Published August 11, 2023
| Version v1
Journal article
Open
Analysis and Modeling of Shear Stress Generated Over Wheel and Rim Material during Interaction with Soil
Creators
- 1. Department of Mechanical Engineering, 2Department of Electrical and Electronics Engineering, Ajay Kumar Garg Engineering College, Ghaziabad, Dr A.P.J. Abdul Kalam Technical University Lucknow, India
- 2. Department of Electrical and Electronics Engineering, Ajay Kumar Garg Engineering College, Ghaziabad, Dr A.P.J. Abdul Kalam Technical University Lucknow, India
Description
This paper represents the findings of its original paper where the center point between wheel and soil is used as a point of reference to study about the generated stress and other mechanical factors. Generally light weight vehicles are used for this study purpose. The traction force which is generated between wheels is responsible for further generation of shear stress. Sand can be studied in two types like dry sand and wet send. Other electronic components can be used to witness the performance of wheel and sand joining lines. Shear stress can be defined as ratio of parallel force to area.
Files
Analysis and Modeling of Shear Stress...pdf
Files
(501.7 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:3431e1ea7c6dbb212c5960bba03adc3b
|
501.7 kB | Preview Download |
Additional details
References
- Tsubaki, H., & Ishigami, G. (2021). Experimental study on wheel-soil interaction mechanics using in-wheel sensor and particle image velocimetry Part I: Analysis and modeling of normal stress of lightweight wheeled vehicles. Journal of Terramechanics, 93, 23-39.
- Hiroki, T., Shirai, T., & Ishigami, G. (2015). Accurate measurement of multidirectional interaction mechanisms between wheel stress and soil deformation using in-wheel sensor and PIV techniques. In Proc. of the 13th European Conf. on the International Society for Terrain Vehicle Systems, Rome, Italy (pp. 97-109).
- Terramechanics-based Analysis and Control for Lunar/Planetary Exploration Robots Ph. D thesis. Tohoku University, Japan. Janosi, Z., Hanamoto, B., 1961. The analytical determination of drawbar pull as a function of slip for tracked vehicles in deformable soils. In: Proc. of the 1st International Conference on Terrain-Vehicle Systems, pp. 707–736.
- Meirion-Griffith, G., & Spenko, M. (2013). A pressure-sinkage model for small-diameter wheels on compactive, deformable terrain. Journal of Terramechanics, 50(1), 37-44.
- Sela, A. D. (1964). The Shear to Normal Stress Relationship Between a Ridgid Wheel and Dry Sand (p. 0081). US Army Tank-Automotive Center
- Senatore, C., & Iagnemma, K. (2014). Analysis of stress distributions under lightweight wheeled vehicles. Journal of Terramechanics, 51, 1-17.
- Shirai, T., & Ishigami, G. (2015). Development of in-wheel sensor system for accurate measurement of wheel terrain interaction characteristics. Journal of Terramechanics, 62, 51-61.
- Karthik, L., Kumar, G., Keswani, T., Bhattacharyya, A., Chandar, S. S., & Bhaskara Rao, K. V. (2014). Protease inhibitors from marine actinobacteria as a potential source for antimalarial compound. PloS one, 9(3), e90972.
- Stamhuis, E., & Thielicke, W. (2014). PIVlab–towards user-friendly, affordable and accurate digital particle image velocimetry in MATLAB. Journal of open research software, 2(1), 30.
- Tsubaki, H., & Ishigami, G. (2016). Modeling of Wheel-Soil Interaction Mechanisms Based on Accurate Measurement of Pressure Distribution for Lightweight Vehicle. In Proc. of the 8th Americas Conf. of ISTVS.