Thermal Tensile, and Dynamic Mechanical Properties of PVDF/FKM Blends in Different Curing Systems

Mojtaba Deilamy Moezzi; Mohammad Karrabi; Yousef Jahani

doi:10.7317/pk.2017.41.2.250

주제분류

...

저널정보

한국고분자학회
폴리머 학술저널
폴리머 제41권 제2호
2017.3 250 - 259 (10page)
DOI : 10.7317/pk.2017.41.2.250

저자정보

Mojtaba Deilamy Moezzi (Iran Polymer and Petrochemical Institute)
Mohammad Karrabi (Iran Polymer and Petrochemical Institute)
Yousef Jahani (Iran Polymer and Petrochemical Institute)

이용수
내서재: 0

내서재에 추가
되었습니다. 내서재에서
삭제되었습니다.

초록·키워드

오류제보하기

Blends of poly(vinylidene fluoride) (PVDF) and fluororubber (FKM) were prepared in an internal mixer by dynamic vulcanization. The effect of FKM, with and without curing system, was studied with respect to the properties of the PVDF/FKM blends. The tensile test showed that the tensile strength and modulus decreased after blending but the elongation-at-break naturally increased because of the presence of rubber in PVDF matrix. The differential scanning calorimetry (DSC) test gave good indications of improved state of miscibility in most blend ratios. The increase of FKM content showed a favorable tendency of PVDF component toward crystallization. The incorporation of FKM as a coblend improved the thermal stability of PVDF, and the temperature at 10% weight loss of the blends increased. This was confirmed by one value of glass transition temperature obtained from DMTA test, which indicated two different values for pure polymers. The rheological tests showed that the complex viscosity and storage modulus of the blends increased with increasing frequency.

#poly(vinylidene fluoride) #fluororubber #blends #dynamic vulcanization #thermal analysis