메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터

주제분류

정기구독(개인)

소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.

회원혜택

로그인 회원이 가져갈 수 있는 혜택들을 확인하고 이용하세요.

아카루트

학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.

영문교정

영문 논문 작성에 도움을 드리기 위해, 영문 교정 서비스를
지원하고 있어요.

고객센터 제휴문의

...

저널정보

저자정보

표지
이용수
내서재
0
내서재에 추가
되었습니다.
내서재에서
삭제되었습니다.

내서재에 추가
되었습니다.
내서재에서
삭제되었습니다.

초록·키워드

오류제보하기
동절기 포장에서 제설 및 제빙을 위해 매입된 전극을 사용한 전기전도성 시멘트 복합체(electrically conductive cement composites, ECCC)에 전기 전위(전압)을 인가하면 전류 흐름에 대한 고유의 저항으로 인해 열을 생성한다. 생성된 열은 포장에 쌓인 눈/얼음을 녹이는 데 효과적으로 사용될 수 있다. 본 연구에서는 마이크로 탄소와 매크로 강섬유를 혼입한 시멘트 복합체의 전기적 및 저항 발열 특성을 실험적으로 조사하였다. 더 나아가, 경화된 시멘트 복합체의 미세구조 및 수화생성물에 미치는 영향을 분석하기 위해 주사전자현미경(scanning electron microscope, SEM) 및 열중량 분석(thermo-gravimetric analysis, TGA)을 각각 수행하였다. 실험 결과는 인가전압 및 마이크로 탄소섬유 함량이 증가할수록 저항 발열 특성이 향상되었고, 발열 최대온도는 인가전압이 30 V인 마이크로 탄소섬유를 1.25 % 혼입한 ECCC-CF1.25 시편에서 65.9 °C로 가장 높게 나타났다. 하지만 매크로 강섬유를 1.25 %까지 추가하더라도 저항 발열 특성은 크게 향상되지 못했다. 전기저항은 마이크로 탄소섬유의 함량이 증가함에 따라 상당히 감소한, 반면 매크로 강섬유의 혼입은 전도성 네트워크를 형성되지 못하고 전기저항을 증가시켜 저항 발열 특성이 개선되지 않았다. 경화된 시멘트 복합체의 미세구조 및 수화생성물은 반복적인 전기가열에 의해 상대적으로 변하지 않았으며, ECCC의 안정적인 전기전도성을 유지함을 확인할 수 있었다.

When an electrical potential (voltage) is applied to electrically conductive cement composites (ECCCs) using embedded electrodes for snow removal and deicing of winter pavements, heat is generated due to the inherent resistance to current flow. This generated heat can be effectively used to melt the snow/ice accumulation on the pavements. In this study, experimental investigations were conducted into the electrical and resistance heating properties of cement composites incorporating micro carbon and macro steel fibers. Furthermore, scanning electron microscopy and thermo-gravimetric analysis were performed to analyze their effects on the microstructure and hydration products of the hardened cement composites, respectively. The results showed that resistance heating properties improved with increasing applied voltage and micro carbon fiber content. The highest heating temperature, reaching 65.9 °C, was achieved in the ECCC-CF1.25 specimen, which incorporated 1.25 % micro carbon fibers with an applied voltage of 30 V. However, the addition of macro steel fibers up to 1.25 % did not significantly enhance resistance heating properties. Electrical resistance decreased notably as the micro carbon fiber content increased, while the incorporation of macro steel fibers did not form a conductive network and led to increased electrical resistance, thus not improving resistance heating properties. It was evident that the microstructure and hydration products of the hardened cement composites remained relatively unchanged after repetitive electrical heating, maintaining stable electrical conductivity in the ECCC.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 실험 결과 및 고찰
4. 결론
References
요약

참고문헌 (21)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0