- citati u SCIndeksu: 0
- citati u CrossRef-u:[4]
- citati u Google Scholaru:[]
- posete u poslednjih 30 dana:43
- preuzimanja u poslednjih 30 dana:28
|
|
|
Tehnologija bušenja sa kolonom zaštitnih cevi
Review of casing while drilling technology
Sažetak
Konvencionalne metode bušenja se suočavaju sa raznim operativnim i finansijskim izazovima poput troškova nabavke, inspekcije, održavanja i transporta opreme za bušenje, a najviše sa konstantnim manevrom bušaćeg alata bilo da je potrebno da se proradi izbušeni interval, da se zameni kompozicija teškog alata ili po dostizanju konačne dubine bušotine. Konstantan manevar bušaćeg alata doprinosi ne samo povećanju neproduktivnog vremena već i poteškoćama prilikom bušenja, ukljućujući i nestabilnost kanala bušotine kao i gubitak cirkulacije. Svi navedeni problemi doveli su do razvoja novih rešenja i metoda među kojima se posebno istakla nova metoda bušenja - metoda bušenja kolonom zaštitnih cevi (casing while drilling). Casing while drilling metoda objedinjuje proces bušenja i cementacije bušotina i na taj način rešava probleme konvencionalnog bušenja. Ovaj rad opisuje novu metodu bušenja pomoću kolone zaštitnih cevi - casing while drilling (CwD) kao i njenu praktičnu primenu u procesu bušenja. izvršeno je poređenje konvencionalne metode bušenja i CwD metode i iz svih opisanih studija slučaja ustanovljeno je da CwD metoda pruža bolje performanse od konvencionalnog bušenja.
Abstract
Conventional drilling methods have been plagued with huge operational and financial challenges, such as cost of purchasing, inspecting, handling, transporting the drill equipment and most importantly, tripping in-and-out of the drill string whenever the Bottom Hole Assembly (BHA) needs a replacement, needs of wiper trip or when total depth is reached. The tripping in-and-out of the drill string not only contributes to Non Productive Time (NPT) but also leads to well control difficulties including wellbore instability and lost circulation. All this has led Oil and Gas industry, as well as any other engineering industry, to seek for new ways and methods in order to reduce these problems. Thanks to the advances in technical solutions and constant improvements of conventional drilling methods, a new drilling method - casing while drilling has been developed. Casing Drilling encompasses the process of simultaneously drilling and casing a well, using the active casing and thus optimizes the production. This paper presents a review of casing while drilling method (CwD) and its practical usage in drilling wells. The comparison of conventional drilling method and casing while drilling is also presented. The CwD method achieves significantly better results than conventional drilling method.
|
|
|
Reference
|
|
Abubakar, M., Chika, J.O., Ikebudu, A.O. (2012) Current Trends and Future Development in Casing Drilling. International Journal of Science and Technology, 2(8), pp. 567-582
|
|
Buntoro, A. (2008) Casing drilling technology as the alternative drilling efficiency. u: IADC/SPE Asia Pacific drilling technology Conference and Exhibition, held in Jakarta, Indonesia, 25-27. August 2008, SPE
|
|
Fontenot, K.R., i dr. (2005) Using casing to drill directional wells. Oilfield Review, 17(2), pp. 44-61
|
|
Gaurina-Međimurec, N. (2005) Casing Drilling Technology. Rudarsko-geološko-naftni zbornik, 17(1), pp. 19-26
|
|
Halliburton (2016) Floating equipment. [Online] Halliburton. Available from: http://www.halliburton.com/en-US/ps/cementing/casing-equipment/floating-equipment/default.page?node-id=hfqela4z [Accessed 03/08/16]
|
|
Houtchens, B., Foster, J., Tessari, R. (2007) Applying risk analysis to casing while drilling. u: The SPE/IADC Drilling Conference, held in Richardson, Texas, 20-22. February 2007, SPE, Proceedings at
|
|
Kerunwa, A., Anyadiegwu, C.I.C. (2015) Overview of the advances in casing drilling technology. Petroleum & Coal, 57(6), pp. 661-675
|
|
Lesso, B., Strickler, R., Warren, T. (2005) Combining casing drilling, rotary steerable proves effective in directional application. Drilling Contractor, 61(6), pp. 63-67
|
|
Sánchez, F.J., Said, H., Turki, M., Cruz, M. (2012) Casing While Drilling (CwD): A New Approach To Drilling Fiqa Formation in he Sultanate of Oman--A Success Story. SPE Drilling & Completion, 27(02): 223-232
|
|
Schlumberger (2013) Hydro-formed casing centralizer. [Online] Schlumberger. Available from: http://www.slb.com/~/media/Files/drilling/product_sheets/drilling applications/casing_hydro_form_centralizers_ps.pdf [Accessed 01/08/16]
|
|
Shepard, S.F., Reiley, R.H., Warren, T.M. (2001) Casing Drilling: An Emerging Technology. u: SPE/IADC Drilling Conference, 27th February - 1st March
|
|
TESCO (2016) Casing drive system. [Online] Tesco. Available from: http://www.tescocorp.com/Rentals/Casing_Running Tools/Casing Drive System.aspx [Accessed 03/08/16]
|
|
Tessari, R.M. B., Madell, G. (1999) Casing Drilling - A Revolutionary Approach to Reducing Well Costs. u: SPE/IADC Drilling Conference, Amsterdam, Netherlands, 9-11. March
|
|
Warren, T.M., Angman, P., Houtchens, B. (2000) Casing drilling: Application design considerations. u: The SPE/IADC Drilling Conference, held in New Orleans, Louisiana, 23-25. February, 2000, SPE, Proceedings at
|
|
Warren, T.M., Houtchens, B., Madell, G. (2001) Casing drilling technology moves to more challenging applications. u: AADE 2001 National Drilling Conference, held in Omni in Houston, Texas, 27-29. March, 2001, AADE
|
|
Warren, T.M., Lesso, B. (2005) Casing directional drilling. u: AADE 2005 National Technical Conference and Exhibition, held at the Wyndam Greenspoint in Houston, Texas, 5-7. April, 2005, AADE
|
|
Weatherford (2014) Defyer DPA series. [Online] Weatherford. Available from: http://www.weatherford.com/doc/wft154348 [Accessed 01/08/16]
|
|
|
|