Surface Roughness Evaluation for EDM of En31 with Cu-Cr-Ni Powder Metallurgy Tool
Creators
Description
In this study, Electrical Discharge Machining (EDM) is used to modify the surface of high carbon steel En31 with the help of tool electrode (Copper-Chromium-Nickel) manufactured by powder metallurgy (PM) process. The effect of EDM on surface roughness during surface alloying is studied. Taguchi’s Design of experiment (DOE) and L18 orthogonal array is used to find the best level of input parameters in order to achieve high surface finish. Six input parameters are considered and their percentage contribution towards surface roughness is investigated by analysis of variances (ANOVA). Experimental results show that an hard alloyed surface (1.21% carbon, 2.14% chromium and 1.38% nickel) with surface roughness of 3.19µm can be generated using EDM with PM tool. Additionally, techniques like Scanning Electron Microscope (SEM) and Energy Dispersive Spectroscopy (EDS) are used to analyze the machined surface and EDMed layer composition, respectively. The increase in machined surface micro-hardness (101%) may be related to the formation of carbides containing chromium.
Files
9999010.pdf
Files
(703.2 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:ce374fde95851aee55b184cbec927f11
|
703.2 kB | Preview Download |
Additional details
References
- S. Hamilton, 21st Mould making Conference'95—Innovative Technology for Mould Manufacturers & Users, Solihull, UK, Institute of Materials, 1995.
- N. Mohri, N. Saito, Y. Tsunekawa, "Metal surface modification by electrical discharge machining with composite electrode." CIRP Annals Manufacturing Technology, vol. 42, pp. 219-222, 1993.
- L. Li, Y. S. Wong, J. Y. H. Fuh, L. Lu, "EDM performance of TiC copper-based sintered electrodes," Materials and Design, vol. 22, pp. 669-678, 2001.
- J. Simao, D. Aspinwall, F. E. Menshawy, K. Meadows, "Surface alloying using PM composite electrode materials when electrical discharge texturing hardened AISI D2," Journal of Materials Processing Technology, vol. 127, pp. 211–216, 2002.
- D. K. Aspinwall, R. C. Dews, H. G. Lee, J. Slmao, "Electrical discharge surface alloying of Ti and Fe workpiece materials using refractory powder compact electrodes and Cu wire," CIRP Annals Manufacturing Technology, vol. 52, pp. 151–156, 2003.
- C.-Y. .Bai, C.–H. Koo, "Effects of kerosene or distilled water as dielectric on electrical discharge alloying of superalloy Haynes 230 with Al–Mo composite electrode," Surface & Coatings Technology, vol. 200, pp. 4127– 4135, 2006.
- Y. F. Chen, H. M. Chow, Y. C. Lin, C. T. Lin, "Surface modification using semi-sintered electrodes on electrical discharge machining," International Journal of Advanced Manufacturing Technology, vol. 36, pp. 490–500, 2008.
- M. P. Samuel, P. K. Philip, "Properties of compacted, pre-sintered and fully sintered electrodes produced by powder metallurgy for electrical discharge machining," Indian Journal of Engineering and Materials Sciences, vol. 3, pp. 229–233, 1996.
- T. A. El-Taweel, "Multi-response optimization of EDM with Al–Cu–Si–TiC P/M composite electrode," International Journal of Advanced Manufacturing Technology, vol. 44: pp. 100–113, 2009. [10] P. K. Patowari, P. Saha, P. K. Mishra, "Artificial neural network model in surface modification by EDM using tungsten–copper powder metallurgy sintered electrodes," International Journal of Advanced Manufacturing Technology vol. 51, pp. 627–638, 2010. [11] M. E. Krishna, P. K. Patowari, "Parametric optimisation of electric discharge coating process with powder metallurgy tools using Taguchi analysis," Surface Engineering, vol. 29: pp. 703-711, 2013. [12] K. H. Prabhudev, Handbook of Heat Treatment of Steels. New Delhi, India: Tata McGraw Hill Publishing Company, 2000. [13] D. D. DiBitonto, P. T. Eubank, M. R. Patel, M. A. Barrufet, "Theoretical models of the electrical discharge machining process-II: a simple cathode erosion model," Journal of Applied Physics, vol. 66, pp. 4095–4103, 1989. [14] W. Koenig, R. Wertheim, Y. Zvirin, M. Toren, "Material removal and energy distribution in electrical discharge machining," CIRP Annals Manufacturing Technology, vol. 24, pp. 95-100, 1975. [15] M. R. Patel, M. A. Barrufet, P.T. Eubank, D. D. DiBitonto, "Theoretical models of the electrical discharge machining process-II: the anode erosion model," Journal of Applied Physics, vol. 66, pp. 4104–4111, 1989.