Article Sidebar
Published:
Sep 23, 2022DOI:
10.4314/njtd.v19i3.8Keywords:
Article Details
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form may be downloaded from the NJTD Website (http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.
Main Article Content
Comparison of Theoretical Disc and Point Source Profiles with Actual-Melt Source Profile in Conduction Welding
Abstract
Prediction of fusion zone in numerical modelling of welds using a modified heat transfer model requires experimental results for validation. Primarily, the modified heat transfer models are developed from the point and disc source heat models which can be assumed to be a semi-circle or spherical shape. In this study, a simple relationship between melt areas, the depth of penetration and weld width was proposed for point and disc source profiles to represent the actual weld profile. The results obtained for focused and defocused laser beams indicate that the actual weld profile is closer to a point source than the disc source. The transition between the conduction and keyhole regimes was achieved when the actual weld depth of penetration is below that of the point source.
