成形加工
Online ISSN : 1883-7417
Print ISSN : 0915-4027
ISSN-L : 0915-4027
論文
銅短繊維混入による高導電性プラスチックの開発
野口 裕之中川 威雄
著者情報
ジャーナル フリー

2000 年 12 巻 2 号 p. 111-114

詳細
抄録

Many researches are being conducted on conductive plastic for use for static electricity prevention and electromagnetic shielding. The aim of this study is to fabricate a power circuit which allows flow of current to a considerable extent using compression molded conductive plastic. First, to minimize the electric resistance of the conductive plastic, experimentations were carried out on the volume resistivity and formability of a compression molded product containing a high amount of short copper fibers in the resin (16∼50vol%).
The results showed that 2.2×10-5Ω·cm volume resistivity can be achieved. In the experiment, the composition was adjusted using commercially available conductive materials. We also studied the heat generation characteristics by passing about 10 ampere current through the compression molded material.

著者関連情報
© 社団法人 プラスチック成形加工学会
前の記事 次の記事
feedback
Top