태양광 발전시스템의 전력 생산 증대를 위한 Double Band 제어 방식의 적용 및 검증

최종용; 이현재; 박대전; 손진근

doi:10.5370/KIEEP.2023.72.2.106

주제분류

...

저널정보

대한전기학회
전기학회논문지 P 학술저널
전기학회논문지 제72P권 제2호
2023.6 106 - 111 (6page)
DOI : 10.5370/KIEEP.2023.72.2.106

저자정보

최종용 (Gachon University)
이현재 (Gachon University)
박대전 (E&H Corporation)
손진근 (Gachon University)

이용수
내서재: 1

내서재에 추가
되었습니다. 내서재에서
삭제되었습니다.

초록·키워드

오류제보하기

In this paper, we propose a double band control method for increasing power production in a solar power generation system. The double band control method aims to increase power production in the solar power generation system by supplementing various problems of the existing P&O control method. MPPT control is performed so that the solar power generation system can always produce maximum power. Among various MPPT control methods, the most used P&O control method is a method of following MPP by comparing previous voltage and power values with current voltage and power values. A disadvantage of this P&O control method is that power loss occurs according to a voltage reference change value. As a countermeasure against this, the power loss can be minimized by not implementing MPPT by adding the voltage reference change value after finding the MPP point using the double band control method. In addition, to verify this, it was verified through simulation using one PV panel and one flyback converter. Comparative analysis was conducted to obtain the amount of power that can be produced from PV panels under various solar radiation conditions. In addition, a comparative analysis was conducted to obtain the amount of electricity that can be produced from the PV panel when the amount of solar radiation changes. As a result, it was found that the power production increased when the double band control method was used rather than the P&O control method.

#Flyback converter #MPPT #Photovoltaic generation system #PV panel #P& #O control method