fibula and fibulare, leaving an unusual gap on the postaxial margin of the fibula. Furthermore, if this element actually belonged to a sesamoid articulating with the fibula, the postaxial gap between fibula and fibulare would be even larger. Based on the good preservation and articulation of the left hindlimb portion, this research considers that the pisiform is indeed articulated and not displaced, while a missing element, likely a sesamoid, is absent on the postaxial margin of the fibula. Distal tarsals 2+3 and 4 are well preserved. These are axially longer than broad, having both a squared outline and a pair of proximal facets for articulation with the fibulare, intermediate + centrale and tibiale. Finally, the phalanges are spool-shaped, elongated, and dorsoventrally flattened.

OSTEOLOGICAL DESCRIPTION OF AMNH 5835, STYXOSAURUS BROWNI WELLES, 1943
Ontogenetic stage-The skull sutures are mostly lost. In addition, the humeri and epipodials have well-defined facets. The axial skeleton has neurocentral sutures lost. All these characters suggest an adult stage for AMNH 5835, following the criteria of Brown (1981).
Skull-The skull of AMNH 5835 (Figs. 7A and 7B) is laterally crushed and only visible on right view. The anteriormost part of the rostrum and dentaries are lost. General features (G) close-up of the ulnare fused to a sesamoid. Anatomical abbreviations: cr?, caudal ribs?; dt1, distal carpal 1; dt2 + 3, distal carpal 2 + 3; dt4; distal carpal 4; f, femur; fh, femoral head; fi, fibula; fb, fibulare; mt1, metatarsal 1; mt5, metatarsal 5; ps, pisiform; px, phalanges; ses, sesamoid; ses?, expected sesamoid; ti, tibia; tb, tibiale; tr, tuberosity. Scale bar equals 100 mm; except (G), 10 mm. are the presence of a large temporal fossa having near one third of the skull length, and the orbit settled in the middle part of the skull. The orbit has a reniform outline and its ventral margin is convex. The temporal fossa has a squared contour with a medial ridge over its lateral margin. The anterior part of the fossa extends just posterior to the orbit, separated by a bony bridge, likely the postorbital. Most sutures are difficult to see. The most evident suture is the contact between the maxillary and the rest of the jugal bar. From the posterior margin of the orbit, the posterior extension of the maxilla is equivalent to the orbit length. The jugal bar has its narrower part anteriorly, becoming thicker towards its posterior end. The squamosal arch is completely preserved. Each squamosal dorsal process is axially compressed. The squamosals meet at the midline and form a dorsal boss on the dorsal part of the skull. The posterior part of the skull has no visible sutures. The posterior margin of the left squamosal is partially visible, showing a posteriorly projected medial boss. This part is broken in the right squamosal. The quadrate cannot be delimited because it is strongly fused to the squamosal. The sagittal crest is damaged, although the preserved portions show that it was moderately high and dorsally projected to the orbital roof. Anterior to the orbit, a partial suture marks the contact between the maxillary and premaxillary. Near this suture the bone is cracked and few parts are missing, encumbering the recognition of the external naris, however, no other anatomical cavity is evident in this portion, indicating that the external naris is likely anterior to the maxillary-premaxillary suture. The maxillary preserves thirteen teeth. Tooth preservation is variable, with a few of them still on anatomical position and keeping their crowns, while others are broken, eroded or missing. Few teeth show part of the lingual enamel, and in most cases, this is eroded. The lingual enamel has thin, soft and profuse striations. The longest preserved teeth occur anterior to the maxillary-premaxillary suture, and below the posterior margin of the orbit. The occlusal margin of the dentary is slightly sigmoidal, with a high coronoid process. Posterior to the coronoid process, the mandibular ramus is lower than the tooth row. Even though the posterior part of the mandibular ramus is cracked, at least two cracks are coincident with the sutures between surangular-angular, and between these and the dentary. The retroarticular process is incomplete.
Cervical vertebrae-The cervical vertebrae are numbered from c2 to c63 (Figs. 8A-8D). Most cervical vertebrae are free from the matrix, while a few centra remain embedded and hosted in several blocks. Due to this, c29-c35 are better observed on right view. The anterior cervical vertebrae are well-preserved, keeping their ribs and neural arches. These centra are longer than broad and as high as broad. The cervical ribs are blade-like, recurved posteriorly and they have shallow anterior processes and more extended posterior processes. In at least in the first 21 centra, the neural spines are short and have a squared outline from a lateral view. On anteriormost cervical vertebrae, the neural spine overhangs each posterior centrum by a remarkable extension of the postzygapophyses, while the prezygapophyses are short. From c10 to c15, the prezygapophyses become larger, while the posterior projection of each neural spine becomes shorter. From c20 and backwards, the neural spines are almost completely equivalent in length to the centrum, while their height is about one third larger than the centrum height. From c16 to c47, there is a drastic increase in the length with respect to the anteriormost cervicals. Several cervical vertebrae of this section are 'can-shaped', being similar to those described on AMNH 1495. Vertebra c47 is shorter than any surrounding element, suggesting the presence of a cervical node (Fig. 8C). Posterior to c48, the centra become progressively broader than long and they are all longer than high. Ten unnumbered centra were relocated based on their measurements. Few of them are fragmentary and likely belong to the posteriormost cervical vertebrae or else, to the pectorals (Fig. 8D). A total of 63 pre-dorsal vertebrae are identified in this review.
Pectoral vertebrae-Two unambiguous pectoral vertebrae were recognized based on the articulation of the rib in an intermediate position between the centrum and the neural  Welles (1943). Unnumbered centra or centra with uncertain position are labeled with letters and reordered considering their measurements (Table 4). Anatomical abbreviations: d1, first preserved dorsal; pv, pectoral vertebrae; tp, transverse process. Scale bar equals 10 cm.
arch. These pectoral vertebrae are numbered 65 and 66, respectively (Fig. 8E). The presence of at least one additional pectoral among unidentified pre-dorsal centra can be expected.
Dorsal vertebrae-Seven dorsal vertebrae and fragments of two additional dorsal vertebrae are identified. Among the best preserved elements it is possible to distinguish the presence of robust transverse processes which are oriented almost horizontal (Fig. 8F), condition which is retained at least until vertebra 71. From dorsal vertebra 72 backwards, the transverse processes are more gracile and they have a slight dorsal recurving. The ventral surface of all dorsal elements is damaged, being impossible to evaluate them. However, besides the direction of the transverse processes, the dorsal vertebrae of AMNH 5835 do not show additional distinctive features from other elasmosaurids.
Pectoral girdle-The coracoids are represented by an anterior portion and by few posterior fragments of the left one, and part of the symphyseal contact between both (Fig.  9A). Two portions allow observing most of the midline contact. There is a small anterior process that lacks contact with the scapula at the midline (no pectoral bar). It is difficult to evaluate the presence of a ventral process since the coracoid midline is dorsoventrally crushed. The posterior outline of the left coracoid is partially preserved, showing the presence of a cordiform fenestra. The posterolateral margin is rounded while the internal margin, which forms the cordiform fenestra, has a prominence. Anteriorly, the contact with the scapula leaves a narrow glenoid. The left scapula is preserved on a few fragments (Fig. 9A). It has a posterior process conformed by a recurved shaft with a shallow ventral keel (Fig. 9B). Its posterior end is expanded around twice the shaft's breadth, having two well-marked facets, one towards the coracoid and the other towards the glenoid (Fig. 9C). The dorsal process is blade-like and shorter than the ventral process (Fig. 9D). interpretation of the same. Anatomical abbreviations: hh, humeral head; dc1, distal carpal 1; dc2 + 3, distal carpal 2 + 3; h, humerus; in + ce, intermedium fused with centrale; px, phalanges; r, radius; rd, radiale; tb, tuberosity; u, ulna. Scale bar equals 10 cm. (Figs. 10A and 10B). The humerus shows a sigmoidal shaft, however, a good part of the shaft has been reconstructed, making it difficult to assure whether this feature is real or an artifact of the reconstruction. From a proximal view (Fig. 10C), the humeral head is rounded, while the tuberosity is prominent with respect to the former. Distally, the humerus has two well marked, concave articular facets. On dorsal view, both the radial and ulnar facets appear similar in length, however, from a ventral view (Figs. 10D and 10E) the radial facet appears larger. This could be the effect of taphonomic distorsion. The radius is as long as broad, with a convex preaxial margin and a medial notch on its postaxial margin. The ulna is represented by a small proximal fragment insufficient for the evaluation of its outline. The radiale has a subrectangular outline with its preaxial margin slightly concave. The anterior half of the intermedium + centrale is also preserved, showing distinctive facets for the radius, radiale, and distally, for the distal carpal 2+3. Distal carpals 1 and 2+3 only preserve their posterior portion. Distal blocks of the forelimb preserve indeterminate bony elements as well as phalanges, which are elongated and dorsoventrally flattened.

Forelimb-The left forelimb lacks its distal phalanges
Ribs-Isolated ribs are found among the material (Fig. 11A). The longest elements, likely from the central part of the trunk, have a rounded to oval cross-section, while the posterior dorsal ribs have a posterodorsal keel that turns into a sharp ridge. These ribs are proximally straight (horizontal) and medially, they become dorsally convex.
Gastroliths-Twenty-four gastroliths are associated to the AMNH 5835 (Fig. 11B). Their size varies from almost decimetric clasts to smaller rocks around 10 mm. Larger clasts are subrounded, with some edges still prominent. Smaller clasts are rounded and few of them are oval. There is no taphonomic information regarding the anatomical position of these elements in the fossil.

DISCUSSION
Anatomical reassessment of AMNH 1495 elements-58 cervical vertebrae, fifteen dorsal vertebrae, three sacral vertebrae and twenty caudal vertebrae of AMNH 1495 were found, adding up to a total of 98 vertebrae. Welles (1952: p. 61) indicated a total of 104 vertebrae for this specimen, plus 7 probably missing. Thus, 6 centra seem to be lost. The three pectorals and three anterior dorsals here reported as missing could potentially account for the extra vertebrae reported by Welles (1952). The total number of cervical vertebrae cannot be determined. Welles (1952) reported that at least one anterior cervical vertebra (aside from the atlas-axis) is missing. Also, posterior cervicals are unordered and unnumbered; a few of them are partially covered by the matrix or else are fragmentary. Finally, the pectoral vertebrae are missing. This makes it difficult to evaluate the continuity of the axial skeleton between the neck and the trunk. AMNH 1495 possesses 58 or more cervical vertebrae, but the precise number is uncertain.
The two preserved propodials of AMNH 1495 are here identified as the femora, while the elements of the forelimb previously described by Watson (1924), Welles (1943: Fig. 29) and Welles (1952: Fig. 4B) were not found among the material. Welles (1952: Fig. 4B) described the forelimb of AMNH 1495 being composed of: a humerus articulated with the radius, a partial ulna and the radiale. In the first description of 'Hydralmosaurus' (Welles, 1943: Fig. 29) the humerus of that forelimb appears with a postaxial distal margin shorter than that illustrated later, in 1952. Among the schemes of AMNH 5835, holotype of Styxosaurus browni (Welles, 1952 : Fig. 7), a remarkably similar forelimb was displayed, which preserves precisely the same elements (humerus, radius and radiale) described for AMNH 1495, even with the very same damaged margins. The humeri in both images (Welles, 1952: Figs. 4B and 7) have a sigmoidal shaft and a remarkably extended postaxial distal margin. In the first mention of AMNH 1495, Cope (1877: p. 580) states the following: ''The anterior limbs are a little the larger. The humerus is very robust; its shaft is subcylindric, and the distal extremity is greatly expanded, so that the width is but little less than the length. The proximal end of the shaft continues in a plane without curvature, which terminates in a broadly truncate tuberosity with prominent lateral ridges''. This description explicitly indicates that the shaft is straight (''without curvature''). Considering this, the outline proposed by Welles (1952: Fig. 4B) was likely confused with the forelimb of AMNH 5835.
Regarding the pelvic girdle, the outline of the pubis cannot be verified on the grounds of the available material.
Taxonomical reassessment of AMNH 1495-The first distinction of AMNH 1495 from other plesiosaurians was proposed by Cope (1877: p. 578, 579). During that time, the only plesiosaurian with closer affinities to AMNH 1495 was ANSP 10081 (type of Elasmosaurus platyurus). Cope noted several differences between the cervical vertebrae of both specimens, most of them regarding their proportions among equivalent elements of the neck. AMNH 1495 had shorter cervical vertebrae; this specimen also lacked a ''longitudinal lateral angle'' (=lateral keel) in the last eighteen cervical vertebrae. Based on this, Cope erected a new species, 'Elasmosaurus serpentinus' (Cope, 1877). Welles (1943) erected a new genus, Hydralmosaurus, considering AMNH 1495 as its type species and proposing the new combination H. serpentinus. Diagnostic features of this genus and species included the absence of pectoral and pelvic bars, the absence of a lateral keel on posterior cervical vertebrae, the presence of cordiform fenestra on the coracoids, pubes with a concave anterior border, a humeral head well separated from the tuberosity, and a well developed epipodial foramen. The absence of pectoral and pelvic bars is a common feature present in many adult elasmosaurids worldwide (Hector, 1874;Hutton, 1893;Colbert, 1949;Welles, 1943;Welles, 1952;Welles, 1962;Hiller et al., 2005;Otero, Soto-Acuña & Rubilar-Rogers, 2012;Otero et al., 2014c). A similar case occurs among the pelvic girdles of elasmosaurids. Due to this, the absence of pectoral and pelvic bars in AMNH 1495 cannot be considered as diagnostic to genus or species level.
On the other hand, the presence of lateral keels on the cervical vertebrae is a variable feature within elasmosaurids. It may vary among taxa, but the real diagnostic value of this character needs to be established on the grounds of complete necks of adult individuals, because this feature varies during ontogeny and along the neck. In addition, the presence of a humeral head well separated from the tuberosity is a feature also present in many elasmosaurids worldwide (Welles, 1962;Sato, 2003;Hiller et al., 2005;O'Gorman, Gasparini & Salgado, 2013;Otero, O'Gorman & Hiller, 2015) and should be rejected as diagnostic. A similar case happens with the epipodial foramen, present in many elasmosaurids (S. browni, C. colombiensis, Morenosaurus stocki, SDSM 451, among others) but absent in others as well (CM Zfr 115, Aristonectes parvidens, Aristonectes quiriquinensis, among others). Thus, such feature can be taxonomically useful but it is not diagnostic to genus level. Then, the combination of characters proposed by Welles (1943) can be found in various elasmosaurids. This is the reason why a new set of diagnostic characters is here presented (see 'Systematic Paleontology').
In addition, Carpenter (1999) considered the presence of 63 cervical vertebrae on AMNH 1495 (here reduced to at least 58 verified cervical vertebrae) as a diagnostic feature of the species 'Hydralmosaurus serpentinus', separating it from other elasmosaurids such as S. snowii, considered to have 62 cervical vertebrae based on referred specimens but having only 28 in the holotype. He also considered as diagnostic features a humerus with a pronounced posterior expansion on its distal end (only verifiable on AMNH 5835 and missing on AMNH 1495), and the presence of pectoral and pelvic bars, a feature widely present in known elasmosaurids. Thus, all the features considered by Carpenter (1999) cannot be currently considered as diagnostic to genus nor species level.
The hindlimb of AMNH 1495 is unique among known elasmosaurids, due to the presence of a fibula with a deep concave postaxial margin, likely for accommodating a sesamoid element, along with the presence of a sesamoid fused to the postaxial margin of the fibulare. Although the latter feature could occur among other elasmosaurids, this is the first documented case where both elements are fused but still clearly visible. The presence of a sesamoid settled in an intermediate position between the fibula and the fibulare, as well as a second sesamoid related only to the fibulare, also occurs in the forelimb of Terminonatator pointeixensis (Sato, 2002: Fig. 2.5;Sato, 2003 : Fig. 13B). However, in this taxon the distal sesamoid is not fused to its ulnare, as it occurs in the fibulare of AMNH 1495. Additionally, the ilium is unique among known elasmosaurids for having a triangular outline with a recurved dorsal facet. The cervical proportions are useful for matching AMNH 1495 with the holotype of S. snowii, as well as with the holotype of S. browni. Finally, it must be addressed that the proportions of equivalent cervical elements are remarkably similar between the three specimens (Table 5). However, AMNH 1495 does not preserve enough diagnostic characters for a specific determination, and for that reason it is here referred as Styxosaurus sp. (Welles, 1943) (AMNH 5835)-As pointed in the emended diagnosis of AMNH 5835, this specimen could be included within the genus Styxosaurus, based on the close morphological affinities with the skull and cervical vertebrae of KUVP 1301 (holotype of S. snowii). However, slight differences between both skulls justify their separation as different species. Cranial differences include the presence of a jugal bar higher than that of S. snowii, a higher temporal ridge, a preorbital boss rounder and larger than that of S. snowii, a dorsal contact of squamosals not prominent with respect to the sagittal crest (which indeed occurs on S. snowii), and finally, the height of posterior process of the maxilla reaches the half of the jugal bar (contrary to S. snowii where this is one third the height of the jugal bar). On the other hand, comparison of the S. browni holotype with AMNH 1495 shows differences on the axial skeleton and mostly in the pectoral girdle. AMNH 1495 possesses a shortened centrum c35, here interpreted as a cervical node, which is absent on AMNH 5835. Also, anterior dorsal vertebrae of AMNH 1495 have transverse processes recurved dorsally in an angle between 30 • and 35 • , while in AMNH 5835 anterior dorsal vertebrae are almost horizontal, becoming slightly recurved dorsally (but below 30 • ) from middle dorsal vertebrae and backwards. Pectoral girdles differ at least in the scapula and coracoids. The AMNH 5835 scapula has a glenoid portion thicker than that of AMNH 1495, with articular facets more defined (the latter could be ontogenetic). Also, the scapular shaft is shorter on AMNH 5835 with respect to AMNH 1495. Coracoids are also different. AMNH 1495 has mid anterior processes comparatively larger and more recurved than those of AMNH 5835. On the other hand, the AMNH 5835 humerus appears as having a sigmoidal shaft, however, most of its medial portion is reconstructed, making this character at least questionable.

Re-validation of Styxosaurus browni
Differences between AMNH 5835 and KUVP 1301 have been previously addressed, mostly on the grounds of skull comparisons. Welles (1952) separated both skulls based on the presence of thirteen maxillary teeth on AMNH 5835 and fifteen on KUVP 1301.This author also considered the skull length, being 37 cm on AMNH 5835 and 42 cm on KUVP 1301, however, the snout and dentaries of the first are incomplete, and therefore, the complete skull length is a value closer to that of KUVP 1301. Welles (1952) also used the 'beak index' (42 on KUVP 1301 and 39 on AMNH 5835), defined as the ratio of the distance between the anterior border of the premaxillary to the anterior orbital border, with respect to the total length of the skull measured from the anterior border of the premaxilla until the occipital condyle. Again, this minor difference could be caused by the incomplete rostrum of AMNH 5835. Also, the maxillary tooth count difference (thirteen on AMNH 5835 versus fifteen on KUVP 1301) could reflect ontogenetic differences, loss of teeth by mechanical removal, or replacement of dental pieces. Thus, no actual autapomorphic skull features were recognized at that time between both specimens. Carpenter (1999) referred AMNH 5835 to the species 'Hydralmosaurus serpentinus' following the diagnostic features explained above. AMNH 5835 possesses 62 cervical vertebrae (numbered c2-c63 on the specimen). Indeed, 62 cervical vertebrae were regarded by the same author as a character present in Libonectes morgani, Thalassomedon haningtoni and Styxosaurus snowii (despite the fact that the holotype of the latter only preserves 28 cervical vertebrae). Once again, the real diagnostic value of the cervical count should be evaluated among specimens with complete necks. This is not the case of AMNH 5835; the posterior cervical vertebrae are difficult to interpretate and a few of them remain unnumbered. This could easily cause a difference in one cervical. Other diagnostic characters considered by Carpenter (1999) are the absence of pectoral and pelvic bar (discussed above as being the condition in most Late Cretaceous elasmosaurids) and the pronounced expansion of the humerus posterodistal margin. This latter character is indeed present on AMNH 5835.
Summarizing, it is difficult to hold a generic separation on the sole ground of a differentially elongated distal postaxial margin of the humerus. Such feature could even change throughout its ontongeny. Also, the real sigmoidal profile of AMNH 5835 humerus is at least questionable because a good deal of the shaft has been reconstructed.
On the other hand, there are evident similarities between the skulls of AMNH 5835 and KUVP 1301. Despite the fact that AMNH 5835 is laterally crushed and KUVP 1301 is dorsoventrally compressed, both have congruent lengths and possess a similar reniform orbit. In the case of KUVP 1301, the latter is dorsally collapsed, deforming the dorsal outline. This was misinterpreted by Carpenter (1999: Fig. 10) who considered the orbit as being almost rounded, with the external naris placed immediately anterior to the latter. Both structures are indeed the orbit, while the external naris of KUVP 1301 is obscured by the crushing and is placed likely near the maxillary-premaxillary suture. Another common feature in both skulls is the presence of a posterior boss on the squamosal. Carpenter (1999: Fig. 7) described the squamosal as being posteriorly straight. This prominent process is broken on the right squamosal of AMNH 5835, however, it is visible on their left one, being very similar to that observed on KUVP 1301. Also, both skulls possess a singular structure on the dorsal margin of the temporal bar, here nominated as temporal ridge, that is higher on AMNH 5835. Another interesting feature is the common presence of a preorbital boss in both skulls, although, it is not clear if this could be taphonomic or not. A scheme of both skulls is provided (Fig. 12) and complemented with a third taxon here included in the Styxosaurinae, Terminonatator pointeixensis. The scheme shows general affinities between these taxa despite their evident differences in size. It must be noted that the preorbital boss in the latter is not observed.
Phylogenetic analysis-Analysis of the dataset of Benson & Druckenmiller (2014), plus the thirteen additional elasmosaurid OTUs here added, was first performed using implied weighting (K = 3; New Technology Search, Tree Fusing). This returned one most parsimonious cladogram (CI = 0.27; RI = 0.68; 2,511 steps). All the taxa here referred to the Styxosaurinae were recovered in a single branch (Data S1, Fig. 1). A second analysis considered Bootstrap support (2000 replicates, Standard, New Tech Search, Tree fusing) which was applied to the same datamatrix. This returned good stability for the Styxosaurinae (Data S1, Fig. 2). The congenerity of AMNH 1495, AMNH 5835 and Styxosaurus snowii is well supported too. The clade Elasmosauridae was returned as unstable.
A third analysis pruned the fragmentary elasmosaurid Wapuskanectes betsynichollsae (86.7% of missing data) and the Speeton Clay Plesiosaurian (63.3% of missing data). On the other hand, the specimen GWWU.A3.B2, returned within the Elasmosauridae by Benson & Druckenmiller (2014), was described in detail by Hampe (2013) who identified as a new genus and species, Gronausaurus wegneri. This taxon shows affinities to Brancasaurus brancai, and it was subsequently referred to the Leptocleidia. Thus, it is evident that the phylogenetical position of this specimen needs to be revised. Due to this, this taxon was pruned from subsequent analysis. In addition, few unstable taxa detected in preliminary resamplings and within the Cryptoclidia were pruned. These are 'Cimoliasaurus' valdensis, 'Plesiosaurus' mansellii, Abyssosaurus nataliae and Speeton Clay Plesiosaurian. As a result of excluding these six taxa, several clades within the Cryptoclidia were returned with enough support. The clades Elasmosauridae (57%), Leptocleididae (80%), Polycotylidae (98%) and Cryptoclididae (72%) were returned with enough stability. The clade Styxosaurinae returned 87% of support. Congenerity of AMNH 5835, AMNH 1495 and Styxosaurus snowii returned 81% (Data S1, Fig. 3). Based on the last analysis, a time-callibrated cladogram is proposed (Fig. 13A).
Bivariate analysis-Plotting of adult or near adult elasmosaurids from the Weddellian Biogeographic Province, the Western Interior Seaway and a single sub-equatorial taxon (C. colombiensis) returned interesting patterns. Graphic relationships of VLI versus HI, VLI versus BI, and HI versus BI (Fig. 13B) show disparate neck types among aristonectines and styxosaurines in all cases. The first are characterized by low VLI and high HI and BI values, reflecting the possession of cervical centra shortened with respect to all other elasmosaurids. On the other hand, styxosaurines display the highest VLI and low BI and HI values, thus, reflecting that their cervical vertebrae include the longest centra among elasmosaurids. Such disparate vertebral types only occur in partial segments of the neck. Among aristonectines, Aristonectes quiriquinensis has shortened cervical vertebrae between c27 and c30; Aristonectes parvidens shows shortened centra on c2, c6, c7, c11 and c18; Kaiwhekea katiki has shortest centra on c5-c7, however, VLI values for the rest of the neck are unavailable because the state of preservation. This made the evaluation of the breadth of most centra difficult. All the cervical vertebrae of Morturneria seymourensis have a disparate plotting, but their position along the neck is uncertain. In the case of styxosaurines, the most elongated cervical vertebrae of Styxosaurus browni are c11-c20; Elasmosaurus platyurus has its longest cervical vertebrae at least between c24 and c47; in the case of AMNH 1495 its longest cervical vertebrae are between c23 and c30. These values evidence that even among closely related forms, cervical elongation or shortening occurred in variable amounts and among different cervical elements. It is possible that such variation could be taxonomically helpful, however, such comparison should be attempted only between complete necks.
An interesting pattern is visualized in the plotting of AMNH 2554 (type of 'Cimoliasaurus magnus'), CM Zfr 115, Callawayasaurus colombiensis, Hydrotherosaurus alexandrae, SGO.PV.6506 and Thalassomedon haningtoni. All these specimens share cervical vertebrae with a low dispersion (distance between plotted points of a single taxon), indicating that variation among cervical elements (elongation or shortening) is not as marked as in styxosaurines or aristonectines. This suggests that such kind of vertebrae could represent a plesiomorphic condition from which both disparate groups derived. In this sense, Otero et al. (2015a) proposed an informal group for reuniting specimens possessing such kind of cervical vertebrae, naming it 'plesiomorphic elasmosaurids' in order to distinguish them from aristonectines and from 'extremely long-necked elasmosaurids'. These authors recognized a separation of these three groups among juvenile and especially among adult individuals.
Cervical vertebral morphotypes within the Elasmosauridae-This study only considered adult specimens with fairly complete necks, aiming to avoid changes due to different ontogenetic stages. Intracolumn variation was treated in the bivariate analysis, identifying the most disparate elements on each taxon. Finally, in order to help to the taxonomic variation, and based on the information exposed above, this research proposes the 'Cimoliasaurus'-grade cervical morphotype. This is not a valid taxonomical group; indeed, it is clearly paraphyletic. Such separation, based on cervical proportions, was noted even in the early years of vertebrate paleontology by Cope (1868) and Leidy (1870a;Leidy, 1870b). Such cervical vertebrae were frequently discussed during the 20th century (Welles, 1943;Welles, 1952;Welles, 1962;Persson, 1960;Persson, 1963). This morphotype even led to the coining of a new family of plesiosaurians, the 'Cimoliasauridae' (DeLair, 1959). This morphotype is also coincident with the concept of non-elongate taxa of O' Keefe & Hiller (2006) and with the 'plesiomorphic' elasmosaurids proposed by Otero et al. (2015a). Following O'Keefe & Street (2009), it is clear that 'Cimoliasauridae' is a junior synonym of Elasmosauridae, while 'Cimoliasaurus magnus' is a void name and its type specimen, AMNH 2554, an indeterminate elasmosaurid. Cervical vertebrae with similar proportions have been frequently found throughout the whole Cretaceous and distributed worldwide. This 'Cimoliasaurus'-grade cervical morphotype indeed occurred associated to Campanian styxosaurines on the Western Interior Seaway, and was found associated to Maastrichtian aristonectines on the Weddellian Biogeographic Province. The phylogenetic hypothesis here obtained shows that different taxa of elasmosaurids with 'Cimoliasaurus'-grade cervical vertebrae are sister taxa of the styxosaurines and the aristonectines. Furthermore, this cervical morphotype is already present on basal elasmosaurids (Fig. 14A), however, the relationships between different taxa other than styxosaurines and aristonectines are still unclear. Interestingly, the oldest plesiosaurian records with 'Cimoliasaurus'-grade cervical vertebrae are mostly restricted to the Southern Hemisphere during the Lower Cretaceous (Kear, 2002;Lazo & Cichowolski, 2003;O'Gorman et al., 2015a), with one known exception in the upper Hauterivian of Germany (Sachs et al., 2015). This reached an sub-equatorial distribution during the 'middle' Cretaceous (Welles, 1962;Carpenter, 1999) and acquired a worldwide distribution during the Late Cretaceous (Fig. 14B), being present until the K/Pg boundary (Hiller et al., 2005;Otero et al., 2014a). Furthermore, an articulated cervical series from Oxfordian beds of northern Chile (MUHNCAL.20174) has similar morphologies and cervical indices and it could represent the oldest known elasmosaurid (Otero et al., 2015b).
As a result, three main morphotypes of cervical vertebrae are recognized among elasmosaurids. (i) 'Cimoliasaurus'-grade cervical vertebrae, explained above, characterized by centra similarly larger than high and broader than long or high (Fig. 15A). This type occurs on all or most of the cervical vertebrae of a single individual; (ii) ''can-shaped'' cervical vertebrae. This follows the concept of 'elongate-taxa' by O' Keefe & Hiller (2006) and the extreme long-necked elasmosaurids by Otero et al. (2015a). These are disparate elements frequently occurring in the mid-part of the neck, having centra almost twice as long as they are high and with heights similar to their breadth (Fig. 15B). These cervical vertebrae are typical of styxosaurines; finally, (iii) the aristonectine-type cervical vertebrae, which are also disparate elements drastically shortened, indistinctly occurring in the anterior, middle or posterior part of the neck and likely varying between aristonectine taxa. This type of cervical vertebrae conforms most of the neck in adult aristonectines, however, they can eventually occur in a few cervical vertebrae of immature or young elasmosaurids with 'Cimoliasaurus'-grade proportions (i.e., AMNH 5621, the very juvenile holotype of 'Leurospondylus ultimus ' Brown, 1913). Thus, suggesting a paedomorphic origin of the aristonectines. These are characterized by centra about twice as broad as they are long and higher than they are long (Fig. 15C). It must be stated that among cervical vertebrae of both styxosaurines and aristonectines, some cervical centra can possess proportions similar to 'Cimoliasaurus'-grade cervical vertebrae. This is evident in the bivariate analysis, and because of it, the morphological distinction of these three cervical types considers only disparate centra. The transverse presence of 'Cimoliasaurus'-grade cervical vertebrae among basal elasmosaurids as well as in the clades Styxosaurinae and  Aristonectinae strongly supports this cervical type as a plesiomorphic feature, which was variably retained in different sections of the neck of different elasmosaurid taxa. In addition, fairly complete individuals possesing exclusively 'Cimoliasaurus'-grade cervical vertebrae without disparate elements are present since the Upper Jurassic (e.g., MUHNCAL.20174) until the Maastrichtian (e.g., CM Zfr 115, Hydrotherosaurus alexandrae). This indicates that the most common cervical type among elasmosaurids is indeed the 'Cimoliasaurus'-grade morphotype, while disparate styxosaurine-and aristonectine-types are derived features acquired separately in representatives with biogeographical affinities.
Axial formula-The real number of cervical vertebrae among elasmosaurids from the Western Interior Seaway has been discussed above, however, most of the diagnostic specimens possess fairly complete necks with few centra that could be missing in each case. Thus, the following analysis regarding their axial formulae is not absolute in terms of Table 6 Axial formulae of different plesiosaurians. Axial sections with known missing centra are denoted with a (+) following the number of preserved centra. cervical count, but it is informative in terms of general axial changes. Table 6 summarizes the vertebral count of different plesiosaurians with fairly complete skeletons. As a first approach, it is evident that neck elongation occurred among different plesiosaurian lineages in different lapses. Lower Jurassic microcleidids such as Microcleidus tournemirensis (Sciau, Crochet & Mattei, 1990) acquired long necks with 41 cervical vertebrae. However, the pectoral and dorsal number on this species is similar to those found in derived lineages. Upper Jurassic-Lower Cretaceous cryptoclidids also have an event of neck elongation represented by Spitrasaurus spp., reaching the remarkable number of 60 cervical vertebrae, a character classically regarded only to elasmosaurids (Carpenter, 1999). Even among polycotylids events of neck elongation existed, evidenced by Thililua longicollis Bardet, Pereda-Suberbiola & Jalil, 2003, which has 30 cervical vertebrae. Thus, besides Elasmosauridae, neck elongation occurred at least three times and at least in three different clades (microcleidids, cryptoclidids and polycotylids). Within the clade Elasmosauridae, the drastic neck elongation is represented by styxosaurines, but it is also present in representatives with 'Cimoliasaurus'-grade cervical vertebrae possessing cervical counts greater than 50. This points to at least two different events for elasmosaurid neck elongation. A possible third event might be represented by the Speeton Clay plesiosaurian, which preserves only 23 cervical vertebrae. However, these have proportions remarkably similar to styxosaurines. Considering these (at least) three events within Elasmosauridae, the evolutionary history of plesiosaurians has at least six documented events of neck elongation, and at least one event of neck shortening, the latter derived from ancestors with long necks, as is the case of aristonectines.
The pectoral and caudal counts of elasmosaurids seem to be scarcely modified and vary between three to five on each case. However, dorsal count among elasmosaurids varies between 17 and 25. Most basal and also complete elasmosaurid skeletons such Callawayasaurus colombiensis andThalassomedon haningtoni have 23 and 25 dorsal vertebrae, respectively. On derived elasmosaurids, this number is reduced to 17-19. Such number is present on Futabasaurus suzukii, Hydrotherosaurus alexandrae, Elasmosaurus platyurus, Albertonectes vanderveldei, AMNH 1495, CM Zfr 115, and Terminonatator pointeixensis. With the exception of Futabasaurus which has an incomplete neck, all these specimens show a high number of cervical vertebrae coupled with a reduction of the plesiomorphic dorsal count from 23-25 to 17-19 centra. Among the latter taxa, with the exception of the unknown total of F. suzukii, all of them possess at least 51 cervical vertebrae. Based on the studied axial formulae (Table 6), a variable estimation of five to eight post-cervical centra are added to the neck in derived elasmosaurids. This evidence also supports that the highest cervical counts are not only the result of this homeotic shifting, but also a result of the acquisition of additional cervical centra.
Based on the axial formula of sister taxa of the Elasmosauridae, an estimated expected formula for an hypothetic basal elasmosaurid can be proposed (Fig. 16A), with 35 or more cervical vertebrae, 23-25 dorsal vertebrae and 25 or more caudal vertebrae. The 'mid' Cretaceous C. colombiensis and T. haningtoni retained such postcervical formula with a minor reduction of the caudal count (at least on T. haningtoni; unknown on C. colombiensis), however, their necks became larger through the acquisition of additional cervical vertebrae, reaching more than 56 (Fig. 16B), but without acquiring very elongated centra ('can-shaped') in some parts of the neck. A second event is represented by Late Cretaceous (Santonian-Maastrichtian) elasmosaurids such Futabasaurus suzukii (Japan), Hydrotherosaurus alexandrae (California) and CM Zfr 115 (New Zealand). In these forms, a homeotic shifting occurs on pectoral and anterior dorsal vertebrae, which passes onto the neck, increasing the cervical count. The caudal count is mostly retained (Fig. 16C). Another condition, likely derived from the second event (C), is represented by the most extreme neck elongation due to the acquisition of additional cervical vertebrae, but retaining the dorsal count of the event (C). Coupled to this is the acquisition of elongated cervical vertebrae ('can-shaped'). The caudal count is also increased, giving these forms the most extremely elongated aspect among elasmosaurids (Fig. 16D). Examples of this are all the styxosaurines (i.e., Styxosaurus spp., Elasmosaurus platyurus, Albertonectes vanderveldei and Terminonatator pointeixensis). Finally, another event occurred during the Maastrichtian and is represented by a homeotic shifting of the trunk in the anterior direction. This caused a reduction of the cervical count below 45, the increasing of the dorsal count to 23-25 (recovering the ancestral condition) and the increasing of the caudal count to 35.  (C) Santonian-Maastrichtian neck elongation by homeotic shifting of anteriormost dorsals and pectorals into the neck, with a reduction of the dorsal to 17-19 centra, and by acquisition of few additional cervical centra. This seems to be the case of Futabasaurus suzukii (the neck is incomplete), Hydrotherosaurus alexandrae and CM Zfr 115. (D) Campanian extreme neck elongation event due to the combined effect of the homeotic shifting of anteriormost dorsals and pectorals into the neck, causing a reduction of the dorsal count to 17-19 centra; also coupled to the acquisition of several additional cervical centra, and by the acquisition of extremely elongated individual centra ('can-shaped' cervicals). Caudal count is also increased. Examples of this are all the Styxosaurines. (E) Maastrichtian shortening event associated to a homeotic shifting of the trunk, leaving 45 cervicals, 23-24 dorsals and 35 caudals. Centra also become very short and very broad. Examples of this are all the aristonectines. The plesiomorphic dorsal count is recovered, however, the total axial count is remarkably similar to the case (C). Thus, aristonectines are likely derived from elasmosaurids with 'Cimoliasaurus'-grade cervicals.
disparate elements ('can-shaped' cervical vertebrae); both taxa possess more than 60 cervical vertebrae, and furthermore, both taxa have pectoral girdles with large scapulae and large, well-ossified claviculae and interclavicular. A second stage within the Western Interior Seaway is represented by the styxosaurines, which acquired the most elongated necks among plesiosaurians. All of them are Campanian, all of them likely have more than 60 cervical vertebrae, and more than 70 in some taxa, and they are also characterized by possessing disparate 'can-shaped' mid-cervical vertebrae. Finally, all styxosaurines preserving the pectoral girdle lack a pectoral bar, they possess large scapulae, and likely have reduced or poorly ossified clavicle/interclavicular (Welles, 1943;Welles, 1949). Lower Cretaceous, subequatorial elasmosaurids are still scarcely known in terms of diversity, however, they are represented by a highly informative taxon, C. colombiensis. This taxon possesses axial and pectoral features that appear as an intermediate between Leptocleidia and the 'mid' Cretaceous elasmosaurids from the Western Interior Seaway (i.e., T. haningtoni and L. morgani).
On the other hand, Late Cretaceous elasmosaurids from the Pacific Realm with wellpreserved skeletons (e.g., Hydrotherosaurus alexandrae, CM Zfr 115) possess necks with more than 60 cervical vertebrae, they are all restricted to the Santonian-Maastrichtian, and they do not possess 'can-shaped' cervical vertebrae nor a pectoral bar, while the interclavicular and clavicles seem to be non-ossified or even absent.
Finally, aristonectines are restricted to the upper Campanian-Maastrichtian. They represent a late stage in elasmosaurid evolution. These animals possess disparate cervical vertebrae that are shorter and broader than other elasmosaurids; they also have shortened necks through a reduction of the cervical count, they possess large heads, axially elongated bodies, large extremities and elongated tails. Aristonectines are not closely related to styxosaurines. Each lineage evolved independently. The evidence here presented suggests that both clades evolved from different elasmosaurid ancestors with 'Cimoliasaurus'-grade cervical vertebrae. Prior to the Campanian (time lapse estimated for the divergence of each clade), the latter forms were abundant and widely spread along the Pacific and the Western Interior Seaway, respectively.
Chronologically, the earliest elasmosaurid occurrence are likely represented by postcranial material from the Oxfordian of northern Chile (Otero et al., 2015b). Lower Cretaceous records include the Hauterivian 'Speeton Clay plesiosaurian' from Yorkshire, U.K. (Benson & Druckenmiller, 2014). South American records include upper Valanginianlower Hauterivian elasmosaurids with cervical vertebrae referable to the 'Cimoliasaurus'grade morphotype (O'Gorman et al., 2015b). Cervical vertebrae with the same proportions have been reported from the Aptian of New South Wales, Australia (Kear, 2002). The morphotype persists through the 'middle' Cretaceous and is represented by specimens from the upper Albian of Queensland, Australia (Kear, 2001), by Callawayasaurus colombiensis from the lower Aptian of Colombia (Welles, 1962), and by the Cenomanian-Turonian, indeterminate elasmosaurid AMNH 6796 (type of 'Alzadasaurus tropicus ' Colbert, 1949). The oldest records within the Western Interior Seaway are represented by two taxa with 'Cimoliasaurus'-grade cervical vertebrae, these being the lower Cenomanian T. haningtoni (DMNH 1588) and the Turonian L. morgani (SMU SMP 69120) (Welles, 1943;Welles,  Regarding typical Campanian elasmosaurids from the Western Interior Seaway, an unambiguous type of cervical vertebrae is noted to occur in variable positions among the neck. Such vertebrae are here called ''can-shaped'' cervical morphotype, being almost twice as long as they are high and with similar height and breadth. The 'can-shaped' cervical morphotype does not occur in elasmosaurids outside the Western Interior Seaway. Additional support based on phylogenetic and bivariate analyses allows proposing a new clade for these extreme elasmosaurids, here named Styxosaurinae. On the other hand, this research identifies a plesiomorphic cervical type characterized by centra that are about two times broader than high and similarly as high as they are broad. This kind of cervical vertebrae were historically referred as typical of the genus 'Cimoliasaurus' and later considered typical of the clade 'Cimoliasauridae' (both taxa currently considered as nomina dubia). This study recuperates this morphological concept, coining the 'Cimoliasaurus'grade cervical morphotype in reference to the first description of those vertebrae in AMNH 2554 (type of 'Cimoliasaurus magnus ' Leidy, 1851, currently nomen dubium). With the exception of styxosaurines and aristonectines, the 'Cimoliasaurus'-grade cervical morphotype is the most common condition among elasmosaurids. Furthermore, this type of cervical vertebrae is present along the whole neck in non-aristonectine and non-styxosaurine elasmosaurids, having a low dispersion in their cervical proportions as shown here by means of bivariate analysis. Then, Elasmosaurus platyurus (ANSP 10081), the name-bearing specimen of the Elasmosauridae, is actually a highly derived, endemic elasmosaurid of the Western Interior Seaway, and indeed represents an unusual form among elasmosaurids.
During the evolutionary history of Elasmosauridae, neck length suffered changes on different time lapses. This research shows at least three events of neck variation, represented by a 'mid' Cretaceous elongation event along the southern Western Interior Seaway and the subequatorial realm linked to an increased cervical number (56 or more), a retention of the plesiomorphic dorsal count (23-25), and the presence of pectoral girdles with pectoral bar and massive interclavicular, claviculae and scapulae. Examples of this are the Aptian Callawayasaurus colombiensis, the Cenomanian Thalassomedon haningtoni and the Turonian Libonectes morgani (also, likely Wapuskanectes betsynichollsae but its neck is incomplete). A second event of neck length variation is represented by the styxosaurines of the Western Interior Seaway that acquired the most extreme necks among elasmosaurids through a drastic increasing of the cervical count (60-76), coupled with homeotic shifting of pectoral and anterior dorsal vertebrae (dorsal count falls to [17][18][19], and also with pectoral girdles with comparatively reduced interclavicular, clavicle and scapulae. Along the Pacific realm, Late Cretaceous elasmosaurids show a trend to reduce the size of the scapulae, the interclavicular and the claviculae, while among latest Pacific elasmosaurids these elements were not even ossified and could be eventually lost. Among the latter group, a third event of neck length variation is represented by the aristonectines which suffered a reverse shifting with cervical vertebrae passing into the trunk (cervical count falls to 43-45), coupled with an increase of the dorsal count (23-25) as well as the caudal count (35). A likely additional length variation event within the Elasmosauridae May have occurred in the case of the Speeton Clay plesiosaurian and closely related forms, albeit at the moment these are poorly known.

AMNH
American Museum of Natural History, New York, United States AM Australian Museum, Sydney, Australia ANSP Academy of Natural Sciences of Philadelphia, United States BRSMG Bristol City Museum and Art Gallery, Bristol, UK