메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터

주제분류

정기구독(개인)

소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.

회원혜택

로그인 회원이 가져갈 수 있는 혜택들을 확인하고 이용하세요.

아카루트

학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.

영문교정

영문 논문 작성에 도움을 드리기 위해, 영문 교정 서비스를
지원하고 있어요.

고객센터 제휴문의

...

저널정보

저자정보

표지
이용수
내서재
0
내서재에 추가
되었습니다.
내서재에서
삭제되었습니다.

내서재에 추가
되었습니다.
내서재에서
삭제되었습니다.

초록·키워드

오류제보하기
Lift-off is considered as one of the most critical parameters that poses a major challenge in the appropriate application of magnetic flux leakage inspection technique. Sediments and welds are presented in the internal of all pipelines and cause lift-off. This paper investigates the influence of lift-off distances on the components of the three-axis MFL technique and, therefore, the lift-off effect on the corrosion detection sensitivity. COMSOL software is used to set up the 3D FEM modeling of three-axis MFL technique. In order to simulate internal pitting corrosion of oil and gas pipelines, two adjacent pits of different depths are modeled on the surface of a carbon steel plate. At a range of lift-off values, MFL responses from this defect geometry are computed and the relationships between the lift-off distances and obtained MFL signals are analyzed in detail. Finally, the validity of the simulation results is verified by experimental tests.

목차

1. Introduction
2. Simulation by 3D FEM
3. Experimental Validation
4. Conclusion
References

참고문헌 (22)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0