Design 3D CAD data of an oversized-sample 35 GHz EPR resonator with an elevated Q value

Supplemental data for the manuscript 
“Design and performance of an oversized 35 GHz EPR resonator with an elevated Q value”

General information
The CAD dimensions match the dimension of the manufactured resonator/probehead. 
Not depicted in the CAD file are the modulation coils (the modulation coil holders on the sides of the cavity block are shown) and the mechanical connection between the coupling screw on top flange of the resonator and the movable coupling piston at the bottom.

Autodesk Inventor files
The assembly of the whole resonator is stored as “Qband_CW_Probenkopf”. 
All dependent subassemblies and parts can be found in the folder “Q_band_CW_resonator_Inventor”. 

3D files for Open source software
The complete resonator is stored in the file “Qband_CW_Probenkopf.stl”. 
Since in this file all resonator components are merged into a single unit and cannot be depicted on their own, all resonator components are also stored seperately as .obj-files in the folder “Qband_CW_Probenkopf_obj_format”.