메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터

주제분류

정기구독(개인)

소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.

회원혜택

로그인 회원이 가져갈 수 있는 혜택들을 확인하고 이용하세요.

아카루트

학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.

영문교정

영문 논문 작성에 도움을 드리기 위해, 영문 교정 서비스를
지원하고 있어요.

고객센터 제휴문의

...

저널정보

저자정보

표지
이용수
내서재
0
내서재에 추가
되었습니다.
내서재에서
삭제되었습니다.

내서재에 추가
되었습니다.
내서재에서
삭제되었습니다.

이 논문의 연구 히스토리 (7)

초록·키워드

오류제보하기
Recently, the international community is making steady efforts to reduce energy consumption to counter climate change and reduce CO₂ emissions. In view of this trend, there is a high interest in oil-free turbo compressors that are highly efficient in replacing conventional screw compressors and do not generate waste oil in the compressor field. In accordance with this trend, in the field of compressors, there is a high interest in oil-free turbo compressors which can replace existing screw compressors, have high efficiency and do not generate waste oil. In the case of an oil-free turbo compressor, magnetic bearings tend to be applied in a large amount, which has a high rotational stability at high speed and a load capacity capable of coping with a large axial thrust. In this study, magnetic bearings were designed to apply to a compressor of 300-HP and 50,000 rpm, and a rotor in the compressor were designed by direct drive method by applying a permanent magnet synchronous motor. After fabricating a 300-HP compressor with magnetic bearings, the motoring test under the no-load condition without impellers was performed up to 51,000 rpm to evaluate the structural stability against the centrifugal force of the rotating shaft. In addition, the rotational stability was evaluated by motoring test up to 50,000 rpm under the load condition with impellers. Based on the experimental results, it is presented that the hybrid magnetic bearings are suitable oil-free bearings capable of stably supporting turbo compressors.

목차

ABSTRACT
1. 서론
2. 자기베어링이 적용된 터보 압축기의 구성
3. 터보 압축기용 자기베어링 및 회전체의 설계
4. 터보 압축기 제작 및 성능평가
5. 결론
참고문헌

참고문헌 (11)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-554-001355088