World Academy of Science, Engineering and Technology
Published July 23, 2009 | Version 13443
Journal article Open

Comparison between Skyhook and Minimax Control Strategies for Semi-active Suspension System

Creators

Description

This paper describes the development, modeling, and testing of skyhook and MiniMax control strategies of semi-active suspension. The control performances are investigated using Matlab/Simulink [1], with a two-degree-of-freedom quarter car semiactive suspension system model. The comparison and evaluation of control result are made using software-in-the-loop simulation (SILS) method. This paper also outlines the development of a hardware-inthe- loop simulation (HILS) system. The simulation results show that skyhook strategy can significantly reduce the resonant peak of body and provide improvement in vehicle ride comfort. Otherwise, MiniMax strategy can be employed to effectively improve drive safety of vehicle by influencing wheel load. The two strategies can be switched to control semi-active suspension system to fulfill different requirement of vehicle in different stages.

Files

13443.pdf

Files (858.5 kB)

Name Size Download all
md5:a9c8215ba6030d66d0e71b1716215d89
858.5 kB Preview Download

Additional details

References

  • SIMULINK User-s Guide. The MathWorks Inc., 2004.
  • Karnopp, D. C., Crosby, M. J., and Harwood, R. A., 1974, ÔÇÿÔÇÿVibration Control Using Semi-Active Force Generators,-- ASME J. Eng. Ind., 96, No. 2, pp.619-626.
  • Tobias Niemz, "Reducing Braking Distance by Control of Semi-Active Suspension" , Dissertation, Technische Universit├ñt Darmstadt.
  • Crolla, D. A. Vehicle dynamics: theory into practice. Proc. Inst. Mech. Engrs, Part D: J. AutomobileEngineering, 1996, 210, 83-94.
  • Sharp, R. S. and Hassan, S. A. Evaluation of passive automotive suspension systems with variable stiffness and damping parameters. Veh. System Dynamics, 1986, 15(6), 335-350.
  • Cebon, D., Besinger, F. H., and Cole, D. J., Control strategies for semiactive lorry suspensions. Proc.Inst. Mech. Engrs, Part D: J. Automobile Engineering, 1996, 210, 161-178.
  • Wilson, D. A., Sharp, R. S., and Hassan, S. A. The application of linear optimal control theory to the design of active automotive suspension. Veh. System Dynamics, 1986, 15, 105-118.
  • Boot, R. and Richert, J., "Automated Test of ECUs in a Hardware-inthe- Loop Simulation Environment," Proc. of the IEEE ISCACSD, pp. 587-594, 1999.
  • Lee, H. J., Park, Y. K. and Suh, M. W., "Development of Hardware-inthe- loop Simulator for ABS/TCS," Journal of the Korean Society of Precision Engineering, Vol. 16, No. 5, pp. 83-90.